SHARP DTE224 Technical Report

Date: Mar. 15, 1996

DUPLICATOR : SD-2060

No. : DTE-224

CHANGES IN P ARTS HAVE BEEN CARRIED OUT TO IMPROVE PRODUCTIVITY

1.Model name: SD-2060/3062

2.General: The materials and method of painting the parts described below have been changed to

improve productivity.

3.Description: (1) A change has been carried out in the material used for the MC springs in the center tray unit. (The change has been carried out on 3 of the 4 MC springs.) [Please refer to the figure shown at right.]

(2) A change has been carried out in the

maker of the HR bearing in the center tray unit. (P/G )

31 -147

(3) A change has been carried out in the

maker of the bushing in the center tray unit.

29 -8

(P/G )

(4) A change has been carried out in the

method of painting the DV stopper of the processor unit. (P/G )

(5) A change has been carried out in the method of painting the 1000 tray of the 1000

tray unit. (P/G )

20 -10

(6) A change has been carried out in the method of painting the 1000 frame A unit of the

1000 tray unit. (P/G )

20 -96

10 -26

(7) A change has been carried out in the materials used for the paper guide of the switch

back unit.

SB Paper guide D (P/G ) SB Paper guide G (P/G ) SB Paper guide C (P/G )

32 -23 32 -24 32 -4

SHARP CORPORATION Reprography Division

1/2

Green

(8) A change has been carried out in the materials used for SB paper guide F of the rear

frame. (P/G )

9 -26

4.Action: Running change from 1995 mid-December production.

Ref.

Model

No.

(1)

(2)

(3)

(4)

SD-2060

(5)

SD-3062

(6) 20 -96 CFRM-0774FC33 CFRM-0774FC34 BF

(7)

(8)

1. Interchangeable. 4. Not interchangeable.

2. C urr e nt t y pe c a n be u s ed i n p la ce of new ty pe . New ty pe cann ot be us ed i n place of curr ent type .

3. C urre nt ty pe cann ot be used i n place of new ty pe. New t y pe c a n be u sed in p lac e of c u r ren t ty p e.

Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

name

Version P/G No.

30 -18 MSPRP1050FCZZ MSPRP2445FCZZ

31 -147

29 -8 LFIX-0371FCZZ LFIX-0498FCZZ AC Bushing Q‘ty: 4

10 -26 LSTPF0288FCZZ LSTPF0288FCZ1 AK DV stopper

20 -10 LSOU-0111FCZ2 LSOU-0111FCZ3 BA 1000 Tray

All

32 -23 PGIDH1423FCZZ PGIDH1423FCZ1 AR SB paper gui de D

32 -24

32 -4 PGIDH-1422FCZZ PGIDH-1422FCZ1 AL SB paper guide C

9 -26

Current parts New parts

Parts code Parts code

LFIX-0233FCZ1 LFIX-0499FCZZ Suction bushing

PGIDH1424FCZZ PGIDH1424FCZ1 AH SB paper g uide G

PGIDH-1425FCZZ PGIDH-1425FCZ1 AS SB paper g uide F

Price

5. Interchangeable if replaced with same types of relate d parts in use .

6. Others.

Parts name

rank

Suction spring

1000 Frame A unit

Effec-

tive

time

See

text

Inter-

change-

ability

Note

Q‘ty: 3

2/2