SHARP DTE220 Technical Report

Date: Dec. 15, 1995

DUPLICATOR : SD-3062

No. : DTE-220

REGARDING NOISE REGULATIONS
(CE-MARK)

1.Model Name: SD-3062

3.General: In order to comply with noise (CE-mark) regulations, we are making changes and

additions to RDH parts. These changes are only required for the European versions,
but some of the changes will apply to all versions.

4.Description:

(1) Added clamp filter A (SEEG and UK versions)

(2) Added clamp filter B (SEEG and UK versions)

(5) Added conductive latch (Except for SEEG and UK versions)

Length size switch fixing angle

(3) Added moving anti-static board spring
(SEEG and UK versions)

(4) Added M3 x 4 screws
(SEEG and UK versions)

(6) Changes made to the length size switch fixing angle (all versions)

SHARP CORPORATION Reprography Division

1/3

Green

C

(7) Changes to the screws (all versions)

(8) Added magnet catch ground board (SEEG and UK versions)

Magnet catch

(9) Changes to the delivery motor (all versions)
(10) As a result of the changes mentioned above, a new RDH unit has been established

for the SEEG and UK versions.

3.Action: From the first unit of July, 1995 production on.

2/3