Date: Jul. 24, 1995
DUPLICATOR: SD-2060
1. CHANGE IN METHOD OF PAINT APPLICATION TO THE OPTICAL BASE PLATE TO
IMPROVE PRODUCTIVITY.
2. CHANGE IN THE SUPPLIER OF THE IC IN THE MAIN PWB TO IMPROVE PRODUCTIVITY.
3. CHANGE IN SCREWS IN THE RADF UNIT TO PREVENT CONTACT WITH THE CABINET.
4. CORRECTION OF SOME OF THE PARTS GUIDE ENTRIES.
No. : DTE-207
1. Change in method of paint application to the optical base plate to improve productivity.
1.Model name: SD-2060/3062
2.General: The method of paint application to the optical base plate has been changed to improve
productivity. (electro deposition of black paint has been changed to SECC-T2J). In
accordance with this change, MB-B rail has simultaneously been changed. A bushing
has also been added to protect the harness.
3.Description:
4.Action: From the start of 1995 May production.
Bushing
Base
Base
2. Change in the supplier of the IC in the main PWB to improve productivity.
1.Model name: SD-2060/3062
SHARP CORPORATION Reprography Division
1/4
Green
C
2.General: The supplier for the IC used in the main PWB (IC 116) has been changed to improve
productivity. In accordance with this change the parts code has also been changed.
3.Action: Running change from 1995 April production.
3. Change in screws in the RADF unit to prevent contact with the cabinet.
1.Model name: SD-2060
2.General: The screws in the RADF unit had been coming in contact with the cabinet and the other
screws. Washers were also stacked in some locations. To alleviate these problems,
the screws have been changed.
3.Description: (1) Because the screws were coming in contact with the original document detection
cabinet, they were changed to shorter screws. In accordance with this change, tapping
screws were necessary for the side plate R assembly and the side plate R assembly
has therefore also been changed.
(2) Screws were coming in contact with each other and washers had been stacked, and
the screws were therefor changed.
(1)
(2)
Side plate R ass’y
4.Action: (1) Running change from 1994 December production.
(2) Running change from 1995 January production.
2/4
4. Correction of some of the parts guide entries.
1.Model name: SF-2060
2.General: Mistakes and omissions have occurred in the parts guide, and the following corrections
are requested.
3.Description: (1) Parts code errors.
(Error) (Correct)
45 -3 0CW2176K210E/ → 0CW2176K209C/
(2) Error in the specified location (please refer to the figure below).
45 -30 0CW2176K208D/ (ASM-Tray width)
(3) Omission (please refer to the figure below).
0CW2176K210E/ (ASM-Tray inter face harness).
Omission
3/4
Ref.
Model
No.
1
SD-2060
SD-3062
2
3
(1)
3
SD-2060
(2)
4
(1)
4
(3)
<Interchange>
1. Interc ha ng ea bl e. 4. N ot i nt er ch an ge ab l e.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with
specifi e d on es fo r m ain ta in i ng t he s a fe ty an d pe r fo rma nc e o f th e s et .
name
Version P/G No.
5 -28
5
77 -81 VHI28C64-15-1 VHIAT28C64B-1 AZ IC [IC116]
43
All
43 -31 0CW2176K008D/ 0CW2176K008E/ BF
43 -51
45 -3 0CW2176K210E/ 0CW2176K209C/ AY
45 — 0CW2176K210E/ AX
!
Current parts New parts
Parts code Parts code
LRALM0114FCZZ LRALM0114FCZ2 AK MB-B rail F
— LBSHZ2052SCZZ AC Busing
0CW2164P340A/
(Q’ty: 1)
0CW026050FZWS
(Q’ty: 4)
0CW040050FZ1T
(Q’ty: 1)
0CW026050FZSW
(Q’ty: 4)
Price
5. Interchangeable if replaced with same types of
relate d parts in use .
6. Others .
Parts name
rank
AB Screw
Side plate R
ass’y
AC Screw
ASM tray
interface harness
ASM tray
interface harness
Effec-
tive
time
1st lot
’95/5
1st lot
’95/5
See
text
See
text
See
text
See
text
—6
—6*2
Inter-
change-
ability
1
—
1
3
1
3
Note
*1
*1 Parts guide corrections only.
*2 Parts guide omission.
4/4
Loading...