SHARP DTE194 Technical Report

Date: Dec. 16, 1994

DUPLICATOR: SD-2060

1. CHANGE OF SIZE INDICA TING LABEL FOR MANUAL FEEDING

2. CHANGE IN FORM OF ADJUSTING PLATE SHEET (TO PREVENT PAPER JAM)

3. TECHNICAL REPORT CORRECTION

No. : DTE-194

1. Change of size indicating label for manual feeding

1.Model name: SD-2060, 3062

2.General: The length of size indicating label for manual feeding was so long that it has been cut.

You can commonly use both current and new labels.

3.Action: From mid-June 1994 production (running change)

2. Change in form of adjusting plate sheet (to prevent paper jam)

1.Model name: SD-3062

2.General: We attached the adjusting plate sheet to the FIN adjusting plate inside the finisher to

prevent paper damaged in the technical report DTE-183. We found that paper jammed possibly happened in the staple mode. Therefore we have prevented it by enhancing margins.

3.Description: We have prevented paper jam by changing in the form of the adjusting plate sheet.

Jogger sheet

Standard

A section

Standard

FIN adjusting plate

FIN adjusting plate Adjusting plate sheet

Jogger sheet

0.5

A section

Standard

±0.5

4.Action:

Current

From the first unit of September 1994 production

SHARP CORPORATION Reprography Division

New

1/2

Green

3. Technical report correction

1.Model name: SD2060, 3062

2.General: There is an incorrect description in a part code of the parts list in the technical report

DTE-184. Please correct it.

Incorrect

Correct NGERH0928FCZ1

Ref.

Model

No.

SD-2060 SD-3062

3 SD-2060

1. In te rc ha ng ea bl e. 4. Not i nt er ch an ge ab l e.

2. Current type can be used in place of new type. New type cannot be used in place of current type.

3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with

s p ec ifi e d on es fo r m aintaini ng t he s a fe ty an d pe rf o rma nc e o f th e s et .

name

Version P/G No.

11 -11

7 -76

36 -13

All

36 -2 PDUC-0076FCZZ PDUC-0076FCZ1 AM Suction duct B

43 -28

43 -29 0CW2176K205D/ 0CW2176K205E/ CE

Current parts New parts

Parts code Parts code

NGERH0928FCZZ NGERH0298FCZ1 AH Drum gear 98TN

GLEGM0057FCZZ GLEGM0060FCZZ AY Caster

PSPAZ0622FCZZ

(Q’ty: 2)

0CW2176K204E/ 0CW2176K204F/ AZ EP ROM ass’y

(Discontinued) — SC spacer

Price

5. Interchangeable if replaced with same types of relate d parts in use .

6. Ot he rs .

Parts name

rank

PBA control PWB

Effec-

tive

time

Mid-

’94/7

1st lot

’94/8

Mid-

’94/8

Mid-

’94/8

1st lot

’94/8

1st lot

’94/8

Inter-

change-

ability

Note

2/2

* Four parts are set and they are interchangeable among them.

Ref.

Model

No.

SD-2060

SD-3062

2 SD-3062 All

1. In te rc ha ng ea bl e. 4. Not i nt er ch an ge ab l e.

2. Current type can be used in place of new type. New type cannot be used in place of current type.

3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with

s p ec ifi e d on es fo r m aintaini ng t he s a fe ty an d pe rf o rma nc e o f th e s et .

name

Version P/G No.

38 -1 TLABZ3279FCZZ TLABZ3279FCZ1 AE

series

Inch

38 -1 TLABZ3280FCZZ TLABZ3280FCZ1 AE

series

52 PSHEP3729FCZZ PSHEP3729FCZ1 AB

Current parts New parts

Parts code Parts code

5. Interchangeable if replaced with same types of

6. Ot he rs .

Price

relate d parts in use .

Parts name

rank

Manual feeding size label

Adjusting plate sheet

Effec-

tive

time

See text.

1st lot

’94/9

Inter-

change-

ability

Note