SHARP DTE193 Technical Report

Date: Nov. 8, 1994

DUPLICATOR : SD-3062

No. : DTE-193

PREVENTION OF BREAKAGE IN THE PF PAPER GUIDE LOCA TED IN THE UDH PAPER SUPPLY

1.Model name: SD-3062

2.General: The fastening boss in the PF paper guide located in the UDH paper supply has been

found to break. Provisional changes to prevent breakage have been made as follows.

3.Description: ➀ Changes to fastening screw torque

Current New

(Fastening screw torque) 16~18 Kg-Cm → 10~ 12 Kg-Cm

➁ Addition of protective washer to reinforce boss

Boss protective washer

59 -27 PF paper guide

Boss protective washer

Press fit washer

Note: Press fit washer in the correct direction

Press fit boss into edge

4.Action: September 1994, 1st unit

SHARP CORPORATION Reprography Division

REdge

Burr direction

1/2

Green

Ref.

Model

No.

SD-3062 All

1. Interc ha ng ea bl e. 4. N ot i nt er ch an ge ab l e.

2. Current type can be used in place of new type. New type cannot be used in place of current type.

3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with

speci fied on es fo r m ai n ta in ing the sa fe ty an d pe r fo r ma nce o f the set .

name

Version P/G No.

59 —

Current parts New parts

Parts code Parts code

0EUPLT0326D//

(Q’ty: 4)

5. Interchangeable if replaced with same types of

6. Others .

Parts name

Price

rank

Boss protective

washer

relate d parts in use .

Effec-

tive

time

1st lot

’94/9

Inter-

change-

ability

Note

2/2