SHARP DTE188 Technical Report

Date: Sep. 22, 1994

DUPLICATOR: SD-F200

No. : DTE-188

PARTS CODE CHANGES IN STAPLER UNIT

1.Model name: SD-F200, F201

2.General: We have changed the parts code of the stapler unit inside the finisher due to changes

listed below was carried out.

3.Description: ➀ Change in forms of horizontal pins for fixing the needle cartridge and the spring hook

(improvement of margins)

➁ Changes of the motor caps and the gear (compatibly used parts with SD-3062) ➂ Change of the manufacturer of the stapler HP sensor (parts change due to

discontinuance of production)

The stapler is used compatibly because there is no change in function between new and old parts.

4.Action: From the first unit of July 1994 production

Ref.

Model

No.

SD-F200

SD-F201

1. Interc ha ng ea bl e. 4. Not int erc h an ge ab l e.

2. Current type can be used in place of new type. New type cannot be used in place of current type.

3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with

speci fied ones fo r mai n ta in i ng t he s a fe ty an d pe rf o rma nc e o f th e s et .

name

Version P/G No.

51 -67 0BL94X-80204/ 0BL94X-80205/ CH Stapler main unit

All

Current parts New parts

Parts code Parts code

5. Interchangeable if replaced with same types of

6. Others.

Price

relate d parts in use .

Parts name

rank

Effec-

tive

time

1st lot

’94/7

Inter-

change-

ability

Note

SHARP CORPORATION Reprography Division

Green