SHARP DTE184 Technical Report
Date: Sep. 22, 1994
DUPLICATOR: SD-2060
1. CHANGES OF MANUFACTURERS OF DRUM GEAR AND CASTER
(TO IMPROVE PRODUCTIVITY)
2. CHANGES OF THE MOLD FORM OF SUCTION DUCT UNIT DUE
TO DISCONTINUANCE OF SC SPACER
3. CHANGE OF RADF TO IMPROVE TO LET PAPER THROUGH
No. : DTE-184
1. Changes of manufacturers of drum gear and caster (to improve productivity)
1.Model name: SD-2060, 3062
2.General: We have changed manufacturers of the drum gear 98T and the caster in order to
improve productivity. Parts code also has been changed due to this change.
After change has been carried out in the machine with caster, its height has become
taller about 5mm. Therefore please arrange the height when you attach the sorter
(SF-S53). It is explained in the sorter attachment manual.
3.Action: Change of the drum gear: From the first unit of August 1994 production
Change of the caster: From the first unit of August 1994 production
2. Changes of the mold form of suction duct unit due to discontinuance of SC spacer
1.Model name: SD-2060, 3062
2.General: We have discontinued two of SC spacers used in the suction unit. We have changed
the form of the mold of the suction duct B due to this change.
3.Action: From mid-August 1994 production (running change)
3. Change of RADF to improve to let paper through
1.Model name: SD-2060
2.General: We have changed the ROM software of the RADF control PWB to improve following
conditions.
Green
C
SHARP CORPORATION Reprography Division
1/2
➀ RADF jam occurred when you press the CA key on during copying in the double side
to single side copy mode.
➁ Z folding occurred during copying in the double side copy mode.
➂ The warning display U5-00 due to breakage of the RADF paper feeding motor driver
has been changed to U5-11.
3.Description: We have changed the contents of the ROM software of the RADF control PWB and its
parts code.
Due to the change of the ROM unit, the parts code of the RADF control PWB has been
changed. Only the ROM unit has been changed in the RADF control PWB in this
change.
ROM version V1.03 → V1.04
4.Action: From the first unit of August 1994 production
Ref.
Model
No.
1
SD-2060
SD-3062
2
3 SD-2060
<Interchange>
1. Interc ha ng ea bl e. 4. N ot i nt er ch an ge ab l e.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with
speci fied ones fo r m ain ta in i ng t he s a fe ty an d pe r fo rma nc e o f th e s et .
name
Version P/G No.
11 -11 NGERH0928FCZZ NGERH0298FCZ1 AH Drum gear 98TN
7 -76
36 -13
All
36 -2 PDUC-0076FCZZ PDUC-0076FCZ1 AM Suction duct B
43 -28 0CW2176K204E/ 0CW2176K204F/ AZ EP ROM ass’y
43 -29 0CW2176K205D/ 0CW2176K205E/ CE
!
Current parts New parts
Parts code Parts code
GLEGM0057FCZZ GLEGM0060FCZZ AY Caster
PSPAZ0622FCZZ
(Q’ty: 2)
(Discontinued) — SC spacer
Price
5. Interchangeable if replaced with same types of
relate d parts in use .
6. Others.
Parts name
rank
PBA control
PWB
Effec-
tive
time
Mid-
’94/7
1st lot
’94/8
Mid-
’94/8
Mid-
’94/8
1st lot
’94/8
1st lot
’94/8
Inter-
change-
ability
1
1
5
5
3
3
Note
*
2/2
* Four parts are set and they are interchangeable among them.
Loading...