SHARP DTE183 Technical Report

Date: Sep. 9, 1994
,,
,,

DUPLICATOR : SD-3062
No. : DTE-183
1.PREVENTION OF DAMAGE TO PAPER
2.CHANGE OF COLLAR FOR PADDLE
3.CORRECTION OF TECHNICAL REPORT
1. Prevention of damage to paper
1.Model name: SD-3062
2.General: The fin adjustment plate used in the finisher caused damage to the paper during
transportation on rare occasion. Therefore we have improved this.
3.Description: We have attached the adjustment plate sheet to the fin adjustment plate as shown in illustration below.
44
50
Notes for attachment:
• Attach the jogger sheet first and then the adjustment sheet. Be sure not to make gaps between these sheets.
• Be sure to keep the end of the adjustment sheet contact with the stapler tray when you mount the fin adjustment plate to the stapler tray unit.
• Be sure not to float the part A when you attach the adjustment sheet.
Fin adjustment plate
Adjustment plate sheet
Jogger sheet
Base line
Section A
Base line
4.Action: From mid-June 1994 production
SHARP CORPORATION Reprography Division
1/3
Green
C
2. Change of collar for paddle
1.Model name: SD-3062
2.General: We once had changed one of the paddle’s collars (rear side) inside the finisher.
(Please refer to the technical report DTE-136.) However we have continued to use the old type of the paddle’s collar (front side) till the storage exhaust. Now the storage is exhausted. We change the collar at the front side also.
3.Description:
φ50
+0.1
3
0
6
+0.07
0
+0.02
φ8
+0.1
3
0
6
Fill the four grooves up
φ50
+0.07
0
+0.02
φ8
Current
New
4.Action: From mid-July 1994 production
3. Correction of technical report
1.Model name: SD-2035
2.General: An incorrect part code was found in the technical report No. DTE-136. Please correct it.
Incorrect code
Ref.
No.
1
2
3
Model
name
SD-3062
Version P/G No.
50 -114
47 -10 PSHEP3627FCZZ
All
50 -98 LX-WZ0057FCZZ Q’ty change Flat washer
50 LX-WZ0016FCZZ AB Washer Q’ty: 1
50 -100 LX-WZ0096FCZZ LX-WZ0016FCZZ AB Washer Q’ty: 1
Current parts New parts
Parts code Parts code
PCLR-0395FCZZ PCLR-0395FCZ1 AE Paddler collar
PSHEP3663FCZZ AC
PSHEP3664FCZZ AE
Price
Parts name
rank
PWB cover
sheet A
PWB cover
sheet B
Effec-
tive
change-
time
See text.
’94/1 5
Inter­ability
6
5
Note
Q’ty:
2 to 1
2/3
4
5 U.K. 86 -37 TINSE1116FCZZ TINSE1117FCZZ AX
55 -32 LFRM-0798FCZ2 LFRM-0798FCZ3 BA Tray frame 1st lot. 1
Correct
LX-WZ0019FCZZ AA
Operation
manual
’94/4 a
Ref.
Model
No.
1
SD-3062 All
2
<Interchange>
1. Interc ha ng ea bl e. 4. N ot i nt er ch an ge ab l e.
2. Current type can be used in place of new type. New type cannot be used in place of current type.
3. Current type cannot be used in place of new type. New type can be used in place of current type.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with
s p eci fi e d on es fo r m ain ta in i ng t he s a fe ty an d pe r fo rma nc e o f th e s et .
name
Version P/G No.
52 PSHEP3729FCZZ AB
50 -114 PCLR-0395FCZZ PCLR-0395FCZ1 AE Collar for paddle
!
Current parts New parts
Parts code Parts code
5. Interchangeable if replaced with same types of
6. Others .
Price
relate d parts in use .
Parts name
rank
Adjustment
plate sheet
Effec-
tive
time
Mid-
’94/6
Mid-
’94/7
Inter-
change-
ability
* Correction is applied only for the front side. The rear side has already changed before.
Note
*
3/3
Loading...