SHARP DTE177 Technical Report
Date: Jul. 13, 1994
DUPLICATOR : SD-2060
1. PREVENTION OF BREAKAGE IN THE PS ROLLER INSIDE THE TRANSPORT UNIT
2. CHANGES TO PARTS CODE DUE TO MATERIAL CHANGES OF THE FU DUCT A
(TO IMPROVE PRODUCTIVITY)
3. TO MAKE CERTAIN THE FIXING POSITION ON THE PUSHER UPPER SWITCH
FIXIN G PL ATE
No. : DTE-177
1. Prevention of breakage in the PS roller inside the transport unit
1.Model name: SD-2060, 3062
2.General: We made changes as follows to strengthen the shaft of the PS roller lower used in the
transport unit.
3.Description: We cut the corner of milled part in the PS roller lower roundly, and enhanced the core
diameter next to the corner to strengthen the shaft.
(Current) (New)
R side
The PS roller lower C16
↓
φ6
φ6.7
Add the round corner R1.5
4.Action: From the first unit of June 1994 production.
2. Changes to parts code due to material changes of the FU duct A
(To improve productivity.)
1.Model name: SD-2060, 3062
2.General: To improve productivity , we changed the FU duct A material from ABS to PS-V2 and
changed parts code.
Green
C
SHARP CORPORATION Reprography Division
1/2
4.Action: From the first unit of June 1994 production.
3. To make certain the fixing position on the pusher upper switch fixing plate
1.Model name: SD-3062
2.General: The fixing position on the pusher upper switch fixing plate fixed to the finisher unit was
uncertain therefore we made changes as follows.
3.Description: We changed forms of the screw hall on the fixing plateto make certain the fixing
position from the orb round hall to the circle hall.
(Current) (New)
4.Action: From the first unit of June 1994 production.
Ref.
Model
No.
1
SD-2060
SD-3062
2
3 SD-3062
<Interchange>
1. Inter cha ng ea bl e. 4. Not int er ch an ge ab l e.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with
speci fied ones fo r m aintaini ng t he s a fe ty an d pe rformance of the set .
name
Version P/G No.
15 -25 NROLR0948FCZ1 NROLR0948FCZ2 AZ PS roller lower
All
37 -1 PDUC-0077FCZZ PDUC-0077FCZ1 AR FU duct A
52 -10 LPLTM4484FCZZ LPLTM4484FCZ1 AC
!
Current parts New parts
Parts code Parts code
Change to the circle hall
Effec-
Price
5. Interchangeable if replaced with same types of
relate d parts in use .
6. Others .
Parts name
rank
Pusher upper
switch fixing plate
tive
time
1st lot
’94/6
1st lot
’94/6
1st lot
’94/6
Inter-
change-
ability
3
1
1
Note
2/2
Loading...