Sharp LE650U, C6500U, LE642Ul UQ17U, TQ16U, SQ17U Operation Manual

...

Contents

Part Names

1-1. TV (For the UQ, TQ, SQ, EQ, LE650U, C6500U, LE657U and LE642U models) 1-2. TV (For the UD1U model) 1-3. Remote Control Unit

2. Watching TV

2-1. Displaying an External Equipment Image 2-2. Initial Installation

3. Direct Button Operation

3-1. Changing Channels 3-2. Changing Volume 3-3. MUTE 3-4. FREEZE 3-5. FLASHBACK 3-6. SmartCentral 3-7. NETFLIX 3-8. AUDIO 3-9. Sleep Timer 3-10. AV MODE 3-12. Closed Captions and Digital Closed Captions 3-14. VIEW MODE

4. On-Screen Display Menu

4-1. Introduction 4-3. On-Screen Display Menu Operation 4-4. Menu Operation Buttons 4-5. Picture Settings 4-11. Audio Settings 4-13. Setup 4-22. Smart TV 4-27. System Options 4-32. Information

5. Enjoying 3D Image Viewing (For the UQ17U, TQ15U, SQ17U, SQ15U, LE657U and UD1U models)

5-1. Information 5-2. Preparing for the 3D glasses 5-3. Using the 3D glasses 5-5. Specifications - 3D glasses (sold separately) 5-6. Troubleshooting - 3D Images 5-7. Display Methods for 3D and 2D Images 5-8. Viewing 3D Images 5-11. Configuring the TV Setting to Enhance 3D Image Viewing

6. Enjoying Photo/Music/Video Playback

(Except for UD1U) 6-1. Preparation 6-2. Selecting the Folders to Play Back 6-4. Playing Back Files on a USB Memory Device/Home Network Server 6-13. Playing Back Files from a Portable Device or PC 6-14. Presetting Remote Control Function 6-17. Operating the Connected Equipment

(For the UD1U model) 6-18. Preparation 6-19. Selecting the Folders to Play Back 6-21. Playing Back Files on a USB Memory Device/Home Network Server 6-30. Playing Back Files from a Portable Device or PC 6-31. Presetting Remote Control Function 6-34. Operating the Connected Equipment

7. Using AQUOS LINK

7-1. Controlling HDMI Equipment Using AQUOS LINK 7-4. Link Operation Menu 7-6. Using a Smartphone with the TV

8. Using a PC

8-1. Adjusting the PC Image 8-2. Setting Audio Input 8-3. Control of the TV 8-9. PC Compatibility Chart

9. Using the Internet

9-1. Connecting to the Internet 9-2. Internet Setup 9-5. Entering Text (Software Keyboard) 9-7. Using the Browser 9-11. Using Keyboard and Mouse 9-12. Using Applications via the Internet 9-15. Notes

10. Using the Bluetooth /Miracast devices

10-1. Bluetooth devices (For the UQ17U, TQ15U, SQ17U, SQ15U, SQ10U, LE657U and UD1U models) 10-2. Miracast devices (For the UQ17U, TQ15U, SQ17U, SQ15U, SQ10U, EQ10U and UD1U models)

11. Appendix

11-1. Removing the Stand 11-2. Setting the TV on the Wall 11-7. Troubleshooting 11-9. Troubleshooting - 3D Images 11-10. Troubleshooting - Error Message 11-11. Information on the Software License for This Product

12. Specifications

12-1. TV (For the UQ17U models) 12-2. TV (For the TQ15U models) 12-3. TV (For the SQ17U, SQ15U and SQ10U models) 12-4. TV (For the EQ10U models) 12-5. TV (For the LE650U and C6500U models) 12-6. TV (For the LE657U model) 12-7. TV (For the LE642U model) 12-8. TV (For the UD1U model) 12-9. Wireless LAN 12-10. Bluetooth (For the UQ17U, TQ15U, SQ17U, SQ15U, SQ10U, LE657U and UD1U models)

13-1. Trademarks 14-1. Dimensional Drawings

The dimensional drawings for the LCD TV set are shown

on the inside back cover.

ENG Contents

(Front)

*1 *2

(Side)

(Rear)

*1 See the Setup Guide. *2

*3 For EQ10U, LE650U, C6500U and LE642U models:

*4 For UQ17U, TQ15U, SQ17U, SQ15U and SQ10U models:

Part Names

TV (For the UQ, TQ, SQ, EQ, LE650U, C6500U, LE657U and LE642U models)

See page 4-6. See page 4-31.

See pages 2-1, 4-4 and 4-31 for button operations.

And see page 7-1 for external equipment connection. See page 8-2 for details on the Audio Select function.

Use HDMI IN 1 to connect ARC-compatible equipment. For UQ17U, TQ15U, SQ17U, SQ15U, SQ10U and LE657U models: Use HDMI IN 3 to connect ARC-compatible equipment.

Connect 4K signals (HDCP2.2) to the HDMI IN 1 terminal. (4K60P is not supported.)

See page 7-6.

The illustrations and on-screen displays in this operation manual are for explanation purposes

and may vary slightly from the actual operations.

The examples used throughout this manual are based on the LC-60LE650U model.

ENG 1-1

(Front)

*1 *2

(Side)

*1 *2

(Rear)

*1 See the Setup Guide. *2

*3 Use HDMI IN 3 to connect ARC-compatible equipment. *4 Connect 4K signals (HDCP2.2) to the HDMI IN 1 terminal. *5

Part Names

TV (For the UD1U model)

See page 4-6. See page 4-31.

See pages 2-1, 4-4 and 4-31 for button operations. See page 6-18.

And see page 7-1 for external equipment connection. See page 8-2 for details on the Audio Select function.

See page 7-6.

The illustrations and on-screen displays in this operation manual are for explanation purposes

and may vary slightly from the actual operations.

ENG 1-2

Part Names

1 2

Switches the remote control for TV, STB, BD, DVD, VCR and AUDIO operation.

(See pages 6-14 to 6-17 for details.)

* To enter the code registration mode, you need to press an appropriate button (

AUDIO 3 4 5

LINK is used.

(See pages 7-1 to 7-5 for details.)

(See page 3-9.)

(See page 3-1.)

(See pages 3-1

(See page 3-12 to 3-13)

(See page 3-10.)

(See page 3-3.)

(See page 3-2.)

(See page 4-1.)

Select between 3D and 2D image viewing.

(See pages 5-8 to 5-10 for details.)

SQ10U, EQ10U, LE650U C6500U and LE642U models: This can only be used for some functions.

(See pages 5-9 to 5-10 for details.)

15 16 17

(See page 4-15.)

While watching, you can toggle the selected channels by pressing

19 20

Remote Control Unit

POWER: Switch the TV power on or enter standby. TV, STB, DVD•VCR, AUDIO:

NOTE

When using the remote control unit,

point it at the TV.

The appearance of the remote control

unit varies by the time when you purchased the product.

) and DISPLAY at the same time.

STB, DVD•VCR or

External equipment operational buttons: Operate the external equipment. DISPLAY: Display the channel information. OPTION: Display the Link Operation Menu screen. This button will function only when AQUOS

SLEEP: Set the sleep timer.

0–9: Set the channel.

• (DOT): Set the channel. and 6-17.)

CC: Display captions from a closed-caption source.

AV MODE: Select an audio or video setting.

MUTE: Mute the sound.

VOL+/-: Set the volume.

MENU: Display the menu screen.

2D/3D: UQ17U, TQ15U, SQ17U, SQ15U, LE657U and UD1U models:

/ / / , ENTER: Select a desired item on the screen. EXIT: Turn off the menu screen. FAVORITE CH: Set the favorite channels.

A, B, C, D: Select 4 preset favorite channels in 4 different categories.

A, B, C and D. MANUAL: Display the operation manual. POWER (SOURCE): Turns the power of the external equipment on and off.

ENG 1-3

Part Names

(See page 3-4.)

(See page 3-8.)

23 24

(See page 3-5.)

(See pages 3-14 to 3-16.)

(See page 2-1.)

(See page 3-1.)

(See page 3-6.)

29 30

If you press the NETFLIX button when the TV is is displayed.

(See page 3-7.)

(See pages 9-7

Remote Control Unit (Continue)

FREEZE: Set the still image. Press again to return to normal screen.

AUDIO: Selects the MTS/SAP or the audio mode during multichannel audio broadcasts.

ENT: Jumps to a channel after selecting with the 0–9 buttons. FLASHBACK: Return to the previous channel or external input mode.

VIEW MODE: Select the screen size.

INPUT: Select a TV input source.

CH / : Select the channel.

SmartCentral: Display the application window.

RETURN: Return to the previous menu screen. NETFLIX: Display the Netflix screen.

turned off, the TV turns on and the NETFLIX screen

FAV APP 1, 2, 3: You can assign your favorite applications to these buttons.

, 9-12.)

NOTE

When using the remote control unit,

point it at the TV.

The appearance of the remote control

unit varies by the time when you purchased the product.

ENG 1-4

Watching TV

To view external source images, select the input source by pressing unit or on the TV.

Displaying an External Equipment Image

INPUT on the remote control

Example

You can also select the input source by pressing INPUT. Each time INPUT is pressed, the input source toggles.

1 Press INPUT.

The INPUT list screen displays.

2 Press / to select the input source.

An image from the selected source

automatically displays.

If the corresponding input is not plugged

in, you cannot change the input. Be sure to connect the equipment beforehand.

ENG 2-1

Watching TV

Initial Installation

When you turn on the TV for the first time, it will automatically memorize the broadcasting channels available in the region where you live. Perform the following steps before you press

POWER on the remote control unit.

1. Insert the batteries into the remote control unit.

2. Connect the antenna cable to the TV.

3. Plug in the AC cord to the AC outlet.

Language (Language setting)

Select from among 3 languages: English, French and Spanish.

1 Press / to select the desired language listed on the

screen, and then press ENTER.

Location & Time

Make settings for the country, area and time zone where you use the TV.

2 Press / to select "United States", "Canada" or "Mexico",

and then press ENTER.

3 Press / to select the time zone where you are using the

TV, and then press ENTER.

Example

ENG 2-2

The time zone differs depending on the selected

country.

The factory preset value is the time zone for the capital

of the selected country.

Watching TV

Initial Installation (Continue)

4 Press / to select the Daylight Savings Time, and then

press ENTER.

"Auto" is the default selection.

TV Location

Select "Home" or "Store" for the location where you plan to install the TV. This product qualifies for ENERGY STAR*1 in Home mode default setting.

5 Press / to select "Home" or "Store".

Press ENTER to enter the setting.

Home: "Power Saving" is set to "Advanced", and AV MODE

is set to "STANDARD (ENERGY STAR)*1".

Store: "Power Saving" is set to "Off" and AV MODE is set to

"DYNAMIC (Fixed)". Picture Reset and Feature Demo can be set.

Picture Reset: AV MODE will be set to "DYNAMIC (Fixed)" regardless of whether Picture Reset is "On" or "Off".

If you select "On" and there is no operation for 30 minutes:

- AV MODE will be reset to "DYNAMIC (Fixed)".

- When a 3D signal is detected, 3D images will switch to 2D images. (For the UQ17U, TQ15U, SQ17U, SQ15U, LE657U and UD1U models.)

When "Off" is selected:

- AV MODE will be set to "DYNAMIC (Fixed)".

Feature Demo: When "On" is selected, after all the settings are completed, the Feature Demo screen is displayed if there is no operation for several minutes.

NOTE

ENERGY STAR qualification is based on AV MODE

"STANDARD (ENERGY STAR)*1". *1: Except for LE657U and UD1U

ENG 2-3

Watching TV

Initial Installation (Continue)

Antenna & Cable/STB

Select the type of connection you will use to watch TV.

6 Press / to select "Antenna & Cable" or "Set-top box",

and then press ENTER.

To watch TV via an antenna or cable connection (without using a set-top box):

Select "Antenna & Cable", and then go to step 7. To watch TV via a set-top box:

Select "Set-top box", and then press ENTER. Check that the set-top box connected to the TV is on. Press / to select the input to which the set-top box has

been connected.

If your Set-top box is turned off, "Disconnected" might be

shown.

To watch TV, select the input source corresponding to the terminal connected to the set-top box. When doing so, you must make the setting to skip "TV". Press / to select "On", and then press ENTER.

When this is set to "On", the channel on the TV cannot be

changed using the remote control unit or menu. (e.g. CH

/ , Favorite CH, etc.)

See page 4-20 for details on the Input Skip function.

Press INPUT to select the input source corresponding to the terminal connected to the set-top box. Make the necessary settings on the connected external equipment.

See the operation manual of the connected equipment for

setting up the equipment.

Air/Cable (Antenna setting)

Make sure what kind of connection is made with your TV when selecting "Air" or "Cable".

7 Press / to select "Air" or "Cable". Press ENTER to enter the setting.

ENG 2-4

Watching TV

Initial Installation (Continue)

CH Search (Channel search)

Channel auto search makes the TV look for all channels viewable in the set area.

8 When "Air" is selected in Antenna setting: Press / to select "Start", and then press ENTER.

When "Cable" is selected in Antenna setting:

Press / to select "Analog & Digital Search Start" to search both analog and digital broadcasts, or to select "Analog Search Start" to search only analog broadcasts, and then press ENTER.

The Channel search will start automatically. To exit the Channel search screen, select "Cancel", and

then press ENTER.

The Channel search results may include scrambled channels or channels that are not viewable in the set area. Press / to select "Yes", and then press ENTER to remove scrambled channels.

Smart TV

When you connect to the Internet on the TV, select the desired connection method and follow the instructions shown on the display.

Wireless LAN connection is possible only when the WPS

(push button) method is used. If any other method is used, make settings by Smart TV > Internet Setup > Internet Connection. (See pages 9-2 to 9-4.)

9 Press / to select "Yes", and then press ENTER.

10 Press / to select "Wired" or "Wireless", and then press

ENTER.

ENG 2-5

Watching TV

Initial Installation (Continue)

Connection using an ETHERNET cable:

Select "Wired" and press ENTER. Confirm that the TV is properly connected with the router,

and then press "Next". Follow the instructions on the display to perform the connection test.

Wireless LAN connection by the WPS method:

Select "Wireless" and press ENTER. Follow the instructions on the display, and finalize the

connection after testing its viability.

NOTE

After you finish configuring the network settings, configure

the "TV Name Setting", "Remote Control App",and "Samba TV" settings.

(See page 4-26, 8-3.)

The product that you have purchased may not be equipped

with "Samba TV". In this case, this feature will be added by way of a planned future software version update.

When you change the network settings, refer to Smart TV

> Internet Setup > Internet Connection.

(See pages 9-2 to 9-4.)

Completed

11 The settings confirmation screen is displayed. Confirm

the information displayed on the screen, and then press

ENTER.

Examples of the settings confirmation screen When one or more channel is received after "Antenna &

Cable" was selected in step 6 and a search was carried out.

When no channel is received after "Antenna & Cable" was selected in step 6 and a search was carried out.

ENG 2-6

Watching TV

Initial Installation (Continue)

NOTE

If no channel is found, confirm the type of connection made

with your TV and try "Easy Setup" again.

(See page 4-13.)

To see the list of channels found during Channel search,

press INPUT, and then press .

When "Set-top box" was selected in step 6.

This may not display correctly depending on the

connected equipment.

This is not displayed correctly when the connected

equipment is off.

To watch TV using a set-top box, press INPUT after

completing the initial settings, and select the input to which the set-top box is connected.

NOTE

For changing the settings of the Initial Installation, perform

"Easy Setup" on the Setup menu on

page 4-13.

Click "OK" to display the confirmation screen for input

source switching.

Show the input list: You can check the current connection

status of external equipment. Confirm which input terminal is connected to the set-top box.

OK: Clicking "OK" will complete the Easy Setup procedure.

ENG 2-7

Direct Button Operation

Changing Channels

You can change channels in several ways.

Method 1 Using CH / on the remote control unit or on the TV. Method 2 Using remote control buttons 0-9, • (DOT).

Examples: To select a 1 or 2-digit channel number (e. g., Channel

5):

Press 5 ENTER To select a 3-digit channel number (e. g., Channel 115): Press 1 1 5 ENTER To select a 4-digit channel number (e. g., Channel 22.1): Press 2 2 • (DOT) 1 ENTER

Method 3

Selecting the program from the Channel list.

1 Press INPUT on the remote control unit.

The INPUT list displays.

2 Press / to select "AIR" or "CABLE".

The Channel list displays.

3 Press / to select the desired channel, and then press

ENTER.

NOTE

When selecting a 1-digit channel number, it is not

necessary to press 0 before the number.

When you enter 0-9 only, channel selection will be made if

there is no operation within a few seconds. If you push "0" by itself, nothing will happen. Complete the above steps within a few seconds. When you enter 0-9 and • (DOT), channel selection will be

made if there is no operation within a few seconds.

ENG 3-1

Direct Button Operation

Changing Volume

You can change the volume by pressing VOL+/- on the TV or on the remote control unit.

To increase the volume, press VOL +. To decrease the volume, press VOL -.

Audio status

Output device

Speaker Variable sound Mute

When "Output Select" is set to "Variable", the indicator on

the screen changes as shown below.

NOTE

See page 4-20 for details on the Output Select function.

Output Select

Fixed Variable

ENG 3-2

Direct Button Operation

MUTE

Mutes the current sound output. Press MUTE.

" " will be displayed on the screen for 30 minutes, and

the sound is silenced.

NOTE

Within 30 minutes of pressing MUTE, mute can be

canceled by pressing VOL+/- or MUTE.

Mute will be canceled after 30 minutes have passed.

However, the TV will not suddenly output a loud sound as the volume level is set to 0 automatically.

ENG 3-3

Direct Button Operation

FREEZE

Allows you to capture and freeze a moving image that you are watching. Press FREEZE.

A moving image is captured. Press FREEZE again to cancel the function.

NOTE

When this function is not available, "No displaying still

image available." will display. The still image automatically goes out after 30 minutes. If you are using the freeze function and a broadcast

activates the V-CHIP BLOCK, the freeze function will be

canceled and a V-CHIP BLOCK message will appear. You can have the same settings by choosing "Freeze" on

the menu items.

(See page 4-28.)

ENG 3-4

Direct Button Operation

FLASHBACK

Press FLASHBACK to switch to the previously tuned channel or previous input mode.

Press FLASHBACK again to switch back to the currently

tuned channel.

NOTE

FLASHBACK will not work if no channel has been

changed after the TV is turned on.

ENG 3-5

Direct Button Operation

SmartCentral

Allows you to directly activate various types of applications.

1 Press SmartCentral to display the application window.

Press SmartCentral again to display a list of

applications by category.

2 Press / (or / ) to select the desired application, and

then press ENTER.

If you changed the display to the list of applications in

step 1, select a category and then an application.

See pages 9-12 to 9-13 for details.

If " " is displayed after you switch to USB mode,

check the USB connection.

If " " or " " is displayed after you switch to

Home Network mode or after you connect to the Internet, check your TV’s network settings and connection.

NOTE

See page 6-2 (6-19 for UD1U model), 9-7 to 9-12 for

details of viewable applications. You can display the application window by choosing "App

Dock" on the menu items.

(See page 4-28.)

When this function is not available, "Can not operate this

function now" will display. On the UD1U model, you cannot operate the "Dock",

"SmartCentral" function during 4K60P signal input.

Operate this function during the input 　of other types of

signals(such as Full HD).

ENG 3-6

Direct Button Operation

NETFLIX

Displays the Netflix screen.

Press NETFLIX.

NOTE

If you press the NETFLIX button when the TV is turned off, the TV turns on and the NETFLIX screen is displayed.

To enjoy Netflix, you need to make:

—a broadband Internet connection

(See page 9-1.)

—settings of Internet Setup

(See pages 9-2 to 9-4.)

—adjustments for Netflix

(See page 9-13.)

ENG 3-7

Direct Button Operation

AUDIO

MTS/SAP stereo mode

The TV has a feature that allows reception of sound other than the main audio for the program. This feature is called Multi-channel Television Sound (MTS). The TV with MTS can receive mono sound, stereo sound and Secondary Audio Programs (SAP). The SAP feature allows a TV station to broadcast other information, which could be audio in another language or something completely different like weather information.

You can enjoy Hi-Fi stereo sound or SAP broadcasts where available.

Stereo broadcasts: View programs like live sporting

events, shows and concerts in dynamic stereo sound. SAP broadcasts: Receive TV broadcasts in either MAIN

or SAP sound.

MAIN sound: The normal program soundtrack (either in

mono or stereo).

SAP sound: Listen to a second language, supplementary

commentary or other information. (SAP is mono sound.)

If stereo sound is difficult to hear.

Obtain a clearer sound by manually switching to fixed

mono-sound mode.

You can change MTS as shown below to match the television broadcast signal. Press AUDIO to toggle between audio modes.

Examples: when receiving MTS and SAP

STEREO mode:

STEREO + SAP mode: MAIN + SAP mode: MONO mode: MONO

Digital broadcasting audio mode

The types of audio transmitted in a digital broadcast include SURROUND as well as MONO and STEREO. In addition, it is possible for multiple audio tracks to accompany a single video track. Press ENTER to toggle between audio modes.

Example: when receiving Digital broadcasting

NOTE

MTS only operates while in TV mode. You can have the same settings by choosing "Change

Audio" on the menu items.

(See page 4-29.)

ENG 3-8

Direct Button Operation

Sleep Timer

Allows you to set a time when the TV automatically switches to standby. Press SLEEP.

The remaining time displays when the sleep timer has

been set. Each time you press SLEEP, the remaining time switches

as shown below.

When set, the time automatically starts counting down. If you want to adjust the sleep timer, you can press SLEEP

twice then change the time setting. When it is 5 minutes before the time expires, the remaining

time will start to keep appearing every minute.

NOTE

Select "Off" by pressing SLEEP to cancel the sleep timer. The TV will enter standby when the remaining time

reaches 0.

ENG 3-9

Direct Button Operation

AV MODE

AV MODE gives you several viewing options to choose from to best match the surrounding environment of the TV, which can vary due to factors like room brightness, type of program watched or the type of device connected. You can use USER Mode to create customized settings for each TV input. These settings will be automatically saved on each input for convenience. Press AV MODE. Current AV MODE displays.

Press AV MODE again before the mode displayed on the

screen disappears. The mode changes as shown below:

Example:

When using the COMPONENT IN,

VIDEO IN 1 or 2 terminals

UQ17U, TQ15U, SQ17U, SQ15U, SQ10U and EQ10U

models

LE650U, LE657U, C6500U, LE642U and UD1U models

Example:

When using the PC IN or HDMI IN 1 to 4 terminals

UQ17U, TQ15U, SQ17U, SQ15U, SQ10U and EQ10U

models

*"x.v.Color" can only be selected when an x.v.Color signal is input using HDMI IN 1 to 4 terminals.

LE650U, LE657U, C6500U, LE642U and UD1U models

NOTE

*1: Except for LE657U and UD1U

ENG 3-10

Direct Button Operation

AV MODE (Continue)

AUTO: Optimizes the image quality automatically based on

the room brightness and image signal.

STANDARD (ENERGY STAR)*1: For a highly defined

image in a normal lighting.

MOVIE: For a movie. MOVIE THX: Changes the image quality so that it conforms

to the THX display standard. (For the UQ17U and UD1U models.)

VINTAGE MOVIE: Allows you to enjoy old-time films in a

good old-fashioned way, where the images look as if they were projected in real time in those days. (For the UQ17U, TQ15U, SQ17U, SQ15U, SQ10U and EQ10U models)

GAME (Standard/High Motion): Suitable for game playing.

You can configure the settings according to the type of the game. Refer to "Picture Setting" > "Advanced" > "Game Type". ) (For the UQ17U, TQ15U, SQ17U, SQ15U, SQ10U and EQ10U models)

(See page 4-10.)

GAME: Lowers image brightness for easier viewing.

(For the LE650U, LE657U, C6500U, LE642U and UD1U models)

PC: For PC. USER: Allows the user to customize settings as desired.

You can set the mode for each input source.

x.v.Color: Supports the x.v.Color international standard for

wide color space. The x.v.Color signal allows you to experience colors that conventional color signals cannot reproduce. (For the UQ17U, TQ15U, SQ17U, SQ15U, SQ10U and EQ10U models)

DYNAMIC: For a clear-cut image emphasizing high contrast,

useful for sports viewing.

DYNAMIC (Fixed): Changes the image and sound settings

to the factory preset values. No adjustments are allowed.

NOTE

You can select a different AV MODE item for each input

mode. (For example, select STANDARD (ENERGY STAR) *1 for TV input and DYNAMIC for COMPONENT.)

"MOVIE THX" MODE is not available when 4K signal input.

(For the UQ17U models)

When you play games, "GAME" is recommended for AV

MODE.

You cannot set "PC" when the TV is connected to the

Internet.

You cannot set "GAME" or "PC" when the input "Home

Network", "USB" or "SD/SDHC/USB"*2.

You can have the same settings by choosing "AV MODE"

on the menu items.

(See page 4-5.)

*1: Except for LE657U and UD1U *2: For the UD1U model

ENG 3-11

Direct Button Operation

Closed Captions and Digital Closed Captions

Your TV is equipped with an internal Closed Caption decoder. It allows you to view conversations, narration and sound effects as subtitles on your TV. Closed Captions are available on some TV programs and on some VHS home video tapes at the discretion of the program provider. Digital Closed Caption service is a new caption service available only on digital TV programs (also at the discretion of the service provider). It is a more flexible system than the original Closed Caption system, because it allows for a variety of caption sizes and font styles. When the Digital Closed Caption service is in use, it will be indicated by the appearance of a 3-letter abbreviation that also indicates the language of the Digital Closed Captions: ENG (English), SPA (Spanish), FRA (French) or other language codes. Not all programs and VHS videotapes offer closed captions. Please look for the " " symbol to ensure that captions will be shown. In the Closed Caption system, there can be more than one caption service provided. Each is identified by its own number. The "CC1" and "CC2" services display subtitles of TV programs superimposed over the program’s picture. In the Closed Caption system, the "Text1" or "Text2" services display text that is unrelated to the program being viewed (e.g., weather or news). These services are also superimposed over the program currently being viewed.

1 Press CC.

This will present the Closed Caption information display.

2 Press CC while the Closed Caption information is still on

the screen.

Press repeatedly until you select the desired closed

caption service.

Depending on the number of caption services in the signal

being received, you will see information such as 1/2 or 1/4

displayed.

1/2 means "the first of two services".

Example:

If a program has three services (Digital CC(ENG), CC1

and Text1), the closed caption display will toggle in this

sequence:

The CC button keeps a record of the last service selected

in its memory.

If the last closed caption mode (e.g. 1/3 ENG) you

selected is not available for the next program, or on

another channel, the closed caption service that is

available is automatically selected, and this service

appears in parentheses, e.g. "1/3(CC1)".

Closed Caption services that appear in parentheses will

not be stored in the CC button’s memory as your last

selected service. Only services that you have selected

with the CC button are stored.

ENG 3-12

Direct Button Operation

Closed Captions and Digital Closed Captions (Continue)

Examples:

In a case where there are two closed caption services provided (for instance, Digital CC(ENG) and CC1), and Digital CC(ENG) is displayed as your current selection, if Digital CC(ENG) is not broadcast for the next program, the other closed caption service, CC1, will be displayed in parentheses. A closed caption service appears in parentheses because the service you selected is not available and a different service is displayed on your screen. "1/1(CC1)" is displayed instead of "1/2/ENG".

NOTE

When "Power Saving" is set to "Standard" or "Advanced",

the Power Saving leaf icon appears on the channel

information window.

See page 4-27 for details of Power Saving settings.

See page 4-30 for detailed closed caption settings.

When the program contains no closed caption, "--" displays

in the closed caption information.

If the language code, e.g. "ENG", is not found on Digital TV

programs, "--" will be shown.

Four kinds of closed caption service (CC1, CC2, Text1,

Text2) are potentially available, but a broadcast may

contain none or only some of these services at the

discretion of the program provider.

When a web page is displayed, Closed Captions are not

available.

You can have the same settings by choosing "Change CC"

on the menu items.

(See page 4-29.)

ENG 3-13

Direct Button Operation

VIEW MODE

You can select the screen size.

1 Press VIEW MODE.

The View Mode menu displays. The menu lists the View Mode options selectable for the type of video signal currently being received.

2 Press VIEW MODE or / while the View Mode menu is displayed to select a desired item on the menu.

You can sequentially select a View Mode that has its own aspect ratio.

NOTE

You can have the same settings by choosing "View Mode" on the menu items.

(See page 4-28.)

Each time you press VIEW MODE when a browser screen is shown, the display pattern toggles between a website-only screen and

a TV+Web screen.

On the UD1U model, you cannot display the TV+Web screen during 4K60P signal input.

Operate this function during the input of other types of signals (such as Full HD).

You may not be able to change the View Mode while in 3D mode. (For the UQ17U, TQ15U, SQ17U, SQ15U, LE657U and UD1U

models)

For HD programs

Stretch

Dot by Dot (Full Screen) S.Stretch (Smart stretch) Zoom

Suitable for viewing wide-

screen 1.78:1 aspect ratio

program, stretch mode will

still show very thin black

bands at the top and bottom

of the screen.

NOTE

When using Dot by Dot or Full Screen, it is possible to see noise or bars around different outer portions of the screen. Please

change view mode to correct this.

*1: The View Mode is fixed to "Full Screen" when 4k signal is input for models UQ17U, TQ15U, SQ17U and SQ15U series.

"Dot by Dot" when the number

of pixels on the screen and

the resolution of the signal

are the same. "Full Screen"

when the number of pixels

on the screen and the

resolution of the signal are

different. In either case, the

image fully fills the screen.

Suitable for stretching 4:3

programs to fill the screen.

Suitable for viewing wide-

screen 2.35:1 aspect-ratio

programs in full screen.

ENG 3-14

Direct Button Operation

VIEW MODE (Continue)

For 4:3 programs Example: Screen size images

Side Bar S.Stretch (Smart stretch) Zoom Stretch

Suitable for viewing

conventional 4:3 programs in

their normal format.

For USB-Video, SD-Video*1, Home Network Video or Internet applications Example: Screen size images

Input signal Auto Original Stretch

*1: For the UD1U model

Suitable for stretching 4:3

programs to fill the screen.

Keeps the original

aspect ratio in a full

screen display.

Suitable for viewing wide-

screen 2.35:1 anamorphic

DVDs in full screen.

Displays an image by

an original size.

An image fully fills the

This mode is useful for 1.78:1

DVDs. When viewing 1.85:1 DVDs, stretch mode will still

show very thin black bands at

the top and bottom of the

screen.

ENG 3-15

Direct Button Operation

VIEW MODE (Continue)

For PC Example: Screen size images

Input signal Normal Zoom Stretch Dot by Dot

4:3 Keeps the original

Input signal Stretch Dot by Dot

16:9 An image fully fills the

NOTE

Connect the PC before making adjustments. See the Setup Guide. Selectable screen size may vary with input signal type.

aspect ratio in a full

screen display.

screen.

widescreen programs. The top and bottom of

the image is cropped.

Detects the resolution

of the signal and

displays an image with

the same number of

pixels on the screen.

For viewing

An image fully fills the

screen.

Detects the resolution

of the signal and

displays an image with

the same number of

pixels on the screen.

ENG 3-16

On-Screen Display Menu

Introduction

LCFONT embedded

Guide display

This indicates the buttons that can be operated on the

displayed screen. The guide display varies depending on the menu setting screen.

The operations for some selected items may be displayed

in the operational guide bar at the bottom of the screen.

Item displayed in blue

This indicates the item currently selected. Press ENTER to go to the adjustment screen for this item.

Item in brackets

This indicates the current setting for the item.

NOTE

On the UD1U model, the menu screen is displayed in gray

during 4K60P signal input.

ENG 4-1

Item displayed in white

This indicates that the item can be selected.

Item displayed in gray

This indicates that the item cannot be selected.

There are various reasons why the items cannot be

selected, but the main reasons are as follows: — Nothing is connected to the selected input terminal. — The function is not compatible with the current input signal. — When this conflicts with other functions, you must change

the settings for the other functions.

On-Screen Display Menu

Introduction (Continue)

About Menu Items

When AV MODE is set to "AUTO", part of the menu may not

be displayed correctly or the setting range of the menu may be changed.

Some menu items may not be displayed depending on the

selected input source.

NOTE

The screens in the operation manual are for explanation

purposes (some are enlarged, others cropped) and may vary slightly from the actual screens.

The order of explanations for each menu item in the

following pages is not necessarily in accordance with the alignment of the items on the screen.

LCFONT:

This product is embedded with LC Font technology, which

was developed by SHARP Corporation for clearly displaying easy-to-read characters on LCD screens.

ENG 4-2

On-Screen Display Menu

On-Screen Display Menu Operation

Example

1 Press MENU to display the MENU screen. 2 Press / to select the desired menu.

Press / to select a specific adjustment item, and then

press ENTER.

Additional related adjustment items may be displayed.

Press / to select the desired item.

Adjust the item while referring to the guide display. Operations vary depending on the function or item. Refer

to the guide display corresponding to the menu setting screen for button operations.

ENG 4-3

3 Press MENU to exit.

NOTE

Menu options differ in the selected input modes, but the

operating procedures are the same.

On-Screen Display Menu

Menu Operation Buttons

Using the remote control

Use the following buttons on the remote control to operate the menu.

MENU: Press to open or close the menu screen.

/ / / : Press to select a desired item on the screen or

adjust a selected item.

ENTER: Press to go to the next step or complete the setting. RETURN: Press to return to the previous step.

Using the control panel of the TV

You can also operate the menu with the control panel of the TV. Button operations on the control panel correspond to the ones on the remote control as shown below.

MENU: MENU on the remote control. INPUT: ENTER on the remote control. CH / : Cursor / on the remote control. VOL+/-: Cursor / on the remote control.

ENG 4-4

On-Screen Display Menu

Example

Picture Settings

Adjusts the picture to your preference with the following picture settings.

NOTE

For operating the on-screen display menu, see page 4-3.

Selected item button button

Backlight The screen dims The screen

3D Brightness Boost

Contrast For less contrast For more contrast Brightness For less brightness For more brightness Color For less color

Tint Skin tones become

Sharpness For less sharpness For more sharpness

You can select "3D Brightness Boost" while in 3D mode. For resetting all Picture adjustment items to the factory

preset values, press / to select "Reset", press ENTER, press / to select "Yes", and then press ENTER.

For the UD1U model

When the signal input format is 4K with 60fps, the red mark

for Tint is displayed as "R" and the green mark for Tint is displayed as "G".

High/Middle/Low: Select a desired level of 3D Brightness Boost. (For the UQ17U, TQ15U, SQ17U and SQ15U models)

intensity

reddish

brightens

For more color intensity

Skin tones become greenish

AV MODE (Changing Pic.Quality)

The audio and video settings can be changed to suit the program or input content being watched.

NOTE

The selectable items vary depending on the input source

and on the model of your TV.

For details of the selectable items in 3D mode,

see page 5-11. (For the UQ17U, TQ15U, SQ17U, SQ15U,

LE657U and UD1U models)

You can select AV MODE by pressing AV MODE on the

remote control unit.

See page 3-10 for details of AV MODE settings.

ENG 4-5

On-Screen Display Menu

Example

Picture Settings (Continue)

THX Setup (For the UQ17U and UD1U models)

Adjust the picture to room illumination or ambient brightness. This function is available only when AV MODE is set to "MOVIE THX".

Bright room: Select this item for a bright room. Dark room: Select this item for a dark room.

Automatic Light Sensor(Light Sensor)

Automatically adjusts the brightness of the screen.

Off: The brightness is fixed at the value set in "Backlight". On: Automatically adjusts. On:Display: Displays the Light Sensor effect on the screen

while adjusting the brightness of the screen.

NOTE

When set to "On", the Light Sensor senses the surrounding

light and automatically adjusts the backlight brightness. Make sure nothing obstructs the Light Sensor, which could affect its ability to sense surrounding light.

When set to "On:Display", Light Sensor effect displays on

the screen while the Light Sensor adjusts the screen brightness.

ENG 4-6

On-Screen Display Menu

If you want to use these modes, set Resolution Enhanced

Example

Picture Settings (Continue)

Advanced

Resolution (For the UD1U model)

Adjusts the fineness (resolution) of the picture in the range 0 to +10.

NOTE

"Resolution" is not available when you set AV MODE to

"PC", "3D" or "GAME (3D)".

When using any of the HDMI IN 1 to 4 terminals and

inputting a 3840 x 2160 signal, you cannot select "Resolution".

Focus (For the UD1U model)

Adjusts the sharpness (crispness) of the picture in the range 0 to +10.

NOTE

"Focus"" is not available when you set AV MODE to "PC",

"3D" or "GAME (3D)".

When using any of the HDMI IN 1 to 4 terminals and

inputting a 3840 x 2160 signal, you cannot select "Focus".

Resolution Enhanced (for the UQ17U, TQ15U, SQ17U, SQ15U and SQ10U models)

Configures Resolution Enhanced Mode settings.

NOTE

When Resolution Enhanced Mode is set to "Mode 1" or

"Mode 2", the following modes do not work.

1. Motion enhancement (AquoMotion 960 and 240 Hz)

2. Game Type

to "Off".

Resolution Enhanced is not available when:

The A/M960 or 240 Hz mode is selected. Game Type is set to "High Motion". 3D mode is on.

Quad Pixel Plus 2 (for the EQ10U models)

Smoothes diagonal lines by detailed dot control.

Advanced: Produces smoother diagonal lines by jaggy

removal process.

Standard: Produces smooth diagonal lines. Off: No adjustment.

NOTE

When AV MODE is set to "VINTAGE MOVIE" MODE,

"Quad Pixel Plus2" is not available.

Motion Enhancement

Use Motion Enhancement to view fast-action video more clearly.

Selected item Description

AquoMotion960 Turn the LED backlight on or off for

240Hz drive display.

240Hz For obtaining a clearer image. AquoMotion240 Turn the LED backlight on or off for

120Hz drive display.

120Hz High For obtaining a clearer image. 120Hz Low Off Original image.

UD1U model

AquoMotion240/120Hz High/120Hz Low/Off

UQ17U models

AquoMotion960/240Hz/AquoMotion240/ 120Hz High/120Hz Low/Off

TQ15U, SQ17U, SQ15U, SQ10U, EQ10U models

240Hz/AquoMotion240/120Hz High/120Hz Low/Off

LE657U model

AquoMotion240/120Hz High/120Hz Low/Off

LE650U, C6500U and LE642U models

120Hz High/120Hz Low/Off

NOTE

"Motion Enhancement" may cause image noise. If this

occurs, turn the function "Off".

When AV MODE is set to "VINTAGE MOVIE" MODE,

"GAME" or "PC", or PC format is being input, "Motion Enhancement" is not available.

ENG 4-7

On-Screen Display Menu

Example

Picture Settings (Continue)

Clear Picture Processing (for the UQ17U, TQ15U, SQ17U, SQ15U and SQ10U models)

Reduces jaggies and noise and displays a clear picture. Processes noise included in broadcast signals to improve picture quality.

High:Improves picture quality through Clear Picture

Processing at a level above “Standard”.

Middle:Improves picture quality through Clear Picture

Processing.

Off:No adjustment. C.M.S.

(Color Management System) (Except for UD1U)

Color tone is managed using the six-color adjustment setting.

C.M.S.-Hue: This is a standard to adjust the color either

more reddish or more bluish in tone.

C.M.S.-Saturation: Increases or decreases the saturation of

a selected color. C.M.S.-Value: A higher value makes the image brighter. A lower value makes the image darker.

NOTE

For resetting all adjustment items to the factory preset

values, press / to select "Reset", and then press

ENTER.

Color Temp. (Color Temperature)

For a better white balance, use color temperature correction. High: White with bluish tone Mid-High: Middle: Mid-Low:

Low: White with reddish tone

Low (Xenon), Low (Carbon arc): Available only when AV

MODE is set to "VINTAGE MOVIE" MODE or "MOVIE(UD1U only)" MODE. Use one of these items to

make picture color become more reddish. White balance can be adjusted between a maximum of +30 and a minimum of –30 for each color temperature.

R Gain (LO/HI)/G Gain (LO/HI)/B Gain (LO/HI)

Fine tuning the color temperature

To fine tune the color temperature, set "10 Point Setting" to "On". You can adjust the "Position" setting. Adjust the set color temperature from +1 to +10. White balance can be adjusted between a maximum of +30 and a minimum of –30 for each color temperature.

NOTE

When "Position" is set to "10", you can adjust the white

balance between –30 and 0.

For resetting all adjustment items to the factory preset

values, press / to select "Reset", and then press ENTER.

ENG 4-8

On-Screen Display Menu

Example

Picture Settings (Continue)

Active Contrast (Except for UD1U)

Automatically adjusts the image contrast according to the scene.

Advanced: Produces higher contrast image especially in

dark scene.

Standard: Produces high contrast image. Off: No adjustment.

Gamma Adjustment

Adjusts the differences of picture tones between bright parts and dark parts. The adjustment range of the gamma can be set to a maximum of +2 and a minimum of –2 by pressing or .

NOTE

On the UD1U model, you cannot operate the "Gamma

Adjustment" function during 4K60P signal input. Operate this function during the input of other types of signals (such as Full HD).

Film Mode (3:2 pull-down)

This function provides high-quality playback of images originally encoded at 24 frames/second, such as films.

Advanced (High): Provides smoother image motion while

ensuring high-quality playback. (For the UD1U model)

Advanced (Low): Adjusts effect to reduce judder from film

contents. (For the UD1U model)

Advanced: Adjusts effect to reduce judder from film

contents. You can select a desired level of judder reduction from 0 to +10. (Except for UD1U)

Standard: Plays back images with equal display time for

each frame, reproducing movie theater experience.

Off: Normal viewing mode.

NOTE

"Film Mode" does not function depending on input signal

type.

"Film Mode" does not function when you set AV MODE to

"VINTAGE MOVIE" MODE, "GAME" or "PC".

"Standard" does not function depending on input signal

type.

Digital Noise Reduction

Produces a clearer video image.

Auto: Automatically adjusts the level of noise reduction. High/Middle/Low: You can select a desired level for viewing

a clearer video image.

Off: No adjustment.

NOTE

"Digital Noise Reduction" is not available when you set AV

MODE to "PC" or PC format is being input.

When AV MODE is set to "GAME", "AUTO" is not

available.

Color Gamut Range (for the UQ17U, TQ15U, SQ17U, SQ15U, SQ10U and EQ10U models)

You can set the color gamut range.

Standard: Standard color gamut. Expanded: More vivid colors with expanded color gamut.

NOTE

"Color Gamut Range" is only available when AV MODE is

set to "MOVIE" or "MOVIE (3D)".

ENG 4-9

On-Screen Display Menu

Example

Picture Settings (Continue)

Lamp Swing Effect (for the UQ17U, TQ15U, SQ17U, SQ15U, SQ10U and EQ10U models)

Available only when AV MODE is set to "VINTAGE MOVIE" MODE. When this function is enabled, the lamp light looks like it is swinging. You can adjust the effect level between 0 and +3.

Monochrome

For viewing a video in monochrome.

Game Type (for the UQ17U, TQ15U, SQ17U, SQ15U, SQ10U and EQ10U models)

You can adjust picture quality according to the type of the game you are playing.

Standard: Optimizes picture quality for standard video

games.

High Motion: Optimizes picture quality for high motion video

games.

NOTE

"Game Type" is not available depending on the input signal

type.

"Game Type" is only available when AV MODE is set to

"GAME" and "Resolution Enhanced" is set to "OFF".

Black Level

Adjusts on-screen black level to your preferred level.

High: The black level gets brighter. Low: The black level gets darker.

NOTE

"Black Level" is available for input signal from Composite

Video, Component 480i and analog broadcasts (air and cable).

Light Sensor Adjustment

The brightness level range of the Light Sensor's automatic adjustments can be set according to your preferences. The adjustment range of the Light Sensor can be set to a maximum of +16 and a minimum of –16.

Max.: –15 through +16 Min.: –16 through +15

NOTE

The "Light Sensor Adjustment" settings are active only

when "Automatic Light Sensor" is set to "On".

The maximum setting cannot be set to a smaller number

than the minimum setting.

The minimum setting cannot be set to a bigger number

than the maximum setting.

Depending on the brightness of the surrounding light, the

Light Sensor might not operate if the adjustment range is small.

Reset

Returns Picture Settings to their factory preset values. To reset, select "YES" and then press ENTER.

ENG 4-10

On-Screen Display Menu

Example

Audio Settings

You can adjust the sound quality to your preference with the following settings.

NOTE

For operating the on-screen display menu,

see page 4-3.

Selected

item

Treble For weaker treble For stronger treble Bass For weaker bass For stronger bass Balance Decrease audio from

NOTE

The Audio menu is grayed out when "Output Select" is set

to "Variable".

(See page 4-20.)

For resetting Audio adjustment items to the factory preset

values, press / to select "Reset", press ENTER, press

/ to select "Yes", and then press ENTER.

Adaptive Volume

Different sound sources sometimes do not have the same loudness level, such as a program and its commercial brakes, The Automatic Volume Control(Auto Volume) reduces this problem by equalizing.

ON: Reduces the loudness gaps among different sound

source. The result is automatically adjusted according to the sound sources.

OFF: No adjustment.

button button

the right speaker

Decrease audio from the left speaker

Surround (For SQ10U, EQ10U, LE650U, C6500U and LE642U models)

The surround function produces Surround effect from the speakers.

NOTE

The Audio Settings menu is grayed out when "Output

Select" is set to "Variable".

(See page 4-20.)

For some discs, setup may be required on your BD/DVD

player. In this case, please refer to the operation manual of your BD/DVD player.

ENG 4-11

On-Screen Display Menu

Example

Audio Settings (Continue)

3D Surround (for the UQ17U, TQ15U, SQ17U, SQ15U, LE657U and UD1U models)

The surround function produces Surround effect from the speakers.

3D Stadium: Reproduces lifelike experience of excitements

such that live sports or concert performances in a stadium create.

3D Hall: Reproduces concert hall experience with realistic

live surround sound using measured reverberant sound in the concert hall.

3D Movie: Reproduces movie theater experience with

realistic live surround sound using measured reverberant sound in the movie theater.

3D Standard: Creates 3 dimensional surround sound with

detailed control of the signal phase.

Normal: Provides mild surround sound. Off: Outputs the normal sound.

NOTE

The Audio Settings menu is grayed out when "Output

Select" is set to "Variable".

(See page 4-20.)

For some discs, setup may be required on your BD/DVD

player. In this case, please refer to the operation manual of your BD/DVD player.

Harmonics Enhancer Extended

This function improves the sound quality by extending the selected range.

All Range: The low range will be extended and the sounds

in the medium and high ranges, which have been lost due

to the data being compressed, will be restored.

This setting is effective when playing back audio through a

wireless interface such as when using Bluetooth playback.

Low Range: The low range will be extended. Off: No adjustment.

Clear Voice

This function emphasizes speech against background noise for greater clarity.

NOTE

The Audio Settings menu is grayed out when "Output

Select" is set to "Variable".

(See page 4-20.)

Wall Mount Setup

This selects the optimal audio for the program you are currently watching even when the TV is mounted to a wall.

Reset

Returns Audio Settings to their factory preset values. To reset, select "YES" and then press ENTER.

ENG 4-12

On-Screen Display Menu

Example

Setup

NOTE

For operating the on-screen display menu,

see page 4-3.

When you select "Easy Setup", "CH Setup", "Parental

Control" or "Reset", you can enter the 4-digit secret number here.

See page 4-21 for setting a secret number.

Language

You can also select a language from the Setup menu. Select from among 3 languages: English, French and Spanish.

NOTE

To change the language of the manual, select "MENU" >

"Setup" > "Language" to change the language. Then, press MANUAL again.

Easy Setup

You can run Easy Setup again, even after setting up the preset channels.

NOTE

On the UD1U model, you cannot operate the "Easy Setup"

function during 4K60P signal input. Operate this function during the input of other types of signals (such as Full HD).

Language: Select from among 3 languages (English,

French and Spanish).

Location & Time: Make settings for the country, area and

time zone where you use the TV.

Select your country: Select either "United States", "Canada" or "Mexico".

Select your time zone: Select your time zone. The available settings differ depending on the selected country.

Select DST (Daylight Savings Time): Select "Auto", "Manual" or "Off".

TV Location: Select "Home" or "Store" for the location

where you plan to install the TV. This product qualifies for

ENERGY STAR*1 in Home mode default setting.

Home: "Power Saving" is set to "Advanced", and AV MODE is set to "STANDARD (ENERGY STAR)*1".

Store: "Power Saving" is set to "Off" and AV MODE is set to "DYNAMIC (Fixed)". Picture Reset and Feature Demo can be set.

Picture Reset: AV MODE will be set to "DYNAMIC (Fixed)" regardless of whether Picture Reset is "On" or "Off". If you select "On", AV MODE will be reset to "DYNAMIC (Fixed)" if there is no operation for 30 minutes. When "Off" is selected, AV MODE will be set to "DYNAMIC (Fixed)".

*1: Except for LE657U and UD1U

ENG 4-13

On-Screen Display Menu

Example

Setup (Continue)

Feature Demo: When "On" is selected, after all the settings

are completed, the Feature Demo screen is displayed if there is no operation for several minutes.

ENERGY STAR qualification is based on AV MODE

"STANDARD (ENERGY STAR)*1".

Antenna & Cable/STB: Select the type of connection you

will use to watch TV.

Air/Cable: Make sure what kind of connection is made with

your TV when selecting "Air" or "Cable".

CH Search: Channel auto search makes the TV look for all

channels viewable in the set area.

If "Cable" is selected for Antenna setting, scrambled

channels are removed after the Channel search has been completed.

Smart TV: When you connect to the Internet on the TV,

confirm the connection method and make adjustments.

Wireless LAN connection is possible only when the

WPS (push button) method is used. If any other method is used, make settings by Smart TV > Internet Setup > Internet Connection.

(See pages 9-2 to 9-4.)

Completed: The settings confirmation screen is displayed.

Confirm the information displayed on the screen.

NOTE

*1: Except for LE657U and UD1U See Initial Installation on

pages 2-2 to 2-7 for setting each item.

If no channel is found, confirm the type of connection made

with your TV and try "Easy Setup" again.

If you select "Analog Search Start" and initiate the channel

search, the CH Memory for Cable Digital will be deleted.

TV Channel Setup

CH Setup

If Initial Installation does not memorize all the channels in your region, follow the instructions below to manually memorize the channels.

Air/Cable: Make sure what kind of connection is made with

your TV when selecting "Air" or "Cable".

CH Search: Channel auto search makes the TV look for all

channels viewable in the set area.

CH Memory: You can select the channels to skip in each

ANALOG (Air), ANALOG (Cable), DIGITAL (Air) and

DIGITAL (Cable).

On: Skips channels. (Channel selection disabled using CH

/ .)

Off: Does not skip channels. (Channel selection enabled using CH / .)

Remove Scrambled CH: This function makes the TV look

for and then delete digital cable channels that are

scrambled and so unavailable in the set area. The

process may take more than 20 minutes.

Yes: Starts to remove scrambled channels. No: This function does not work.

NOTE

See Initial Installation on

pages 2-2 to 2-7 for setting each item.

If no channel is found, confirm the type of connection made

with your TV and try channel search again.

If you select "Analog Search Start" and initiate the channel

search, the CH Memory for Cable Digital will be deleted.

ENG 4-14

On-Screen Display Menu

Example

Setup (Continue)

Favorite CH (Favorite Channel Setting)

This function allows you to program 4 favorite channels, in 4 different categories. By setting the favorite channels in advance, you can select your favorite channels easily.

To register your favorite channel:

Select "Register" and then press ENTER. Press / / / to

select the position in the category, and then press ENTER to register.

To delete your favorite channel:

Select "1 Data Clear" and then press ENTER. Press / / /

to select the channel you want to delete, and then press ENTER. Select "Yes" and then press ENTER.

To delete all the favorite channels, select "All Data Clear".

NOTE

Before setting the channel, select the channel you want to

You can display the "Favorite CH" screen by pressing

FAVORITE CH on the remote control.

Antenna Setup-DIGITAL

In order to receive digital air broadcasts, you need a digital broadcast antenna. You can confirm the antenna configuration through the "Antenna Setup-DIGITAL" screen. If necessary, adjust the direction of the antenna to obtain the maximum signal strength.

Signal Strength: The signal strength of DIGITAL channel is

displayed. The signal information is based on the current

channel.

Channel Strength: Input the 2-digit channel number to

check the signal strength of the selected channel. Make

sure the signal is strong enough for each channel.

This function is available for DIGITAL (Air) only.

ENG 4-15

On-Screen Display Menu

Example

Setup (Continue)

Parental Control (Parental Control Setting)

V-Chip

V-CHIP is an electronic filtering device built into your TV. This tool gives parents a great degree of control over broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing while blocking ones judged not suitable. It does so automatically once you activate the V-CHIP feature in your TV. "V-Chip" and "Status" will not be selectable from the menu if you do not first configure your secret number.

The U.S. has two rating systems for viewing content: TV

Parental Guidelines and movie ratings.

The TV Parental Guidelines work in conjunction with the V-

CHIP to help parents screen out inappropriate television shows from their children.

Movie ratings are used for original movies rated by the

Motion Picture Association of America (MPAA) as watched on cable TV and not edited for television. The V-CHIP can also be set to block MPAA-rated movies.

NOTE

The setting automatically enters "Block" for any ratings

below your selection.

If Status is not set to "On", the configuration settings will

not work.

MPAA (Voluntary movie rating system)

Example

Press / to adjust the item to your desired position. " " indicates the item is blocked. Press MENU to exit.

G: General audiences. All ages admitted. PG: Parental guidance suggested. Some material may not be

suitable for children. PG-13: Parents strongly cautioned. Some material may be inappropriate for children under 13. R: Restricted. Under 17 requires accompanying parent or adult guardian (age varies in some jurisdictions).

NC-17: No one 17 and under admitted. X: X is an older rating that is unified with NC-17 but may be

encoded in the data of older movies.

NOTE

Voluntary movie rating system only uses an age-based

rating.

ENG 4-16

On-Screen Display Menu

Example

Setup (Continue)

TV Parental Guidelines

Example

Suggested age

TV-Y: All children. TV-Y7: Directed to older children. TV-G: General audience. TV-PG: Parental Guidance suggested. TV-14: Parents strongly cautioned. TV-MA: Mature audience only. When setting an individual content-based rating item:

1 Press or ENTER to access blocked content items from

the currently selected age-based rating item.

2 Press / to select an individual item, and then press

ENTER to unblock it (" " is removed). Repeat the same

steps for the other items.

3 Press or RETURN to register after all individual content

rating items are set.

Content

FV: Fantasy violence. V: Violence. S: Sexual situation. L: Adult language. D: Sexually suggestive dialog.

Rating

TV-Y TV-Y7

Suggested age

: The content rating can be set, but this rating is not

normally broadcast by TV stations.

: Content rating can be set.

Canadian Rating Systems (Canadian English ratings and Canadian French ratings)

The TV rating systems in Canada are based on the

Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming.

While violence is the most important content element to be

rated, the structure developed takes into consideration other program content like language, nudity, sexuality and mature themes.

When setting the V-CHIP on the Canadian system you can

choose either the Canadian English ratings or the Canadian French ratings.

TV-G TV-PG TV-14 TV-MA

FV V S L D

Content

ENG 4-17

On-Screen Display Menu

Example

Setup (Continue)

Canadian English Ratings

E: Exempt: Includes news, sports, documentaries and other

information programming; talk shows, music videos, and variety programming.

C: Children: Intended for younger children under the age of

8 years. Pays careful attention to themes that could threaten their sense of security and well-being.

C8+: Children over 8 years old: Contains no portrayal of

violence as the preferred, acceptable, or only way to resolve conflict; nor encourage children to imitate dangerous acts which they may see on the screen.

G: General: Considered acceptable for all age groups.

Appropriate viewing for the entire family, contains very little violence, physical, verbal or emotional.

PG: Parental Guidance: Intended for a general audience,

but may not be suitable for younger children (under the age of 8) because it could contain controversial themes or issues.

14+: Over 14 years: Could contain themes where violence is

one of the dominant elements of the storyline, but it must be integral to the development of plot or character. Language usage could be profane and nudity present within the context of the theme.

18+: Adults: Intended for viewers 18 years and older and

might contain depictions of violence, which while related to the development of plot, character or themes, are intended for adult viewing. Could contain graphic language and portrayals of sex and nudity.

Canadian French Ratings

E: Exempt programming. G: General: All ages and children, contains minimal direct

violence, but may be integrated into the plot in a

humorous or unrealistic manner.

8ans+: General but inadvisable for young children: May be

viewed by a wide public audience, but could contain

scenes disturbing to children under 8 who cannot

distinguish between imaginary and real situations.

Recommended for viewing with parent. 13ans+: Over 13 years: Could contain scenes of frequent

violent scenes and therefore recommended for viewing

with parent.

16ans+: Over 16 years: Could contain frequent violent

scenes and intense violence.

18ans+: Over 18 years: Only for adult viewing. Could

contain frequent violent scenes and extreme violence.

How to temporarily release the V-CHIP BLOCK

When the V-CHIP BLOCK is working and censors a broadcast, "V-CHIP HAS BEEN ACTIVATED." displays.

1 Press ENTER while the V-CHIP is working, and then the

secret number setting menu displays.

2 Input the 4-digit secret number by using 0–9. At this time

V-CHIP BLOCK temporarily releases.

ENG 4-18

On-Screen Display Menu

Example

Setup (Continue)

Reactivating the temporarily released V-CHIP BLOCK

You can reactivate the temporarily released V-CHIP BLOCK as shown below.

Select "Status" setting from the Parental Control menu to

reactivate BLOCK.

Select "V-Chip" setting ("MPAA", "TV Guidelines", "Can.

English Ratings" or "Can. French Ratings") from the Parental Control to reactivate BLOCK.

(See pages 4-16 to 4-18.)

Switch off the TV power.

NOTE

Performing any of the three above will activate the V-CHIP

BLOCK.

Status

Used to enable or disable the parental control function. This function will not be selectable from the menu if you do not first configure your secret number.

Quick Start Mode

When this function is activated, you can reduce the TV's startup time or even let the TV in standby mode start displaying images and so on via the connected equipment on the network.

NOTE

Setting "Quick Start Mode" to "On" consumes more power.

Input Settings

HDMI Setup - Auto View

When you view images sent from external equipment in an HDMI connection, this function allows the image size on the TV to automatically switch to an appropriate one.

NOTE

Refer to your external equipment operation manual for the

signal type.

When connecting a DVI-HDMI conversion adapter/cable to

the HDMI IN terminal, the image may not come in clearly.

PC input

You can adjust the position of the image input from a PC the settings with "Setup" > "Advanced" > "PC input".

(See page 8-1.)

Custom Input Label

Lets you set the input terminal displayed when using the INPUT list or channel display. Press / / / to select the new name for the input mode.

Using the software keyboard, you can enter up to

10 characters for text.

(See page 9-5.)

NOTE

You cannot change labels if the input source is TV, Home

Network, USB, Screen Sharing, Bluetooth or SD/SDHC/USB*1.

On the UD1U model, you cannot operate the "Custom

Input Label" function during 4K60P signal input. Operate this function during the input of other types of signals (such as Full HD).

*1: For the UD1U model only

ENG 4-19

On-Screen Display Menu

Example

Setup (Continue)

Input Skip

This setting allows you to skip the TV, HDMI or PC IN Input ("TV", "PC IN", "HDMI 1", "HDMI 2", "HDMI 3" and "HDMI 4") on the Input Selection operation.

NOTE

If you connect external equipment to an HDMI IN terminal

which you have set to be skipped, a notification message appears on the display when a signal is received from the connected external equipment. Press "Yes" to reset the related skipping setting so that the input terminal becomes available.

Advanced

3D Setup

You can make various settings to enhance 3D image viewing.

(See page 5-11, 5-12.)

Audio Setup

You can output digital audio to an AV amplifier or similar device whose DIGITAL AUDIO INPUT terminal is connected to the DIGITAL AUDIO OUT terminal on the TV. Please select an audio output format compatible with the audio format of the program you are watching and the equipment connected.

PCM: For connecting to equipment that does not support

Dolby Digital and DTS. The same audio (main, sub, or main/sub) as the audio of the program being viewed is output.

2-channel audio with a sampling rate of 48 kHz or less is

output as linear PCM audio.

Bitstream: For connecting to an audio system that supports

Dolby Digital and DTS. Audio is output through both the main and sub channels.

NOTE

Analog channel audio and video input audio are output in

PCM mode even when "Bitstream" is selected.

PCM digital input signals are output in PCM mode even

when "Bitstream" is selected.

Audio Select

This function sets the terminal to output the computer audio. The adjustment items vary depending on the input source. Select the input source corresponding to the terminal connected to the PC and then adjust the desired item. To perform the operation, refer to "Setup" > "Advanced" > "Audio Select".

(See page 8-2.)

NOTE

On the UD1U model, you cannot operate the "Audio

Select" function during 4K60P signal input. Operate this function during the input of other types of signals (such as Full HD).

Output Select

Allows you to select what controls the audio output.

Fixed: Sound via speaker is adjusted with VOL+/- on the

remote control unit or on the TV.

Sound via the AUDIO OUT terminal is not adjustable and

outputs at a consistent level.

Variable: Sound via the AUDIO OUT terminal is adjusted

with VOL+/- on the remote control unit or on the TV.

Sound via speaker is muted.

ENG 4-20

On-Screen Display Menu

Example

Setup (Continue)

Color System

Select the video signal system compatible with your equipment from the list below:

Auto/NTSC/PAL-M/PAL-N

NOTE

"Color System" can only be set for the VIDEO IN 1 or 2. If you have already set the Secret No., input the 4-digit

secret number here.

AQUOS LINK Setup

Make the settings to use AQUOS LINK. Set the settings with "Setup" > "Advanced" > "AQUOS LINK Setup".

(See page 7-2.)

Secret No.

Allows you to use a secret number to protect certain settings from being accidentally changed.

IMPORTANT:

Three conditions must be met to enable the V-Chip

(see pages 4-16 to 4-19):

1. Secret No. is registered.

2. V-Chip/V-Chip (DTV Only) settings have been made.

The "V-Chip (DTV Only)" will only be selectable when a

new rating system can be downloaded via digital broadcasting in the U.S.

3. "Status" is set to "On".

Setting Secret No. You can set and change the secret number by using 0-9.

Yes: Changes or sets the Secret No. No: The confirmation screen to clear the Secret No. appears

when the Secret No. has been set. When the Secret No.

has not been set, the previous screen will be displayed.

Delete Secret No.

You can clear your secret number.

Yes: Your secret number is cleared. No: Your secret number is not cleared.

NOTE

As a precautionary measure, make a note of your secret

number and keep it in a familiar place.

If the secret number is cleared, the Status setting

automatically sets to "Off". "V-Chip" and "Status" will not be selectable from the menu.

Reset

If complex adjustments are made and the settings cannot be restored to normal, you can reset the settings to the factory preset values.

If you have already set the Secret No., input the 4-digit

secret number here.

NOTE

The Channel Setup settings will not be changed. The Language settings will not be changed. The Secret number settings will not be changed. The TV Location settings will not be changed. On the UD1U model, you cannot operate the "Reset"

function during 4K60P signal input. Operate this function during the input of other types of signals (such as Full HD).

ENG 4-21

On-Screen Display Menu

Example

Smart TV

Dashboard

You can display a list of the main Smart TV settings.

Internet Setup

Configures LAN and Internet settings.

Internet Connection

You can connect your TV to the Internet using the setting item "Internet Connection".

(See page 9-2 to 9-4.)

NOTE

On the UD1U model, you cannot operate the "Internet

Connection" function during 4K60P signal input. Operate this function during the input of other types of signals (such as Full HD).

Interactive Service

If you do not want other people to connect to the Internet in your absence, you can make settings to keep the TV away from the Internet.

(See page 9-4.)

SmartCentral Settings

Switch to the SmartCentral Settings screen.

NOTE

On the UD1U model, you cannot operate the

"SmartCentral Settings" function during 4K60P signal input. Operate this function during the input of other types of signals (such as Full HD).

AQUOS Remote Control

Set this function when operating the TV from equipment connected by LAN or wireless LAN.

(See page 8-3.)

NOTE

On the UD1U model, you cannot operate the "AQUOS

Remote Control" function during 4K60P signal input. Operate this function during the input of other types of signals (such as Full HD).

ENG 4-22

On-Screen Display Menu

Example

Smart TV (Continue)

Wallpaper

Activating the function will display still images when the TV is in standby mode.

Wallpaper Mode

Configures Wallpaper Mode settings.

Off:Nothing will be displayed. Picture:Still images will be displayed when the TV is in

standby mode.

Clock: The clock will be displayed when the TV is in

standby mode. Configure the clock settings. (For the UQ17U, TQ15U, SQ17U, SQ15U, SQ10U, EQ10U and UD1U models)

(See page 4-24.)

NOTE

The clock mode can only be used when a network

connection has been established. Finish configuring the network settings.

After you set the time once, the clock will continue to

operate even if you disconnect from the network. However, you cannot switch the daylight saving time setting when disconnected from the network.

Data Source

For the wallpaper, you can select either the still images preinstalled in the TV or your favorite still images stored in the USB memory device or SD memory card *1.

Pre-Installed: The images pre-installed in the TV will be

displayed in a slideshow.

USB or SD/SDHC/USB*1: Your favorite images stored for

the wallpaper will appear. If only a single still image is stored in the USB memory device or SD memory card *1, that image will be displayed as the wallpaper. When there are multiple still images in the memory, all the images will be displayed in a slideshow.

NOTE

Images are displayed in 3-minute intervals as a slideshow. When the TV is in Wallpaper mode, you can turn off the TV

by pressing and holding POWER on the TV for 5 seconds.

- Just before the TV turns off, the last image shown when the TV was turned off appears briefly.

- Your settings may not be saved in some cases.

When you display images by using the USB memory

device or SD memory card *1:

Create a folder named "WP" in the root directory of the

USB memory device or SD memory card *1 (the first directory when the USB memory device or SD memory card *1 is opened), and store into the folder the still images you want to display for the wallpaper.

You must insert the USB memory device or SD memory

card *1 to the TV before turning off the TV.

If there are images on the USB memory device or SD

memory card *1 but they do not appear on the screen, switch to USB mode or SD mode and check whether the image files on the USB memory device or SD memory card *1 are shown correctly.

Timer Setting

You can set the length of time the TV will remain in the Wallpaper Mode.

3 hours/6 hours/12 hours/24 hours

NOTE

No buttons except for POWER work even while the still

images are being displayed.

If the ready-for-use USB memory device or SD memory

card *1 is not inserted, the still images pre-installed in the TV will be displayed in a slideshow even when "Data Source" is set to "USB" or "SD/SDHC/USB"*1.

Because the USB memory device or SD memory card *1

cannot be detected immediately after the TV is turned on from standby mode, the wallpaper pre-installed in the TV may be displayed even when "Data Source" is set to "USB" or "SD/SDHC/USB"*1.

The still images will be displayed until the set time has

elapsed.

*1: For the UD1U only.

ENG 4-23

On-Screen Display Menu

Example

Smart TV (Continue)

Clock

Configures clock settings. Set the type of clock to use in wallpaper mode.

Spring/Summer/Fall/Winter:A clock that represents the

corresponding season will be displayed.

Random:A randomly selected clock from among the four

types will be displayed.

Bluetooth (For the UQ17U, TQ15U, SQ17U, SQ15U, SQ10U, LE657U and UD1U models)

Set this function when using the bluetooth devices with your TV.

See page 9-11,10-1 for how to use the devices.

NOTE

When you use the Bluetooth device with your TV for the

first time, you must make pairing between the device and the TV. Once the pairing is correctly carried out, the Bluetooth device will be registered on the TV.

On the UD1U model, you cannot operate the "Bluetooth"

menu item during 4K60P signal input. Operate this menu item during the input of other types of signals (such as Full HD).

Keyboard Setting/Mouse Setting/Other devices Setting

You can add, delete or select Bluetooth devices in the registration. Other devices Setting can only be used with the UQ17U, TQ15U, SQ17U, SQ15U, SQ10U and UD1U.

Addition of a Bluetooth Device

Before making the settings, press the Connect button on the Bluetooth device you want to connect.

1 Press / to select "Search", and then press ENTER. 2 Model names of the detected devices will be displayed.

Select the device with the message "New" attached, and then press ENTER.

When a keyboard is being paired with the TV, a PIN

code will be displayed. Enter the PIN code using the keyboard, and then press "Enter" key on the keyboard.

When you perform pairing operation on a mouse, select

"Yes", and then press ENTER.

3 After the message indicating the pairing is complete has

been displayed, click "OK".

ENG 4-24

On-Screen Display Menu

Example

Smart TV (Continue)

Deletion of a Bluetooth Device

1 Press / to select the device to delete, and then press

ENTER.

2 Press / to select "Delete", and then press ENTER.

Selection of a Bluetooth Device

1 Press / to select the device to use, and then press

ENTER.

2 Press / to select "Select", and then press ENTER.

NOTE

See also the instruction manual supplied with the Bluetooth

device.

You can register up to 6 devices to the TV, but only one

keyboard and mouse can be used at a time.

If a device for which "Selected" is displayed does not

operate properly, try searching and selecting the device again.

The keyboard or mouse may not operate properly

depending on the application being used.

The Bluetooth device may not operate properly depending

on the device being used.

Other Devices Setting

Though up to six devices (smartphones) can be registered,

only one can be used at a time.

Repairing is required whenever you change the device

being used.

To have TV power turn on automatically when a playback

signal is received from a paired device while TV power is off, set “Quick Start Mode” to “ON”.

Miracast Screen Sharing (For the UQ17U, TQ15U, SQ17U, SQ15U, SQ10U, EQ10U and UD1U models)

NOTE

On the UD1U model, you cannot operate the "Miracast

Screen Sharing" function during 4K60P signal input. Operate this function during the input of other types of signals (such as Full HD).

Connection Mode Setting

Configures Connection Mode settings.

PUSH Button Mode:The push button method will be used

to establish connections.

PIN Code Mode:the PIN code method will be used to

establish connections.

Wireless Channel Setting

Set preferred wireless channel for Miracast Connection

NOTE

Depending on the connected device, different channels

may be assigned.

You can use the Wireless Channel setting to specify the

preferred channel. Select "Auto" to select the optimum channel for the usage conditions.

ENG 4-25

On-Screen Display Menu

Example

Smart TV (Continue)

Home Network

Make the settings for remote playback.

(See page 6-13 (6-30 for UD1U model).)

Advanced

SmartCentral Sounds

You can setting the volume of the SmartCentral sounds. High/Medium/Low/Off: Setting the volume of SmartCentral sounds

NOTE

If an external speaker is used, the operation sound will not

be heard.

This setting is only valid in SmartCentral.

TV Name Setting

Set this function when operating the TV from equipment connected by LAN or wireless LAN.

(See page 8-3.)

NOTE

On the UD1U model, you cannot operate the "TV Name

Setting" function during 4K60P signal input. Operate this function during the input of other types of signals (such as Full HD).

Netflix Help

You can deactivate the Netflix function. Refer to "Information" > "Netflix Help" and select "Deactivate".

(See page 9-13.)

NOTE

On the UD1U model, you cannot operate the "Netflix Help"

function during 4K60P signal input. Operate this function during the input of other types of signals (such as Full HD).

VUDU Help

To deactivate the VUDU function, refer to "Information" > "VUDU Help" and select "Yes".

(See page 9-13.)

NOTE

On the UD1U model, you cannot operate the "VUDU Help"

function during 4K60P signal input. Operate this function during the input of other types of signals (such as Full HD).

ENG 4-26

On-Screen Display Menu

Example

System Options

NOTE

For operating the on-screen display menu,

see page 4-3.

Power Control

Power control setting allows you to save energy.

Audio Only

When listening to music from a music program, you can turn the screen off and enjoy audio only.

NOTE

The screen image will return to normal when a button

(except those for audio adjustment, such as VOL, MUTE) is pressed.

Power Saving

This function allows you to set the Power Saving level in order to decrease the power consumption and increase the backlight lifespan.

Standard: Optimizes power reduction based upon video

content. When set to "Standard", " " appears on the screen.

Advanced: Optimizes power reduction based upon video

content and engages Light Sensor. When set to "Advanced",

" " appears on the screen.

Off: This function does not work.

NOTE

"Power Saving" does not function when you set AV MODE

to "AUTO"*1 or "DYNAMIC (Fixed)".

You cannot select a different Power Saving item for each

AV MODE. When "Power Saving" is set, the "Automatic Light Sensor" settings for all AV Modes will automatically change.

- If you set "Automatic Light Sensor" to "On" when "Power Saving" is set to "Standard", then the "Power Saving" setting will change to "Advanced".

- When you change the "Power Saving" setting from "Advanced" to "Off" or to "Standard", "Automatic Light Sensor" will be set to "Off".

- "AUTO"*1 and "DYNAMIC (Fixed)" will remain set to "Off".

When "Power Saving" is set to "Standard" or "Advanced",

the Power Saving leaf icon appears to the left of "Automatic Light Sensor" in the Picture Settings menu screen.

"Power Saving" is not available when the TV is in 3D

mode. (For the UQ17U, TQ15U, SQ17U, SQ15U, LE657U and UD1U models)

*1: Except for LC-70UD1U.

No Signal Off

When this function is enabled, the TV automatically shuts down if no signal is received for more than 15 minutes.

NOTE

When it is 5 minutes before the power shuts down, the

remaining time will start to keep appearing every minute.

When a TV program finishes, this function may not

operate.

No Operation Off

When you enable this function, the TV automatically shuts down if no operation is performed for more than 3 hours.

NOTE

When it is 5 minutes before the power shuts down, the

remaining time will start to keep appearing every minute.

ENG 4-27

On-Screen Display Menu

Example

System Options (Continue)

Shortcuts

These functions are useful for adjusting the audio and video settings. The Shortcuts functions can be operated with the remote control unit.

SmartCentral Home

Displays the SmartCentral home screen.

NOTE

On the UD1U model, you cannot operate the "SmartCental

Home" function during 4K60P signal input. Operate this function during the input of other types of signals (such as Full HD).

App Dock

The application window can be displayed by selecting "App Dock" on the MENU screen.

NOTE

You can display the application window by pressing

SmartCentral on the remote control unit.

(See page 3-6.)

On the UD1U model, you cannot operate the "App Dock"

function during 4K60P signal input. Operate this function during the input of other types of signals (such as Full HD).

USB Operation Panel*1

Displays the USB Operation Panel.

*1: Operation Panel (For the UD1U)

Home Network Operation Panel

Displays the Home Network Panel.

View Mode

This function changes the screen size. Select "Shortcuts" on the menu to display the View Mode menu screen. The View Mode menu varies depending on the input source.

NOTE

You can select View Mode by pressing VIEW MODE on

the remote control unit.

— See pages 3-14 and 3-15 for adjusting the video being

input from a TV, other audiovisual equipment, USB-Video, SD-Video*1, Home Network Video or Internet applications.

— See page 3-16 for adjusting the video being input from a

PC.

*1: For the UD1U only.

Freeze

Allows you to capture and freeze a moving image that you are watching.

NOTE

You can select Freeze by pressing FREEZE on the remote

control unit.

See page 3-4 for details of Freeze function.

ENG 4-28

On-Screen Display Menu

Example

System Options (Continue)

Change Audio

Allows you to change the audio when multiple audio is available for the program you are watching.

NOTE

You can change Audio by pressing AUDIO on the remote

control unit.

See page 3-8 for details of Audio function.

Change CC

Allows you to change the Closed Caption display. Select "Change CC" on the menu to display the Closed Caption information.

The information displayed varies depending on the

program you are watching.

NOTE

You can change Closed Caption by pressing CC on the

remote control unit.

See pages 3-12 to 3-13 for details of Closed Caption

function.

Advanced

Menu Design

Configures Letter and Caption screen display settings.

Channel Changing Effect

You can select whether to use transition effects when changing channels.

NOTE

In some cases, "Channel Changing Effect" does not work.

Program Title Display

Select the CH display when changing channels for digital broadcasting.

Position

For adjusting a picture's horizontal and vertical position.

H-Pos.: Centers the image by moving it to the left or right. V-Pos.: Centers the image by moving it up or down.

NOTE

For resetting adjustments to the factory preset values,

press / to select "Reset", and then press ENTER.

When connecting a PC to the HDMI IN terminal, the image

position will be automatically adjusted. It cannot be manually adjusted.

The screen position variable ranges depend on the View

Mode or the signal type. The ranges can be seen on the position-setting screen.

Adjustments are stored separately according to input

source.

"Position" does not work when USB mode, SD/USB

mode*1, Home Network mode or an Internet application is used.

You may not be able to adjust the position while in 3D

mode. (For the UQ17U, TQ15U, SQ17U, SQ15U, LE657U and UD1U models)

*1: For the UD1U only.

ENG 4-29

On-Screen Display Menu

Example

System Options (Continue)

Caption Setup

This function allows you to adjust the closed caption screen appearance to suit your preference.

Caption Size/Font Style/Foreground Color/Foreground Opacity/Background Color/Background Opacity/Character Edge

NOTE

For resetting adjustments to the factory preset values,

press / to select "Reset", and then press ENTER.

The default value depends on the broadcasting station.

Startup Screen

With this function activated, the SHARP logo will be displayed when you turn on the TV.

NOTE

This function is not available when the TV is set to "Quick

Start Mode".

Demo Mode

You can select the image from several types of demo mode.

NOTE

What kinds of setting item are available depends on the

model of your TV.

This function will be canceled when you press EXIT on the

remote control unit.

"Demo Mode" may not be selected depending on input

signal type or application status.

"Demo Mode" may be automatically canceled depending

on input signal type.

On the UD1U model, you cannot operate the "Demo

Mode" function during 4K60P signal input. Operate this function during the input of other types of signals (such as Full HD).

ENG 4-30

On-Screen Display Menu

Example

System Options (Continue)

Front Indicator Light

When this function is set to "On", the LED on the front of the TV turns on.

For UQ17U, TQ15U, SQ17U, SQ15U and LE657U models

The LED lights white in 2D mode. The LED lights blue in 3D mode.

For UD1U model

The POWER indicator lights blue when TV is turned on. The 3D indicator lights blue in 3D mode. The TIME indicator lights red when the sleep timer is set to

"On".

NOTE

"On" is the factory preset value. If you want to turn off the

LED, set the function to "Off".

Game Play Time

This function will enable the TV to display the elapsed time every 30 minutes, so that you do not become too absorbed in game playing to keep track of time. Switch AV MODE to "GAME" to activate the function.

Operation Lock Out

This function locks the operation buttons on the TV and the remote control.

Off: No adjustment. RC Control Lock: All buttons on the remote control are

locked.

Button Control Lock: All buttons on the TV, except

POWER, are locked.

When "RC Control Lock" or "Button Control Lock" is selected, a confirmation screen appears.

Yes: Locks the operation buttons. No: No adjustment.

NOTE

To unlock the buttons on the remote control by using the

control panel of the TV

(see page 4-4):

Press MENU to display the MENU screen, press VOL+/- to select "System Options", and then press INPUT.

Press CH / to select "Operation Lock Out", and then press INPUT.

Press CH / to select "Off", and then press INPUT. Press MENU to exit.

To unlock the buttons on the TV, press MENU on the

remote control, and then select "Off" in "Operation Lock Out".

On the UD1U model, you cannot operate the "Operation

Lock Out" function during 4K60P signal input. Operate this function during the input of other types of signals (such as Full HD).

ENG 4-31

On-Screen Display Menu

Example

Information

NOTE

For operating the on-screen display menu,

see page 4-3.

Identification

The current version of the TV software is displayed.

Digital Caption Info. (Digital Caption Information)

This function allows viewing of digital closed caption information for the digital broadcast program being viewed.

NOTE

This list is not displayed for analog broadcasts or external

input audio/video.

This information is not included in CC1, CC2, Text1, or

Text2, and is not displayed in a list.

Software Update

This is used to upgrade the system software to enhance the TV functions.

1 Press MENU to display the MENU screen, and then press

/ to select "Information".

2 Press / to select "Software Update", and then press

ENTER.

If you have already set the Secret No., go to step 3.

3 Input the 4-digit secret number by using 0-9. 4 Press / to select "Manual Update" or "Auto Update

Setting", and then press ENTER.

The operations thereafter vary depending on the setting.

Auto Update Setting

When the TV is on, or when an Internet application is being accessed, this function enables the TV to connect to the network and check for updates automatically. When an update is available, a message is displayed. Press / to select "Yes", and then press ENTER to display the download screen.

(See page 4-34.)

NOTE

This function does not work when a broadband connection

or Internet Setup is not available.

A message may also be displayed when an application is

running.The message varies depending on the application.

Manual Update

Select the method for manually updating the software.

USB Update: Updates the software using a USB memory

device containing the update file. (See "Updating the Software with a USB Memory Device".)

Network Update: Downloads the update file via the network

and then updates the software.

(See page 4-34.)

NOTE

You cannot update the software using a SD memory card

containing the update file.

A broadband connection and Internet Setup are required to

update the software using the network.

(See pages 9-2 to 9-4.)

It may take time to access and download the update

depending on the Internet connection and other factors.

On the UD1U model, you cannot operate the "Manual

Update" function during 4K60P signal input. Operate this function during the input of other types of signals (such as Full HD).

Updating the Software with a USB Memory Device

To check for the availability of a software update, visit http://www.sharpusa.com/products/support/. If you have any questions, please call 1-800-BE-SHARP (800-237-4277).

ENG 4-32

On-Screen Display Menu

Example

Information (Continue)

CAUTION

Do not remove the USB memory device or unplug the

AC cord while the software is being updated.

Be sure to properly follow the whole procedure

described below, step by step. Otherwise, for example, the TV cannot read the data in the USB memory device and software updating will fail.

1 Insert the USB memory device with the update file into the

USB 1 or USB 2 terminal on the TV.

When you update the software, use only one USB

terminal. Either USB 1 or USB 2 is usable.

2 Press / on the Manual Update screen to select "USB

Update", and then press ENTER.

3 Press ENTER to start checking the data in the USB

memory device.

4 During the data checking, "Checking" blinks.

The current version of the TV software and the version

of the update file on the USB memory device are displayed.

If the USB memory device is not properly installed or the

correct update file cannot be found on the USB memory device, an error message is displayed. Check the file on the USB memory device, and then reinsert the USB memory device correctly.

ENG 4-33

On-Screen Display Menu

Example

Information (Continue)

5 To update the TV software with the update file, select

"Yes", and then press ENTER.

CAUTION

Do not remove the USB memory device or unplug the

AC cord while the software is being updated.

6 When the software is successfully updated, a screen is

displayed indicating that the update process is completed.

After this screen is displayed, the TV automatically turns off

and then turns on again.

If the update has failed, check the file in the USB

memory device and try Software Update again.

7 After the screen shown below is displayed, press ENTER.

8 Remove the USB memory device.

Updating the Software via the Network

1 Press / on the Manual Update screen to select "Network

Update", and then press ENTER.

The TV connects to the network and checks for updates. To cancel, press ENTER.

2 The current version of the TV and the latest version of

software are displayed. To update the TV software, select "Yes", and then press ENTER.

When a server connection cannot be established or an

update is not available, a message is displayed. If a server connection cannot be established, check the broadband connection and Internet Setup.

3 After the update file is downloaded, the software update

process begins.

CAUTION

Do not unplug the AC cord while the software is being

updated.

4 When the software is successfully updated, a screen is

displayed indicating that the update process is completed. A screen indicating that the update is completed is displayed. 4 seconds later, the TV restarts automatically.

If the software was not updated successfully, check the

broadband connection and Internet Setup, and then try updating the software again.

Software License

Displays software version information.

NOTE

On the UD1U model, you cannot display the software

license information during 4K60P signal input. Display this information during the input of other types of signals (such as Full HD).

Manual

Displays the built-in operation manual on the screen. You can read information about how to use this device.

ENG 4-34

Enjoying 3D Image Viewing (For the UQ17U, TQ15U, SQ17U, SQ15U, LE657U and UD1U models)

You can use special 3D Glasses to watch 3D-supported images on this TV.

Information

You can enjoy 3D movies on this TV by viewing the movie through SHARP 3D Glasses supplied

with the TV or through optional 3D Glasses sold separately.

To produce 3D images, liquid crystal shutters in the 3D Glasses alternately open and close

imperceptibly fast to exactly match alternating left and right video images displayed by the TV.

Not all consumers can experience and enjoy 3DTV. Some people suffer from stereo blindness

which prevents them from perceiving the intended depth of 3D entertainment. Also, some people who watch 3D programming may experience initial feelings of motion sickness as they adjust to the picture. Others may experience headaches, eye fatigue or motion sickness. Some viewers might also experience epileptic seizures. Like a roller coaster, the experience is not for everyone.

CAUTION

The 3D Glasses are precision equipment. Handle them with care. Improper use of the 3D Glasses or failure to follow these instructions can result in eye

strain.

If you experience dizziness, nausea, or other discomfort while viewing 3D images,

immediately discontinue use of the 3D Glasses. Using the 3DTV with incompatible 3D broadcasts or software can make images appear blurry or create overlapping images.

When viewing 3D images continuously, be sure to take a break periodically to prevent eye

strain.

If you are nearsighted or farsighted or have astigmatism or a different level of eyesight

between the left and right eyes, you should take the necessary steps, such as wearing eyeglasses, to correct your eyesight before viewing 3D images. The 3D Glasses can be worn over eyeglasses.

When viewing 3D images, keep the 3D Glasses horizontally level with the TV screen. If you

tilt the 3D Glasses with respect to the TV screen, the images viewed by the left and right eyes may appear significantly different or images may appear overlapping.

View 3D images at the appropriate distance from the TV screen. The recommended

distance is three times the effective height of the TV screen. Examples of recommended distances 90-inch screen: Approx. 11.2 ft (3.4 m) 80-inch screen: Approx. 9.8 ft (3.0 m) 70-inch screen: Approx. 8.5 ft (2.6 m) 60-inch screen: Approx. 7.2 ft (2.2 m) Viewing should not be done closer than the recommended distance.

Be careful of your surroundings when viewing 3D images. When you view 3D images,

objects may appear closer or farther than they are. This may cause you to misjudge the distance and possibly result in injury if you accidentally hit the screen or surrounding

objects. The 3D Glasses are not recommended for people aged less than 6. When children are viewing 3D images, be sure a parent or guardian is present. Monitor

children viewing 3D images, and if they show signs of discomfort, immediately

discontinue use of the 3D Glasses. People with a known history of photosensitivity and people with heart problems or poor

health should not use the 3D Glasses. This can worsen existing health conditions. Do not use the 3D Glasses for other purposes (such as general eyeglasses, sunglasses, or

protective goggles). Do not use the 3D function or 3D Glasses while walking or moving around. This may result

in injuries due to running into objects, tripping, and/or falling. When using the 3D Glasses, take care not to accidentally strike the TV screen or other

people. Viewing 3D images may cause you to misjudge the distance to the TV screen and

accidentally strike the screen, resulting in possible injury. It is recommended that you do not view 3D images if you are sleep deprived or if you have

been drinking alcohol.

ENG 5-1

Enjoying 3D Image Viewing (For the UQ17U, TQ15U, SQ17U, SQ15U, LE657U and UD1U models)

Preparing for the 3D glasses

Supplied accessories (For the UQ17U, SQ17U, LE657U and UD1U models)

Make sure the following accessories are provided with the 3D glasses.

3D glasses x 2 Cleaning cloth x 1

NOTE

The illustrations above are for explanation purposes and

may vary slightly from the actual accessories.

Part Names

1 Power button 2 LED indicator

NOTE

The power turns off automatically in the following cases:

When pairing fails When the 3D glasses are not operated in standby for

15 seconds

1 Power button:

When the power button is pressed for 2 or more seconds

with the power off, pairing with the TV starts.

When the power button is pressed for 2 or more seconds

with the power on, the power turns off.

When paired, the power will turn off if the power button is

pressed for 2 or more seconds.

When the power button is pressed for less than 2 seconds

with the power off, the 3D glasses will turn to standby.

When the 3D glasses are in 3D mode with the power on,

pressing the power button for less than 2 seconds will turn the 3D glasses to 2D mode.

When the 3D glasses are in 2D mode with the power on,

pressing the power button for less than two seconds will turn the 3D glasses to 3D mode.

When paired, the 3D glasses will be non-reactive if the

power button is pressed for less than 2 seconds.

2 LED light

When paired with the TV, the LED light blinks in red and

green.

When pairing is completed successfully, the LED blinks in

green for 3 seconds.

When the power is turned on, the LED lights up in green

for 3 seconds.

When in 3D mode, the LED blinks in green in 3-second

intervals.

When in 2D mode, the LED blinks in red in 3-second

intervals.

When the power is turned off, the LED blinks in green 3

times.

NOTE

When in low voltage mode:

When in 3D mode, the LED blinks in green in 3-

second intervals.

When in 2D mode, the LED blinks in red in 3-second

intervals.

ENG 5-2

Enjoying 3D Image Viewing (For the UQ17U, TQ15U, SQ17U, SQ15U, LE657U and UD1U models)

Using the 3D glasses

Before using the 3D Glasses

Before using the 3D glasses for the first time, remove the insulating sheet attached to them.

Using the 3D glasses Pairing the 3D glasses

To view 3D images, it is necessary to pair the 3D glasses and TV.

To confirm pairing of the 3D glasses and TV, make sure

that 3D images are displayed on the TV screen.

When the power button is pressed for 2 or more seconds

with the power off, pairing with the TV starts. When pairing is completed successfully, the LED blinks in green for 3 seconds.

To switch between 2D and 3D modes, briefly press the

power button.

NOTE

When paired, make sure that the 3D glasses are kept at a

distance of 1.64-6.56 ft (50 cm-2 m) from the TV. If too close, pairing cannot be performed.

ENG 5-3

Enjoying 3D Image Viewing (For the UQ17U, TQ15U, SQ17U, SQ15U, LE657U and UD1U models)

Using the 3D glasses (Continue)

Switching to 3D and 2D Mode

When viewing 3D images, you can press the power button to switch between 2D and 3D modes. This is useful when several people are viewing 3D images on the same TV with some people wanting to watch in 3D and some people wanting to watch in 2D.

Viewing 2D images

When you press and hold for less than 2 seconds while viewing 3D images, the LED light blinks in red and the 3D images switch to 2D images.

Viewing 3D images

When you press and hold for less than 2 seconds while viewing 2D images, the LED light blinks in green and the 2D images switch to 3D images.

Usage Range of the 3D Glasses

The 3D glasses can be used by receiving a signal sent from the TV. The 3D glasses turn off automatically after 15 seconds if no signal is received from the TV.

Operating range

From directly the TV: approx. 17 ft (5 m) (within approx. 30° horizontally and 20° vertically)

Replacing the Battery

The battery has an expected service life of approximately 75 hours.

When replacing the button battery, use only the designated

battery (Maxell branded CR2025 lithium button battery).

1 Use the tip of a ballpoint pen or similar object to press in

on the lock.

2 While pressing in on the lock, place your fingertip in the

groove and pull out the battery holder.

Pull the battery holder all the way out.

3 Replace the battery.

Use the tip of a ballpoint pen or similar object to remove the battery.

Insert a new battery.

Insert the battery with the negative side (-) facing up.

4 Align the battery holder with the battery slot on the 3D

glasses and slide it back into place.

Press it in until it locks.

NOTE

Take care not to reverse the battery poles (+) and (-) when

loading the battery.

Used batteries should be disposed of strictly in accordance

with the applicable local laws and regulations.

ENG 5-4

Enjoying 3D Image Viewing (For the UQ17U, TQ15U, SQ17U, SQ15U, LE657U and UD1U models)

Specifications - 3D glasses (sold separately)

Product 3D Glasses Model number AN-3DG40 Lens type Liquid crystal shutter Power supply DC3V Battery Lithium button battery (CR2025 x 1) Battery life Approx. 100 hours of continuous use Dimension (W x H x D) 171.2 × 46.0 × 162.4 mm Weight Approx. 31.0 g (including the lithium ion polymer rechargeable

Operating temperature 10°C to 40°C (The 3D glasses cannot operate fully at extreme

battery)

high or low temperatures. Please use them within the specified usage temperature range.)

NOTE

Please contact your local authority for the correct method of disposal of this product and/or

packing.

ENG 5-5

Enjoying 3D Image Viewing (For the UQ17U, TQ15U, SQ17U, SQ15U, LE657U and UD1U models)

Troubleshooting - 3D Images

Problem Possible solution

3D images are not displayed. Is “3D auto change” set to “Off”? Press 2D/3D to switch to

Images displayed in 3D mode appear doubled while you are wearing the 3D glasses.

3D mode

(Page 5-11).

If “3D auto change” is set to “Mode1” or “Mode2” but no 3D images are displayed, check the display format of the content being viewed. Some 3D image signals may not be recognized as 3D images automatically. Press 2D/3D to select the appropriate display format for the 3D image

(Page 5-9).

Is the power of the 3D glasses turned on? Press the power button for at least 2 seconds to turn on the 3D glasses. Are the 3D glasses set to 2D mode? Press the power button for an amount of time that is less than 2 seconds to switch the 3D glasses to 3D mode. Is there an obstacle between the 3D glasses and the TV, or is something covering the receiver on the 3D glasses? The 3D glasses operate by receiving a signal from the TV. Do not place anything between the 3D emitter on the TV and the receiver on the 3D glasses.

Is the power of the 3D glasses turned on? Press the power button for at least 2 seconds to turn on the 3D glasses.

Images displayed in 3D mode appear 2D while you are wearing the 3D glasses.

For further details, refer to the operation manual of the 3D glasses.

Are the 3D glasses set to 2D mode? Press the power button while viewing 2D images, the LED light blinks in green and the 2D images switch to 3D images.

ENG 5-6

Enjoying 3D Image Viewing (For the UQ17U, TQ15U, SQ17U, SQ15U, LE657U and UD1U models)

* These functions can also be used by the SQ10U, EQ10U, LE650U, C6500U and LE642U.

Display Methods for 3D and 2D Images

Example

display

Description

Converts normal 2D images into 3D

images.

Creates 3D images from 3D images

displayed side by side. The image is split into a left and right image, and then the images are stretched and displayed sequentially to create a 3D image.

Creates 3D images from 3D images

displayed on the top and bottom. The image is split into a top and bottom image, and then the images are stretched and displayed sequentially to create a 3D image.

Creates 2D images from 3D images

displayed side by side. Only the left image is stretched and displayed. The image does not appear in 3D.

Creates 2D images from 3D images

displayed on the top and bottom. Only the top image is stretched and displayed. The image does not appear in 3D.

3D mode (using the 3D Glasses)

2D mode (without using the 3D Glasses)

Display method

2D 3D

Side by Side

Top and Bottom

Side by Side 2D

Top and Bottom

ENG 5-7

Enjoying 3D Image Viewing (For the UQ17U, TQ15U, SQ17U, SQ15U, LE657U and UD1U models)

Viewing 3D Images

NOTE

The TV screen may temporarily become black when the

TV is trying to detect a 3D image signal and when switching from 3D to 2D mode.

Receiving a 3D Image Signal That Can Be Detected Automatically

The image signal may contain a 3D identification signal. You can enable the TV to automatically detect the 3D image type by selecting "Setup" > "3D Setup" > "3D Auto Change" on the TV.

(See page 5-11.)

1 When "3D Auto Change" is set to "Mode 1" or "Mode

The 3D image type is detected automatically and the

appropriate 3D image is displayed.

When "3D Auto Change" is set to "Off"

The following message is displayed. Press 2D/3D.

2 Turn on the 3D Glasses and place them on your head. 3 You can now view 3D images.

Switching from 3D to 2D Mode 4 Press 2D/3D during the 3D mode.

Select "Yes" and press ENTER to switch to 2D mode.

Take off the 3D Glasses and turn off the power.

Ending 3D Image Viewing 5 Take off the 3D Glasses and turn off the power.

NOTE

If the input signal switches to 2D, 2D images are displayed

automatically.

3D mode is canceled automatically when the setting is

changed, input selection is changed, or the power is turned off.

Press / to select the "Yes", and then press ENTER.

ENG 5-8

Enjoying 3D Image Viewing (For the UQ17U, TQ15U, SQ17U, SQ15U, LE657U and UD1U models)

Viewing 3D Images (Continue)

Receiving a 3D Image Signal That Cannot Be Detected Automatically

1 Press 2D/3D.

A screen appears prompting you to select between 3D

and 2D image viewing.

2 Press / to select "3D" or "2D", and then press ENTER.

To view in 3D mode: Select "3D", and then go to step

To view in 2D mode: Select "2D", and then go to step

3 Press / to select the 3D signal type

("2D 3D", "Side by Side" or "Top and Bottom") and then press ENTER.

If you select the same system as that of the input signal,

3D images are displayed.

4 Turn on the 3D Glasses and place them on your head. 5 You can now view 3D images.

Switching from 3D to 2D Mode 6 Press / to select the 2D signal type ( "Side by Side" or

"Top and Bottom") and then press ENTER.

If you select the same system as that of the input signal,

2D images are displayed.

Take off the 3D Glasses and turn off the power. This function can also be used by the SQ10U, EQ10U, LE650U, C6500U and LE642U.

Ending 3D Image Viewing 7 Take off the 3D Glasses and turn off the power.

Watching 2D Images in 3D

You can convert normal 2D images into 3D images.

1 Press 2D/3D. 2 Press / to select "2D 3D", and then press ENTER. 3 Turn on the 3D Glasses and place them on your head.

NOTE

The TV returns to 2D mode after 1 hour has passed.

ENG 5-9

Enjoying 3D Image Viewing (For the UQ17U, TQ15U, SQ17U, SQ15U, LE657U and UD1U models)

Viewing 3D Images (Continue)

Switching to the Previous Mode

You can switch back to the previous mode by pressing

2D/3D.

1 Press 2D/3D.

A confirmation screen is displayed.

2 Select "Yes" and then press ENTER.

The TV returns to the previous mode. This function can also be used by the SQ10U, EQ10U, LE650U, C6500U and LE642U.

3D Menu

Pressing 2D/3D in 3D mode displays the 3D menu. Press the colored buttons to make the necessary settings.

A: 3D Brightness Boost *1 B: 3D Surround

(See page 4-12.)

The surround mode changes each time you press B.

C: 2D 3D Convert Effect D: 3D Setup

*1: Except for LC-70UD1U.

ENG 5-10

Enjoying 3D Image Viewing (For the UQ17U, TQ15U, SQ17U, SQ15U, LE657U and UD1U models)

Configuring the TV Setting to Enhance 3D Image Viewing

You can adjust the 3D image to the desired image quality and make various settings for 3D image viewing.

Set AV MODE and "3D Brightness Boost" with "Picture

Settings".

Set the 3D viewing settings with "Setup" > "3D Setup".

NOTE

Which items can be selected/adjusted differs depending on

whether the TV is in 2D mode or in 3D mode.

AV MODE

The audio and video settings can be changed to suit the program or input content being watched.

3D: For a highly defined image in a normal lighting. GAME (3D): Lowers image brightness for easier viewing.

For the LE657U model

STANDARD (3D): For a highly defined image in a normal

lighting.

MOVIE (3D): For a movie. GAME (3D): Lowers image brightness for easier viewing.

NOTE

You can select AV MODE by pressing AV MODE on the

remote control unit.

3D Brightness Boost (For the UQ17U, TQ15U, SQ17U and SQ15U models)

You can adjust the backlight of the TV for 3D image viewing.

High/Middle/Low: Select a desired level of 3D Brightness

Boost.

NOTE

When "High" or "Low" is selected, "Automatic Light

Sensor", "Backlight" and "Light Sensor Adjustment" are not available.

3D Setup

You can make various settings to enhance 3D image viewing.

3D Auto Change

This setting can be used to switch to 3D mode automatically when a 3D identification signal is detected. Set the desired mode according to the type of media you are viewing, such as video from a connected device or video from an internet application.

Mode 1: 3D mode is selected automatically when a 3D

signal is detected while viewing video from a VOD service or HDMI-connected equipment.

Mode 2: 3D mode is selected automatically when, in

addition to detecting a 3D signal while viewing video from a VOD service or HDMI-connected equipment, a video pattern with "Side by Side" or "Top and Bottom" format is also detected.

Off: Auto change is not performed.

NOTE

This function does not work when the input source is

Composite, Component, RGB or Analog/Digital tuner.

3D Depth Control

Select the method for adjusting the 3D depth.

Auto: The depth is adjusted automatically. Manual: You can manually adjust the depth using the

function "Depth Change".

NOTE

This function is only available when the input signal is 3D. This function may not be displayed depending on the type

of 3D signal.

ENG 5-11

Enjoying 3D Image Viewing (For the UQ17U, TQ15U, SQ17U, SQ15U, LE657U and UD1U models)

Configuring the TV Setting to Enhance 3D Image Viewing (Continue)

Depth Change

Adjusts the depth manually. "0" is the level where no adjustment is made.

NOTE

This function is only available when "3D Depth Control" is

"Manual".

On the UD1U model, you cannot operate the "Depth

Change" function during 4K60P signal input. Operate this function during the input of other types of signals (such as Full HD).

2D 3D Convert Effect

You can adjust the 3D effect when converting images from 2D mode to 3D mode. Select a desired level of convert effect from +1 to +16.

NOTE

This function is only available when converting 2D images

to 3D images.

When you use this function, image conversion on the TV

will result in some differences in the original images and how they appear.

2D images that have been converted to 3D images may be

viewed only for personal use.

Viewing Time Info

This displays the elapsed time of 3D image viewing.

Yes: Displays the elapsed viewing time on the screen every

hour.

No: Does not display the elapsed viewing time.

3D Test

This displays 3D images for testing the 3D operation. Clicking "Start" on the screen plays back 3D test images.

If you press RETURN during playback, the previous screen

will be displayed.

On the UD1U model, you cannot operate the "3D Test"

function during 4K60P signal input. Operate this function during the input of other types of signals (such as Full HD).

3D Glasses Control

To enable this function, set "TV Location" to "Store".

On: Switch on signals to the 3D glasses. When watching 3D

images, switch this setting to "On".

Off: Switch off signals to the 3D glasses. This will stop the

TV from influencing 3D glasses that may be in that area of the store.

NOTE

Appropriate 3D Glasses are required to view 3D images.

Purchase 3D Glasses for use with Sharp brand 3D LCD TVs.

ENG 5-12

Enjoying 3D Image Viewing (For the UQ17U, TQ15U, SQ17U, SQ15U, LE657U and UD1U models)

Configuring the TV Setting to Enhance 3D Image Viewing (Continue)

3D Glasses lenses

Do not apply pressure to the lenses of the 3D Glasses.

Also, do not drop or bend the 3D Glasses.

Do not scratch the surface of the lenses of the 3D Glasses

with a pointed instrument or other object. Doing so may damage the 3D Glasses and reduce the quality of the 3D image.

Use only the cloth provided with the optional 3D Glasses to

clean the lenses.

Caution during viewing

Do not use devices that emit strong electromagnetic waves

(such as cellular phones or wireless transceivers) near the 3D Glasses. Doing so may cause the 3D Glasses to malfunction.

The 3D Glasses cannot operate fully at extreme high or

low temperatures. Please use them within the specified usage temperature range.

If the 3D Glasses are used in a room with fluorescent

lighting (60 Hz), the light within the room may appear to flicker. In this case, either darken or turn off the fluorescent lights when using the 3D Glasses.

Wear the 3D Glasses correctly. 3D images will not be

correctly visible if the 3D Glasses are worn upside down or back-to-front.

Other displays (such as computer screens, digital clocks,

and calculators) may appear dark and difficult to view while wearing the 3D Glasses. Do not wear the 3D Glasses when watching anything other than 3D images.

If you lie on your side while watching the TV with 3D

Glasses, the picture may look dark or may not be visible.

Be sure to stay within the viewing angle and optimum TV

viewing distance when watching 3D images. Otherwise, you may not be able to enjoy the full 3D effect.

The 3D Glasses may not work properly if there is any other

3D product or electronic devices turned on near the glasses or TV. If this occurs, turn off the other 3D product or electronic devices or keep the devices as far away as possible from the 3D Glasses.

Stop using the 3D Glasses in any of the following

situations: – When images consistently appear doubled while you are wearing the 3D Glasses – When you have difficulty perceiving the 3D effect

If the 3D Glasses are faulty or damaged, stop using them

immediately. Continued use of the 3D Glasses may cause eye fatigue, headaches and illness.

If you have any abnormal skin reaction, stop using the 3D

Glasses. In very rare instances, such reactions may be due to an allergic reaction to the coating or materials used.

If your nose or temples become red or you experience any

pain or itchiness, stop using the 3D Glasses. Pressure caused by long periods of use may lead to such reactions and may result in skin irritation.

Usage range of the 3D Glasses

The 3D Glasses can be used by receiving a signal sent

from the TV. The 3D Glasses turn off automatically after 15 seconds if no signal is received from the TV. Operating range: From directly in front of the 3D emitter on the TV: approx. 17 ft (5 m) (within approx. 30° horizontally and 20° vertically)

For further details, refer to the operation manual of your 3D

Glasses.

ENG 5-13

Enjoying Photo/Music/Video Playback (Except for UD1U)

You can connect the TV to a USB memory device, USB hard drive or Home Network server to enjoy viewing pictures, listening to music, and watching videos.

Insert the USB memory device with recorded photos, music or videos into the USB 1 or USB 2 terminal on the TV.

Connect the TV to the Home Network server using an ETHERNET cable.

Preparation

NOTE

Depending on the USB memory device/USB hard drive/Home Network server, the TV may not be

able to recognize the recorded data.

It may take time to read the recorded data if the USB memory device/USB hard drive/Home

Network server contains many files or folders. Use only alphanumeric characters for naming files. File names over 80 characters (may vary depending on character set) may not be displayed.

Connecting a USB Memory Device/USB Hard Drive

If USB memory devices are inserted into both terminals, the USB 1 terminal has priority.

CAUTION

Do not use a USB extension cable when connecting a USB memory device to the USB

terminal on the TV.

Using a USB extension cable with the USB memory device may prevent the TV from

performing correctly.

Connecting a Home Network Server

You can also connect a Home Network server by using a wireless LAN.

NOTE

Do not disconnect a Home Network server from the TV while transferring files, when a screen is

switching to another or before you exit "Home Network" from the INPUT list.

Do not connect and disconnect a Home Network server from the TV repeatedly.

When connecting a USB hard drive, be sure to use a hard drive with an AC adapter. Do not remove a USB memory device or memory card from the TV while transferring files, using

the slide show function, or switching screens, or before you exit "USB" from the INPUT list. Do not insert and remove a USB memory device/USB hard drive to and from the TV repeatedly. When using a card reader, be sure to insert a USB memory device first.

ENG 6-1

Enjoying Photo/Music/Video Playback (Except for UD1U)

Selecting the Folders to Play Back

To play back data on a USB memory device, insert the USB

memory device on the TV. USB mode is selected automatically. (Go to step 2)

Use the following procedure to switch back to USB mode

after switching from USB mode to another mode.

1 Select "USB" or "Home Network" from INPUT list screen. 2 Press D. 3 Press / (or / ) to select the drive/server where you

want to find your files, and then press ENTER.

For USB mode, select the drive. When in Home Network mode, select the server.

4 Press / to select "Photo", "Music" or "Video", and then

press ENTER.

Example

5 Press / to select the desired folder, and then press

ENTER.

"VIEW MODE" is fixed during the Music mode. During

"Photo mode" or "Video mode", you can select "Auto" or "Original"

During "Photo mode" or "Video mode", photos and

videos that are smaller than the number of pixels on the screen are displayed at their original size. In these cases, switch "VIEW MODE" to "Auto" to have the photo or video fill the screen.

NOTE

The Media screen can be displayed even by using the

application window. To display the application window, press SmartCentral.

(See page 3-6.)

You cannot switch the input mode if a USB memory device

is not connected.

You do not need to select the drive/server in step 3 when

there is only one drive in the connected USB memory device or there is only one Home Network server connected to the TV.

16 is the maximum number of USB drives and 10 is the

maximum number of Home Network servers that can be displayed.

If the TV is turned off and then on again, the number

assigned to the USB drive may change.

The key guide display disappears automatically after a

particular time has elapsed. To display the key guide display again, press DISPLAY.

USB Device Compatibility

USB device USB Memory, USB card reader (Mass

File system FAT/FAT32/NTFS (USB hard drive only) Photo file

format

Music file format

Storage class), USB hard drive

JPEG (.jpg) (DCF2.0 compliant) Multi-Picture Format (.mpo) (CIPA DC007 Compliant) MP Type : Multi view individually image (stereoscopic view)

MP3 (.mp3) Bitrate: 32k, 40k, 48k, 56k, 64k, 80k, 96k, 112k, 128k, 160k, 192k, 224k, 256k, 320kbps Sampling frequency: 32k, 44.1k, 48kHz

ENG 6-2

Enjoying Photo/Music/Video Playback (Except for UD1U)

Selecting the Folders to Play Back (Continue)

Video file format

File

extension

.avi AVI

.mkv MKV

.asf

.wmv

.mp4

.mov

.mpg

.mpeg

Container Video Audio

MP3

Dolby Digital LPCM

ADPCM

DTS MP3

Dolby Digital LPCM

ADPCM

DTS MP3

Dolby Digital LPCM

WMA

MP3

Dolby Digital

Dolby

Digital Plus

AAC

Dolby Digital

MPEG

LPCM

ASF

MP4

(SMP4)

XviD

H.264

MPEG4

Motion Jpeg

XviD

H.264

MPEG4

XviD

MPEG4

VC-1

Windows Media

Video v9

H.264

MPEG4

Motion Jpeg

MPEG2 MPEG1

NOTE

Progressive format jpeg files are not supported. USB 1.1 devices may not be played properly. Operation using USB hubs is not guaranteed. Some video file formats may not be played depending on

the file.

Some images may not be displayed in the appropriate

aspect ratio depending on the file format.

Home Network Server Compatibility

Photo file format JPEG Music file format LPCM, MP3 Video file format MPEG2-PS, MPEG2-TS,

WMV, ASF, MP4, MOV, AVI

NOTE

Progressive format jpeg files are not supported. Some video file formats may not be played depending on

the file or the server.

WMV, ASF, MP4, MOV and AVI are not Home Network

contents.

ENG 6-3

Enjoying Photo/Music/Video Playback (Except for UD1U)

Playing Back Files on a USB Memory Device/Home Network Server

NOTE

The screen images in this section are for the USB mode. It

may be slightly different in the Home Network mode.

Photo Mode

Viewing Thumbnails

Example

Buttons for thumbnail operations

Buttons Description

/ / / Select a desired item.

ENTER When selecting a folder icon:

Enter this directory. When selecting a photo thumbnail:

Enlarge the photo. RETURN Return to the previous process. A (red) USB mode:

Select the images to be displayed. Press

this button to add or remove a

checkmark.

Home Network mode:

Display the Media screen. B (green)* Display the music list screen. You can

select the background music to be played

for the slide show. C (blue) Start the slide show. D (yellow) Display the USB MENU/Home Network

Menu screen.

*This function is available only for the USB mode.

NOTE

When there are invalid photo files, the X mark will be

displayed for the file. (USB mode only.)

The icon "3D" appears on the thumbnails of 3D images.

(USB mode only.)

For the UQ17U, TQ15U, SQ17U, SQ15U and LE657U

models If you do not switch to 3D mode for the 3D images, they will be displayed in 2D.

For the SQ10U, EQ10U, LE650U, C6500U and

LE642U models 3D images are always displayed in 2D mode.

You can see the file name, shooting date, file size and

pixel size of the selected photo in the lower-left corner of the screen (shooting date is only available in the EXIF file format).

ENG 6-4

Enjoying Photo/Music/Video Playback (Except for UD1U)

Playing Back Files on a USB Memory Device/Home Network Server (Continue)

Viewing Individual Photos

The photo selected on the thumbnail selection screen is displayed.

Buttons for individual display operation

Buttons Description

/ Go to the previous/next photo in the

same directory.

RETURN Return to the thumbnail selection

screen.

2D/3D* Switches between 2D and 3D modes. A (red) Rotate the photo by 90 degrees to the

left.

B (green) Rotate the photo by 90 degrees to the

right.

* This function is available for the UQ17U, TQ15U, SQ17U, SQ15U and LE657U models.

NOTE

Rotating photos only applies to the temporarily selected

item and this setting is not saved.

In 3D mode, you cannot rotate the photos. (For the

UQ17U, TQ15U, SQ17U, SQ15U and LE657U models)

The key guide display disappears automatically after a

particular time has elapsed. To display the key guide display again, press DISPLAY.

Slide Show

The photos displayed on the thumbnail selection screen are displayed as a slide show.

Buttons for slide show operation

Buttons Description

RETURN Return to the thumbnail selection

screen.

2D/3D* Switches between 2D and 3D modes. D (yellow) Display the USB MENU/Home

Network Menu screen.

* This function is available for the UQ17U, TQ15U, SQ17U, SQ15U and LE657U models.

NOTE

The selected BGM is played repeatedly. The slide show continues until you press RETURN. For setting the slide show speed, select "Select Slide

Show Interval" on the USB MENU/Home Network Menu screen.

The key guide display disappears automatically after a

particular time has elapsed. To display the key guide display again, press DISPLAY.

ENG 6-5

Enjoying Photo/Music/Video Playback (Except for UD1U)

Playing Back Files on a USB Memory Device/Home Network Server (Continue)

USB Menu

On the menu to be displayed in USB mode, use / to select an item and make settings to your preferences.

Example

3D Display

(for the UQ17U, TQ15U, SQ17U, SQ15U and LE657U models)

You can view photos in 3D.

NOTE

You can select "3D display" from "USB MENU" only when

the thumbnails screen for the photo mode in USB mode is displayed on the screen.

Depending on the file, the photos may not be displayed in

3D.

Select Slide Show Interval

Specify the length of time before the next image appears. Press / to select the desired length of the time, and then press ENTER.

5sec/10sec/30sec/60sec

NOTE

For Home Network mode, follow the same procedure. Depending on the photo files, the length of the slide show

interval may differ from the selected interval time.

Select Slide Show BGM

The music list screen appears when you select "Select Slide Show BGM". You can select the music to be played in the background while the slide show is being displayed.

1 Select the music you want to play from the music list.

For operations on the music list screen, see "Music

Mode".

2 Press RETURN to display the thumbnail selection screen,

and then press C to start the slide show and the background music.

NOTE

All of the music files are selected by default.

Set/Reset All Slide Show Image

Selecting "Set All Slide Show Image" or "Reset All Slide Show Image" will display the thumbnail selection screen. On the screen, set or reset the images to be displayed in the slide show.

Set All Slide Show Image: Checkmarks are added to all the

images.

Reset All Slide Show Image: Removes all the checkmarks

from all the images.

Sort

You can change the way in which files are ordered.Press / to select "new→old", "old→new", or "File name order", and then press ENTER.

Remove USB Media Device

To remove the USB device properly, use / to select "Yes" and then press ENTER.

ENG 6-6

Enjoying Photo/Music/Video Playback (Except for UD1U)

Playing Back Files on a USB Memory Device/Home Network Server (Continue)

Music Mode

Example

Buttons for music mode

Buttons Description

/ / / Select a desired item.

ENTER When selecting a folder icon:

Enter this directory. When selecting a music file: Play music.

RETURN Return to the previous process. A (red) USB mode:

Select the music to be played back. Press this button to add or remove a checkmark.

Home Network mode: Display the Media screen.

B (green) Stop music. C (blue) Play/(Pause)* music. D (yellow)* Display the USB MENU screen.

* This function is available only for the USB mode.

NOTE

When there are invalid music files, the X mark will be

displayed for the file. (USB mode only.)

The displayed play time may differ slightly from the actual

play time depending on the files.

USB Menu

On the menu to be displayed in USB mode, use / to select an item and make settings to your preferences.

Example

* See page 6-6 for details on the Remove USB Media Device function.

Set/Reset All Auto Play

Selecting "Set All Auto Play" or "Reset All Auto Play" will display the music list screen. On the screen, set or reset the music to be played back in the slide show.

Set All Auto Play: Checkmarks are added to all the music

files.

Reset All Auto Play: Removes all the checkmarks from all

the music files.

ENG 6-7

Enjoying Photo/Music/Video Playback (Except for UD1U)

Playing Back Files on a USB Memory Device/Home Network Server (Continue)

Video Mode

Example

Buttons for file selecting operations

Buttons Description

/ / / Select a desired item.

ENTER When selecting a folder icon:

Enter this directory. When selecting a video file: Play the video.

RETURN Return to the previous process. A (red) USB mode:

Select/deselect items (checkmarks are added to the selected items).

Home Network mode: Display the Media screen.

D (yellow)* Display the USB MENU screen.

* This function is available only for the USB mode.

NOTE

The key guide display disappears automatically after a

particular time has elapsed. To display the key guide display again, press DISPLAY.

ENG 6-8

Enjoying Photo/Music/Video Playback (Except for UD1U)

Playing Back Files on a USB Memory Device/Home Network Server (Continue)

Buttons for playing mode

Buttons Description

Go to the beginning of a file by pressing once or to the previous file by pressing twice.

Go to the next file. USB mode:

The fast forward speed changes every time you press . After playing to the end, the TV goes to the next file and starts to play.

Home Network mode: Jump forward in a video. *3

USB mode: The reverse speed changes every time you press . After going back to the beginning, the TV starts to play the same file.

Home Network mode: Jump back in a video. *3

ENTER USB mode:

Pause the video. Home Network mode:

Play/Pause the video. *3

RETURN Go back to the file selection screen.

Buttons Description

2D/3D*1 Switches between 2D and 3D modes. A (red)*2 Jump to the scene where playback

was last stopped.

B (green) Stop a video. C (blue) Display the USB/Home Network

operation panel.

D (yellow)*2 Display the USB MENU screen. 0-9*2 Jump to a point in the video during

playback of a file without chapters. You can jump to a later point by pressing a higher number.*4

*1 This function is available for the UQ17U, TQ15U, SQ17U, SQ15U and LE657U models. *2 These functions are available only for the USB mode. *3 Jump forward/back and play/pause may not be available depending on the files. *4 During playback of a file without chapters, playback points are set automatically. Playback points are set at intervals of a one-tenth of playback time. Example for a file with a playback time of 100 minutes: Pressing 1 jumps 10 minutes forward, and pressing 2 jumps 20 minutes forward. Pressing 0 returns to the start of the file being played back.

ENG 6-9

Enjoying Photo/Music/Video Playback (Except for UD1U)

Playing Back Files on a USB Memory Device/Home Network Server (Continue)

USB Menu

On the menu to be displayed in USB mode, use / to select an item and make settings to your preferences.

Menu for file selecting operations

Example

* See page 6-6 for details on the Remove USB Media Device function.

Set/Reset All Auto Play

Selecting "Set All Auto Play" or "Reset All Auto Play" will display the video list screen. On the screen, set or reset the video to be played back in the slide show.

Set All Auto Play: Checkmarks are added to all the video

files.

Reset All Auto Play: Removes all the checkmarks from all

the video files.

Menu for playing mode

Example

* See page 6-6 for details on the Remove USB Media Device function.

Title (Edition)/Chapter

Selecting "Title (Edition)" or "Chapter" will display a list of titles/chapters contained in the video file. Select the title or chapter you want to play back.

The selected title or chapter is played back. "0-9" is displayed for files without chapters. Playback jumps

to the playback point of the selected number.

NOTE

If there is Edition information, this screen is displayed

when the title is selected.

If there is no title or edition, you cannot select "Title

(Edition)".

"Chapter" cannot be selected when there is no chapter.

Show Video Information

The information of the current file is displayed.

ENG 6-10

Enjoying Photo/Music/Video Playback (Except for UD1U)

Playing Back Files on a USB Memory Device/Home Network Server (Continue)

USB Operation Panel/Home Network Operation Panel

You can use the operation panel for video playback operations. You can call up this operation panel from "System Options" > "Shortcuts".

Example

Buttons for using the USB operation panel

Hold down to go in reverse. Starts playback. Hold down to fast forward. Video without chapters: Press once to

return to the previous playback point.* Press twice to return to the previous file. Video with chapters: Press once to return to the previous chapter. Press twice to return to the previous file.

Sets pauses and still pictures. Video without chapters: Press once to

advance to the next playback point.* Press twice to display the next file. Video with chapters: Press once to advance to the next chapter. Press twice to display the next file.

Audio Change the audio when multiple

audio is available for the video you are watching.

Playback stops. CC Change the Closed Caption display. Title Displays the title (edition). Resume jump Jump to the scene where playback

was last stopped.

* During playback of a file without chapters, playback points are set automatically. Playback points are set at intervals of a one-tenth of playback time. Example for a file with a playback time of 100 minutes: Playback points are set every 10 minutes. Pressing one time after viewing the file for 15 minutes jumps to the 20minute playback point.

ENG 6-11

Enjoying Photo/Music/Video Playback (Except for UD1U)

Playing Back Files on a USB Memory Device/Home Network Server (Continue)

NOTE

Reverse/fast forward continues from one file to another

during continuous playback.

Use "CC" on the operation panel to change the Closed

Caption display. You can also switch the Closed Caption display by using "System Options" > "Shortcuts" > "Change CC" or by pressing CC on the remote control unit.

Use "Audio" on the operation panel to change the audio.

You can also switch the audio by using "System Options" > "Shortcuts" > "Change Audio".

Buttons for using the Home Network operation panel

Starts playback. Go to the beginning of a file by

pressing once or to the previous file by pressing twice.

Sets pauses and still pictures. Go to the next file. Playback stops. Jump back in a video. Jump forward in a video.

ENG 6-12

Enjoying Photo/Music/Video Playback (Except for UD1U)

Playing Back Files from a Portable Device or PC

With the remote playback function, you can use your portable device to play back pictures, video, and music on the Home Network server.

This TV is a DLNA certified Digital Media Renderer (DMR).

To use the remote playback function, your portable device must be a DLNA Certified Digital Media Controller.

A wireless access point is required to use a portable device.

Set Up Home Network

Make the settings for remote playback.

1 Press / to select "Smart TV", and then press ENTER. 2 Press / to select "Internet Setup", and then press

ENTER.

3 Press / to select "Home Network", and then press

ENTER.

4 Press / to select the specific adjustment item, and then

press ENTER to set each item.

Remote Control Play Settings

This setting allows the TV to perform remote playback.

Permitted/Not allowed

Timeout Setup

This sets the time until the TV returns automatically to TV mode after remote playback ends.

10 sec./60 sec./No

NOTE

This function may not work while an Internet application is

being used.

For information on the compatible formats, see "Home

Network Server Compatibility" on

page 6-3.

ENG 6-13

Enjoying Photo/Music/Video Playback (Except for UD1U)

Presetting Remote Control Function

You can operate the connected AV products (AV receiver, cable box, SAT tuner, DTV, VCR, BD, DVD, LD) using the presetting manufacturer function of your remote control unit.

Presetting manufacturer codes

1 Press an appropriate button (STB, DVD•VCR or AUDIO)

to operate the connected equipment.

2 Press an appropriate button (STB, DVD•VCR or AUDIO)

and MANUAL at the same time to enter the code registration mode.

3 Press 0–9 to enter the manufacturer code.

Preset mode is finished once the LED no longer lights

up.

4 After registering the code, the LED will stop blinking then

turn off after one second. (If you perform an incorrect operation, the LED will blink quickly then turn off.)

Manufacturer codes

STB BRAND

ANVISION 04, 05 CABLE STAR 04, 05 DISH NETWORK 39, 40 DIRECTV 41 EAGLE 05 G.INSTRUMENT 02, 03, 10, 11, 17, 20 GERROLD 17 JERROLD 02, 03, 10, 11, 12, 20, 25-34 MAGNAVOX 04, 05, 08, 12, 15, 16, 18, 19,

MOTOROLA 38 OKA SIGMA 07 PANASONIC 14, 21 PHILIPS 04, 05, 08, 13, 15, 16, 18, 19,

PIONEER 07 RANDTEK 04, 05 RCA 14, 36*, 37* S.ATLANTA 01, 09, 24 VIEWSTAR 04, 05, 08, 13, 15, 16, 18, 19,

ZENITH 06, 35

NOTE

Numbers marked with * are SAT codes, all others are STB

codes.

REMOTE CONTROL

CODE NUMBER

22, 23

ENG 6-14

Enjoying Photo/Music/Video Playback (Except for UD1U)

Presetting Remote Control Function

(Continue)

BD/DVD/LD BRAND

DENON 24 JVC 31 KENWOOD 36 MAGNAVOX 26 MARANTZ 26 MITSUBISHI 28 PANASONIC 24, 37 PHILIPS 26, 38 PIONEER 30, 33, 35 PROSCAN 25 RCA 25, 39 SAMSUNG 29, 34 SHARP 23, 32, 41, 42 SONY 27, 40 TOSHIBA 26 YAMAHA 24 ZENITH 26

Depending on the brand, the codes of some BD players

may not be supported.

REMOTE CONTROL

CODE NUMBER

VCR BRAND

AUDIO DYNAMICS 09 BROCKSONIC 13 CANON 04 CRAIG 12 CURTIS MATHIS 04 DBX 09 EMERSON 10, 13, 14 GE 04 INSTANT REOLYA 04 JC PENNEY 04 JVC 09, 16, 17, 22 KENWOOD 09 MAGNAVOX 04, 05, 06 MAGNIN 12 MEMOREX 04 MONTGOMERY WARD 02 NEC 09 PANASONIC 04, 18, 19, 20, 21 PENTAX 05 PHILCO 04, 05 PHILIPS 04, 05, 06 QUASAR 04 REALISTIC 01, 02 SAMSUNG 11, 12

REMOTE CONTROL

CODE NUMBER

ENG 6-15

Enjoying Photo/Music/Video Playback (Except for UD1U)

Presetting Remote Control Function

(Continue)

VCR BRAND

SHARP 01, 02, 03 SONY 07, 08, 15 SYLVANIA 04, 05, 06 TATUNG 09 TEAC 09 TMK 10 YAMAHA 09

REMOTE CONTROL

CODE NUMBER

AUDIO BRAND

SHARP 01 SHARP (SOUND BAR) 02

REMOTE CONTROL

CODE NUMBER

ENG 6-16

Enjoying Photo/Music/Video Playback (Except for UD1U)

Operating the Connected Equipment

To operate the connected equipment, press STB, DVD•VCR or AUDIO to select your device. (STB (cable/satellite set-top box), BD, DVD, VCR or AUDIO.) The remote control unit button will function as follows.

When you operate VCR, DVD or BD, press INPUT to select

the terminal connected to your device.

CABLE and SAT cannot be selected at the same time.

1 POWER (SOURCE)

Turns the connected equipment power on and off.

Starts playback. (VCR, BD, DVD)

Rewinds the tape and allows picture search. (VCR) Hold down to go in reverse. (BD, DVD)

Stops the tape transport. (VCR) Playback stops when pressed. With some Blu-ray

disc/DVD players, pressing the button twice may open the disc tray. (BD, DVD)

Pressing quickly once takes you to the start of the

chapter currently playing. Each time you press it, you move back to the start of the previous chapter. (BD, DVD)

6 0–9, • (DOT)

Press a button (or buttons) that corresponds to the

channel that you wish to watch.(STB)

Rapidly advances the tape and allows picture search.

(VCR)

Hold down to fast forward. (BD, DVD)

Sets pauses and still pictures. (VCR, BD, DVD)

Pressing quickly once takes you to the start of the next

chapter. Each time you press it, you move ahead to the start of the next chapter. (BD, DVD)

10 FLASHBACK

Press to switch between the current channel and the

channel you were watching immediately before. Some manufacturers do not preset FLASHBACK. (STB)

11 CH /

Press CH or CH to tune in to a higher or lower

channel. (STB)

Press to select the channel of the TV tuner on the VCR.

(VCR)

12 MENU

When this button is pressed, the BD/DVD menu will

display. (BD, DVD)

13 / / / , ENTER

/ / / : Press the button to select items on the STB GUIDE screen or STB MENU screen. (STB) Press the button to select items on the BD/DVD menu screen. (BD, DVD)

ENTER: Press to activate the selected function. (STB,

BD, DVD)

ENG 6-17

Enjoying Photo/Music/Video Playback (For the UD1U model)

You can connect the TV to a USB memory device, USB hard drive, SD memory card or Home Network server to enjoy viewing pictures, listening to music, and watching videos.

Insert the USB memory device or SD memory card with recorded photos, music or videos into the USB 1 or USB 2 terminal or SD memory card slot on the TV.

Connect the TV to the Home Network server using an ETHERNET cable.

Preparation

NOTE

Depending on the USB memory device/USB hard drive/SD memory card/Home Network server,

the TV may not be able to recognize the recorded data.

It may take time to read the recorded data if the USB memory device/USB hard drive/SD memory

card/Home Network server contains many files or folders. Use only alphanumeric characters for naming files. File names over 80 characters (may vary depending on character set) may not be displayed.

Connecting a USB Memory Device/USB Hard Drive/SD Memory Card

If USB memory devices are inserted into both terminals, the USB 1 terminal has priority.

CAUTION

Do not use a USB extension cable when connecting a USB memory device to the USB

terminal on the TV.

Using a USB extension cable with the USB memory device may prevent the TV from

performing correctly.

Connecting a Home Network Server

You can also connect a Home Network server by using a wireless LAN.

NOTE

Do not disconnect a Home Network server from the TV while transferring files, when a screen is

switching to another or before you exit "Home Network" from the INPUT list.

Do not connect and disconnect a Home Network server from the TV repeatedly.

When connecting a USB hard drive, be sure to use a hard drive with an AC adapter. Do not remove a USB memory device or SD memory card from the TV while transferring files,

using the slide show function, or switching screens, or before you exit "SD/SDHC/USB" from the INPUT list.

Do not insert and remove a USB memory device/USB hard drive/SD memory card to and from the

TV repeatedly.

When using a card reader, be sure to insert a USB memory device first.

ENG 6-18

Enjoying Photo/Music/Video Playback (For the UD1U model)

Selecting the Folders to Play Back

To play back data on a USB memory device or SD memory

card, insert the USB memory device or SD memory card on the TV. USB mode or SD mode is selected automatically. (Go to step 2)

Use the following procedure to switch back to USB mode or

SD mode after switching from USB mode or SD mode to another mode.

1 Select "SD/SDHC/USB" or "Home Network" from INPUT

list screen.

2 Press D. 3 Press / (or / ) to select the drive/server where you

want to find your files, and then press ENTER.

For USB or SD mode, select the drive. When in Home Network mode, select the server.

4 Press / to select "Photo", "Music" or "Video", and then

press ENTER.

Example

5 Press / to select the desired folder, and then press

ENTER.

"VIEW MODE" is fixed during the Music mode. During

"Photo mode" or "Video mode", you can select "Auto" or "Original"

During "Photo mode" or "Video mode", photos and

videos that are smaller than the number of pixels on the screen are displayed at their original size. In these cases, switch "VIEW MODE" to "Auto" to have the photo or video fill the screen.

NOTE

The Media screen can be displayed even by using the

application window. To display the application window, press SmartCentral.

(See page 3-6.)

You cannot switch the input mode if a USB memory device

or SD memory card is not connected.

You do not need to select the drive/server in step 3 when

there is only one drive in the connected USB memory device or SD memory card or there is only one Home Network server connected to the TV.

16 is the maximum number of USB or SD drives and 10 is

the maximum number of Home Network servers that can be displayed.

If the TV is turned off and then on again, the number

assigned to the USB or SD drive may change.

The key guide display disappears automatically after a

particular time has elapsed. To display the key guide display again, press DISPLAY.

USB Device Compatibility

USB device USB Memory, USB card reader (Mass

File system FAT/FAT32/NTFS (USB hard drive only) Photo file

format

Music file format

SD memory card Comptibility

SD card SD/SDHC memory card File system FAT/FAT32 Photo file

format Music file

format

Storage class), USB hard drive

JPEG (.jpg) (DCF2.0 compliant) Multi-Picture Format (.mpo) (CIPA DC007 Compliant) MP Type : Multi view individually image (stereoscopic view)

MP3 (.mp3) Bitrate: 32k, 40k, 48k, 56k, 64k, 80k, 96k, 112k, 128k, 160k, 192k, 224k, 256k, 320kbps Sampling frequency: 32k, 44.1k, 48kHz

JPEG(.jpg)(DCF2.0 compliant)

MP3 (.mp3) Bitrate: 32k, 40k, 48k, 56k, 64k, 80k, 96k, 112k, 128k, 160k, 192k, 224k, 256k, 320kbps Sampling frequency: 32k, 44.1k, 48kHz

ENG 6-19

Enjoying Photo/Music/Video Playback (For the UD1U model)

Selecting the Folders to Play Back (Continue)

Video file format

File

extension

.avi AVI

.mkv MKV

.asf

.wmv

.mp4

.mov

.mpg

.mpeg

Container Video Audio

MP3

Dolby Digital LPCM

ADPCM

DTS MP3

Dolby Digital LPCM

ADPCM

DTS MP3

Dolby Digital LPCM

WMA

MP3

Dolby Digital

Dolby

Digital Plus

AAC

Dolby Digital

MPEG

LPCM

ASF

MP4

(SMP4)

XviD

H.264

MPEG4

Motion Jpeg

XviD

H.264

MPEG4

XviD

MPEG4

VC-1

Windows Media

Video v9

H.264

MPEG4

Motion Jpeg

MPEG2 MPEG1

NOTE

Progressive format jpeg files are not supported. USB 1.1 devices may not be played properly. Operation using USB hubs is not guaranteed. Some video file formats may not be played depending on

the file.

Some images may not be displayed in the appropriate

aspect ratio depending on the file format.

If you insert any card other than the SD/SDHC (class 6

or higher), it will not work.

Home Network Server Compatibility

Photo file format JPEG Music file format LPCM, MP3 Video file format MPEG2-PS, MPEG2-TS,

WMV, ASF, MP4, MOV, AVI

NOTE

Progressive format jpeg files are not supported. Some video file formats may not be played depending on

the file or the server.

WMV, ASF, MP4, MOV and AVI are not Home Network

contents.

ENG 6-20

Enjoying Photo/Music/Video Playback (For the UD1U model)

Playing Back Files on a USB Memory Device/SD Memory Card/Home Network Server

NOTE

The screen images in this section are for the USB mode. It

may be slightly different in the SD mode or Home network mode.

Photo Mode

Viewing Thumbnails

Example

Buttons for thumbnail operations

Buttons Description

/ / / Select a desired item.

ENTER When selecting a folder icon:

Enter this directory. When selecting a photo thumbnail:

Enlarge the photo. RETURN Return to the previous process. A (red) USB or SD mode:

Select the images to be displayed. Press

this button to add or remove a

checkmark.

Home Network mode:

Display the Media screen. B (green)* Display the music list screen. You can

select the background music to be played

for the slide show. C (blue) Start the slide show. D (yellow) Display the USB MENU/SD MENU/Home

Network Menu screen.

*This function is available only for the USB or SD mode.

NOTE

When there are invalid photo files, the X mark will be

displayed for the file. (USB or SD mode only.)

The icon "3D" appears on the thumbnails of 3D images.

(USB or SD mode only.)

If you do not switch to 3D mode for the 3D images, they

will be displayed in 2D.

You can see the file name, shooting date, file size and

pixel size of the selected photo in the lower-left corner of the screen (shooting date is only available in the EXIF file format).

ENG 6-21

Enjoying Photo/Music/Video Playback (For the UD1U model)

Playing Back Files on a USB Memory Device/SD Memory Card/Home Network Server (Continue)

Viewing Individual Photos

The photo selected on the thumbnail selection screen is displayed.

Buttons for individual display operation

Buttons Description

/ Go to the previous/next photo in the

same directory.

RETURN Return to the thumbnail selection

screen.

2D/3D Switches between 2D and 3D modes. A (red) Rotate the photo by 90 degrees to the

left.

B (green) Rotate the photo by 90 degrees to the

right.

NOTE

Rotating photos only applies to the temporarily selected

item and this setting is not saved. In 3D mode, you cannot rotate the photos. The key guide display disappears automatically after a

particular time has elapsed. To display the key guide

display again, press DISPLAY.

Slide Show

The photos displayed on the thumbnail selection screen are displayed as a slide show.

Buttons for slide show operation

Buttons Description

RETURN Return to the thumbnail selection

screen.

2D/3D Switches between 2D and 3D modes. D (yellow) Display the USB MENU//SD

MENU/Home Network Menu screen.

NOTE

The selected BGM is played repeatedly. The slide show continues until you press RETURN. For setting the slide show speed, select "Select Slide

Show Interval" on the USB MENU/SD MENU/Home Network Menu screen.

The key guide display disappears automatically after a

particular time has elapsed. To display the key guide display again, press DISPLAY.

ENG 6-22

Enjoying Photo/Music/Video Playback (For the UD1U model)

Playing Back Files on a USB Memory Device/SD Memory Card/Home Network Server (Continue)

USB MENU or SD MENU

On the menu to be displayed in USB or SD mode, use / to select an item and make settings to your preferences.

Example

3D Display

You can view photos in 3D.

NOTE

You can select "3D display" from "USB MENU" or "SD

MENU" only when the thumbnails screen for the photo

mode in USB or SD mode is displayed on the screen. Depending on the file, the photos may not be displayed in

3D.

Select Slide Show Interval

Specify the length of time before the next image appears. Press / to select the desired length of the time, and then press ENTER.

5sec/10sec/30sec/60sec

NOTE

For Home Network mode, follow the same procedure. Depending on the photo files, the length of the slide show

interval may differ from the selected interval time.

Select Slide Show BGM

The music list screen appears when you select "Select Slide Show BGM". You can select the music to be played in the background while the slide show is being displayed.

1 Select the music you want to play from the music list.

For operations on the music list screen, see "Music

Mode".

2 Press RETURN to display the thumbnail selection screen,

and then press C to start the slide show and the background music.

NOTE

All of the music files are selected by default.

Set/Reset All Slide Show Image

Selecting "Set All Slide Show Image" or "Reset All Slide Show Image" will display the thumbnail selection screen. On the screen, set or reset the images to be displayed in the slide show.

Set All Slide Show Image: Checkmarks are added to all the

images.

Reset All Slide Show Image: Removes all the checkmarks

from all the images.

Sort

You can change the way in which files are ordered.Press / to select "new→old", "old→new", or "File name order", and then press ENTER.

Remove SD/USB Media Device

To remove the USB device or SD memory card properly, use

/ to select "Yes" and then press ENTER.

ENG 6-23

Enjoying Photo/Music/Video Playback (For the UD1U model)

Playing Back Files on a USB Memory Device/SD Memory Card/Home Network Server (Continue)

Music Mode

Example

Buttons for music mode

Buttons Description

/ / / Select a desired item.

ENTER When selecting a folder icon:

Enter this directory. When selecting a music file: Play music.

RETURN Return to the previous process. A (red) USB or SD mode:

Select the music to be played back. Press this button to add or remove a checkmark.

Home Network mode: Display the Media screen.

B (green) Stop music. C (blue) Play/(Pause)* music. D (yellow)* Display the USB MENU or SD MENU

screen.

* This function is available only for the USB or SD mode.

NOTE

When there are invalid music files, the X mark will be

displayed for the file. (USB or SD mode only.) The displayed play time may differ slightly from the actual

play time depending on the files.

USB Menu or SD Menu

On the menu to be displayed in USB or SD mode, use / to select an item and make settings to your preferences.

Example

* See page 6-23 for details on the Remove SD/USB Media Device function.

Set/Reset All Auto Play

Selecting "Set All Auto Play" or "Reset All Auto Play" will display the music list screen. On the screen, set or reset the music to be played back in the slide show.

Set All Auto Play: Checkmarks are added to all the music

files.

Reset All Auto Play: Removes all the checkmarks from all

the music files.

ENG 6-24

Sharp LE650U, C6500U, LE642Ul UQ17U, TQ16U, SQ17U Operation Manual

Specifications and Main Features

Frequently Asked Questions

User Manual