Quick Start Guide for BD-HP20H
Accessories
Remote control
unit
Two “AAA” size
batteries
How to install the batteries
Press down on
the tab in the
direction of the
arrow to remove
the battery cover.
Connection
AC cord AV cable Operation
Load the two R03 size batteries
(“AAA” size,
UM/SUM-4)
supplied with the
remote control
unit. Make sure
that the battery
poles k and l
are positioned as
indicated.
Slide the battery
cover in the
direction of the
arrow until it
clicks.
Manual
Quick start
guide
TV
To AC IN
terminal
To AC outlet
When connecting this player to a TV,
Sharp recommend using a HDMI cable
or AV cable (Supplied).
Note:
For HDMI output settings, refer to page 15 of the operation manual.
When connecting with a component video cable, refer to page 16 of the operation manual.
HDMI cable
(commercially available)
AV cable(supplied)
Turn on the player and TV
B (POWER)
After you have connected the AC cord to the unit, connect the AC cord
to the mains. Turn on you TV and switch to the appropriate AV input
(Refer to your TV’s operation manual). (This may be labeled HDMI/EXT/
AUX etc.)
Setup menu
The SETUP MENU consists of several menus where you can make various settings concerning language, audio functions,
images, etc.
The following setting is basic process. There are procedures over the key-guide of each menu indicated below.
Preparation:
• Turn on you TV and switch to the appropriate AV input (Refer to your TV’s operation manual).
• If you are playing a BD / DVD, press the STOP button.
Example:
Press SETUP to display
1
the SETUP MENU screen.
Press a/b/c/d/ to
2
select “SETTINGS”, then
press ENTER.
Press a/b to select
3
“AUDIO VIDEO SETTING”,
then press ENTER.
DISPLAYS THE TITLE LIST SETTINGS
ON SCREEN LANGUAGE
MENU [AUDIO VIDEO SETTINGS]
AUDIO VIDEO SETTINGS
SPEAKER SETTINGS
QUICK START
AUTO POWER OFF
AQUOS LINK
PLAYBACK SETTING
FRONT DISPLAY / LED
VERSION
SOFTWARE UPDATE
SYSTEM RESET
Press a/b to select “TV
4
ASPECT RATIO”, then
press ENTER.
5
Press c/d to select the
desired item, then press
ENTER.
6
Press c/d to select the
desired format, then press
ENTER.
MENU [AUDIO VIDEO SETTINGS - TV ASPECT RATIO]
TV ASPECT RATIO
COMPONENT VIDEO OUT
HDMI VIDEO OUT
HDMI AUTO DETECTION
AUDIO OUT
DYNAMIC RANGE CONTROL
MENU [AUDIO VIDEO SETTINGS - TV ASPECT RATIO]
TV ASPECT RATIO
COMPONENT VIDEO OUT
HDMI VIDEO OUT
HDMI AUTO DETECTION
AUDIO OUT
DYNAMIC RANGE CONTROL
16 : 9 4 : 3
WIDE
LETTER BOX PAN SCAN
NORMAL
Loading and playing a BD/DVD
Before loading a disc, check to ensure the media type is
supported by this player. (Refer to the Operation Manual for
more information about supported discs.)
Getting started
Turn on the power of the TV, amplifi er and other equipment
that is connected to this player.
Make sure the TV and audio receiver (commercially
available) are switched to the correct input.
This Player’s region code is B for BD and 2 for DVD. (Discs
marked ALL will play in any player.)
1. Press B to turn on the power.
2. Press OPEN/CLOSE to open the disc tray.
3. Load a disc into the tray with the printed side
facing up.
4. Press OPEN/CLOSE to close the disc tray.
5. Press I PLAY.
6. Press H STOP to stop/pause playback.
Press I PLAY to resume playback.
7. Press H STOP twice to stop playback.
7
Press SETUP or EXIT to
exit.
BD/DVD playback using the Disc Menu
• BD/DVD disc menu options are listed in the top menu or
disc guide (Options such as subtitles, audio languages).
Start playback by selecting a title from the top
menu
Press TOP MENU.
1
TOP
MENU
1
3
Press a/b to select the subtitle language,
2
then press ENTER.
Using the disc menu
Press POP-UP MENU.
1
2
Press a/b to select “SUBTITLE
LANGUAGE”, then press ENTER.
1 English
2 Español
3 Français
3
Press a/b to select the subtitle language,
then press ENTER.
4
Press SETUP or EXIT to exit.
2
Jazz
Classic
SUBTITLE LANGUAGE
Latin
4
Rock
Printed in Malaysia
TINSEA126WJQZ
07P08-MA-NG
Loading...