SHARP ARRP1 Technical Report

SERVICE MANUAL

Digital Copier Reverse Single Pass Feeder (RSPF)

MODEL AR-RP1

CONTENTS

[ 1 ] PRODUCT OUTLINE................................................................................1

[ 2 ] SPECIFICATIONS....................................................................................1

[ 3 ] UNPACKING AND INSTALLATION .........................................................1

[ 4 ] EXTERNAL VIEW AND INTERNAL STRUCTURE..................................4

[ 5 ] OPEREATIONAL DESCRIPTIONS..........................................................4

[ 6 ] ADJUSTMENTS........................................................................................6

[ 7 ] DISASSEMBLY AND ASSEMBLY............................................................7

[ 8 ] MAINTENANCE......................................................................................13

[ 9 ] ELECTRICAL SECTION.........................................................................14

Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.

This document has been published to be used

SHARP CORPORATION

for after sales service only. The contents are subject to change without notice.

[1] PRODUCT OUTLINE

[3] UNPACKING AND

This machine is a duplex document auto fee der attached to a digital copier.

It feeds originals automatically to allow continuous copying.

[2] SPECIFICATIONS

Document set direction

Document set position

Document transport system

Document feed sequence

Document size AB series: A3 ~ A5

Document weight 56 ~ 90g/m Document set

quantity Dimensions 583mm (W) x 435mm (D) x 131mm (H) Weight About 5.4 kg Power source Supplied from the copier. Document size

detection Detection size Japan: A3, B4, A4, A4R, B5, B5R

Multi copy Without E-Sort PWB installed:

Mixture of differe nt document sizes

Random paper feed Not available Document reverse Not allowed Display section (LED) None Document exchange

speed

Face up

Center reference

Sheet through type

Top take-up feed

Inch series: 11 x 17 ~ 8 . 5 x 5.5 Duplex invoice not available

, 11 ~ 23.9lbs

Max. 30 sheets (90g/m 4mm)

On the document feed tray

Inch series: 11 x 17, 8.5 x 14, 8.5 x 11,

EX AB series: A3, B4, A4, A4R, A5

S D

With E-Sort PWB installed:

S D

Mixture paper feed : Not available d uring copying. Available during FAX (same width only)

S 16 sheets/min

8.5 x 11R, 8.5 x 5. 5

S enable, S D disable D disable, D S enable

S enable, S D enable, D enable, D S enable

, max. thickness

INSTALLATION

1. Unpacking

For unpacking, refer to the figure below.

Name Q’ty Core 1 Cushion 1 SPF glass holding cover 1 SPF harness 1 Intermediate tray (AR-RP1) 1 Step screw 2 Manual 1

2. Installation

1) Remove the document cover.

Lift the document cover and remove it from the copier.