Page 1
DIGITAL COPIER: AR-5040/5132/5125
Date
:
May. 31, 1999
No. : ARE-166
ACTION TO ESTABLISH UNIFORMITY OF PARTS FOR THE HEAT
ROLLER BEARING CARRIED OUT AS A MEASURE TO IMPROVE
PRODUCTIVITY.
1.Model Name: AR-5040/5132/5125
2.General: A change has been carried out in the heat roller bearing used in the fusing units of the
models listed above. The heat roller bearing has been changed to the one used in other
models, as a measure to establish uniformity of parts. This action has been carried out
as a measure to improve productivity.
3.Action: * Running change carried out from 1999 mid-April production.
Ref.
Model
No.
AR-5040
AR-5132
AR-5125
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
3. Current type cannot be used in place of new type.
Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Version P/G No.
name
20 -30
All
19 -32
New type cannot be used in place of current type.
New type can be used in place of current type.
Current parts New parts
Parts code Parts code
NBRGY0295FCZZ NBRGY0599FCZZ AU
Price
rank
5. Interchangeable if replaced with same types of
related parts in use.
6. Others.
Upper heat roller
bearing
Parts name
Effec-
Inter-
tive
change-
time
ability
* 1 Q’ty: 2
Note
SHARP CORPORATION Document Division I
Green
C
Loading...