DIGITAL COPIER : AR-280
Date
:
Mar. 2, 1999
1. ESTABLISHMENT OF UNIFORMITY OF SOME OF THE PARTS IN THE TRAY UNIT
CARRIED OUT AS A MEASURE TO IMPROVE PRODUCTIVITY.
2. DECREASE IN THE NUMBER OF FIXING SCREWS USED IN THE F/R MANUAL
HOLDERS CARRIED OUT AS A MEASURE TO IMPROVE PRODUCTIVITY.
3. DECREASE IN THE NUMBER OF SCREWS USED IN THE VERTICAL TRANSPORT
UNIT CARRIED OUT AS A MEASURE TO IMPROVE PRODUCTIVITY.
No. : ARE-147
1. Establishment of uniformity of some of the parts in the tray unit carried out as a
measure to improve productivity.
1.Model Name: AR-280/285/335
2.General: Uniformity with model AR-405 has been established with some of the parts in the tray
unit of the models listed above. This action has been carried out as a measure to
improve productivity.
3.Action: From the 1st lot of 1999 January production.
Please refer to the parts list for details concerning each of the changes described
above. In addition, since the form of the unit after the changes have been carried out is
the same as for model AR-405, please refer to the parts guide.
SHARP CORPORATION Reprography Division
1/3
Green
C
2. Decrease in the number of fixing screws used in the F/R manual holders carried out
as a measure to improve productivity.
1.Model Name: AR-280/285/335
2.General: A decrease in the number of fixing screws has been carried out for the F/R manual
holder of the multi-manual unit. The number of fixing screws has been changed from 2
each to 1 each. This action has been carried out as a measure to improve productivity.
Discontinued
3.Action: Running change carried out from 1999 January production.
3. Decrease in the number of screws used in the vertical transport unit carried out as a
measure to improve productivity.
1.Model Name: AR-280/285/335
2.General: Some of the screws in the vertical transport unit have been discontinued in accordance
with a change that was carried out in the shape of the transport stay (the addition of a
hook was carried out) of the vertical transport unit. This action has been carried out as a
measure to improve productivity.
Discontinued
Discontinued
Discontinued
3.Action: From the 1st lot of 1999 January production.
2/3
Ref.
No.
Model
name
Version P/G No.
Current parts New parts
Parts code Parts code
Price
rank
Parts name
Effec-
tive
time
Inter-
change-
ability
Note
39 -20 LPLTM5415FCZZ
39 -29
39 -19 XBPSD40P08KS0 Screw (4 × 8 KSO)
39 ---- CSFTZ2553FC01 AN Lift shaft N AS
1
AR-280
AR-285
AR-335
2
3
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
39 -26
39 -27 NGERK1272FCZZ NGERK1272FCZ1 AF Gear
All
39 -17 MSPRC2641FCZ1 MSPRC2640FCZZ AC Rear plate spring
39 -9 LX-WZ2028SCZZ Discontinued Washer
39 -8 XEBSD30P08000 LX-BZ0884FCZZ AB Screw (3 × 8)
39
33 -1
22 -9 LSTYP0229FCZZ LSTYP0229FCZ1 AX Transport stay right
22 -24 LX-BZ0144FCZZ
22 -21
NSFTZ2466FCZZ Lift shaft
MSPRC2642FCZZ MSPRC2642FCZ1 AB Tray earth spring
---- LPINS7062SCZZ
XHBSE40P08000
XEBSD40P10000 Screw (4 × 8) Q’ty: 4
Discontinued
Q’ty Change:
5 → 3
Discontinued
5. Interchangeable if replaced with same types of
related parts in use.
6. Others.
Lift plate
1st lot
’99/1
PIN
AA
Screw (4 × 8) 6
Screw Q’ty: 2
4
3/3
Loading...