SHARP ARE047 Technical Report

DIGITAL COPIER : AR-5040
Date
:
Aug. 1, 1997
No. : ARE-047
1.CHANGES CARRIED OUT IN THE FINISHING UNIT AS A MEASURE TO IMPROVE PRODUCTIVITY.
2.CORRECTION CARRIED OUT IN THE PARTS GUIDE.
1. Changes carried out in the finishing unit as a measure to improve productivity.
1.Model Name: AR-5040
2.General: A change has been carried out in the materials used for some of the parts used in the
finisher unit. These changes have been carried out as a measure to improve productivity. Please refer to the parts list for details concerning the parts in which changes were carried out, and their part codes.
3.Action: From the 1st lot of 1997 July production.
2. Correction carried out in the parts guide.
1.Model Name: AR-5040
2.General: A change has been carried out in some of the screws in certain locations since the 1st lot
of mass production. In accordance with this change a correction was necessary in the parts guide and has therefore been carried out.
Two grounding terminals are secured by one screw.
The circled section indicates the screws in which the change was carried out.
SHARP CORPORATION Reprography Division
1/2
Green
C
Ref.
No.
Model
name
Version P/G No.
51 -9 LFRM-0776FC11 LFRM-0776FC12 AV FIN frame F
Current parts New parts
Parts code Parts code
Price
rank
Parts name
Effec-
tive
time
Inter-
change-
ability
Note
1
AR-5040 All
51 -11
51 -96 LFRM-0777FC11 LFRM-0777FC12 BA FIN frame R
53 -45 CSOU-0113FC01 CSOU-0113FC03 AZ Staple tray
51 -51
51 -44 PGIDH1510FCZZ PGIDH1510FCZ1 Upper FIN paper guide B
51 -27 PGIDH1511FCZZ PGIDH1511FCZ1 Lower FIN paper guide A
51 -117 PGIDH-1509FCZZ PGIDH1509FCZ1 Upper FIN paper guide A
51 -62 PGIDH1512FCZZ PGIDH1512FCZ1 AL Lower FIN paper guide B
52 -41
52 -38 LFRM-0786FCZZ LFRM-0786FCZ1
52 -36 LFRM-0787FCZZ LFRM-0787FCZ1 Elevator frame C
52 -32
52 -37 CFRM-0782FC01 CFRM-0782FC02
51 -61 MLEVF0613FCZZ MLEVF0613FCZ1 FU lock lever
48 -19 XCTSD40P08000
48 -20 MSPRT2127FCZZ Staple spring
LFRM-0793FC11 LFRM-0793FC12 AT FIN frame FB
PGIDH1432FCZZ PGIDH1432FCZ2
LFRM-0779FCZ1 LFRM-0779FCZ2 AX Elevator frame
CFRM-0781FC02 CFRM-0781FC03 Roller frame F
Discontinued ----
Upper sub paper guide
AN
Elevator frame B
AQ
Roller frame R
AP
Screw
1
1st lot
’97/7
6
4 -62
2
1 -7
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type. New type cannot be used in place of current type.
3. Current type cannot be used in place of new type. New type can be used in place of current type.
Parts marked with ‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Q’ty 2:
XBPSD30P08KS0
Q’ty 4:
XHBSE40P10000
Q’ty 1:
XBPSD30P06K00
Q’ty 4:
XBTSE40P04000
5. Interchangeable if replaced with same types of related parts in use.
6. Others.
Screw (3 × 6)
AA
Screw (4 × 4)
Only corrections in the parts guide.
---- ----
2/2
Loading...