DIGITAL COPIER : AR-5132
1. MEASURE CARRIED OUT TO ALLEVIATE PROBLEMS OF ELECTRICAL NOISE.
2. MEASURE CARRIED OUT TO STABILIZE THE RETURN OF THE PPD1 ACTUATOR AND
MEASURE CARRIED OUT TO ALLEVIATE PROBLEMS OF ABNORMAL NOISE WHICH HAD
BEEN OCCURRING DURING PAPER FEEDING OPERATIONS.
3. MEASURE CARRIED OUT TO ALLEVIATE PROBLEMS OF JAMS IN THE U-TURN PAPER
GUIDE SECTION.
No. : ARE-046
1. Measure carried out to alleviate problems of electrical noise.
1.Model Name: AR-5132 (for machines bound for the U.K., Germany, Europe, and Australia markets).
2.General: The addition of a mesh harness has been carried out to the rear side of the ADU unit.
This change has been carried out as a measure to alleviate problems of electrical noise.
ADU unit rear side
Mesh harness
3.Action: From the 1st lot of 1997 February production.
2. Measure carried out to stabilize the return of the PPD1 actuator and measure
carried out to alleviate problems of abnormal noise which had been occurring
during paper feeding operations.
1.Model Name: AR-5132
2.General: <1> There had been problems of abnormal noise in the transport DV guide section
which occurred during copy paper feeding operations. As a measure to alleviate
these problems, the diameter of the transport roller was changed from ø18 to ø18.5.
This change was carried out as a measure to decrease the abnormal noise.
<2> A change has been carried out in the load of the spring of the PPD1 actuator.
The load has been changed from 10g to 11g. This change has been carried out
as a measure to stabilize the return of the PPD1 actuator.
3.Action: <1> → From the 1st lot of 1997 March production.
<2> → From 1997 mid-May production.
SHARP CORPORATION Reprography Division
1/2
Green
C
3. Measure carried out to alleviate problems of jams in the U-turn paper guide section.
1.Model Name: AR-5132
2.General: There was a possibility of jams occurring in the U-turn paper guide of the transport unit
when copies were delivered from the ADU during double-side copy mode operations. As
a measure to alleviate this problem, the measure described below has been carried out.
3.Description: A change in the thickness of the abnormal noise prevention sheet which is attached to
the U-turn paper guide has been carried out. The thickness of the abnormal noise
prevention sheet has been changed from t= 0.25 to t=0.125.
U-turn P/G sheet R
(PSHEP4500FCZ1)
U-turn P/G sheet F
(PSHEP4499FCZ1)
Edge of double sided tape
aligned with the standard.
U-turn P/G sheet R
U-turn P/G sheet F
4.Action: From 1997 mid-May production.
Ref.
Model
No.
name
1
2
AR-5132
(1)
2
(2)
3 19
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Version P/G No.
U.K.
Germany
Europe
Australia
All
33 ---- DHAI-2805FCZZ AG Mesh harness
20 -48 CROLR0897FC02 CROLR0897FC03 AV Transport roller
20 -46 MSPRT1561FCZZ MSPRT2599FCZZ AE Pawl spring
Current parts New parts
Parts code Parts code
PSHEP4499FCZZ PSHEP4499FCZ1
PSHEP4500FCZZ PSHEP4500FCZ1 U-turn paper guide sheet R
R side
Plate spring
5. Interchangeable if replaced with same types of
related parts in use.
6. Others.
F side
Price
rank
AD
Parts name
U-turn paper guide sheet F
Effec-
tive
time
1st lot
’97/2
1st lot
’97/3
Mid-
’97/5
Inter-
change-
ability
6
3
Note
2/2