SHARP ARE044 Technical Report
DIGITAL COPIER : AR-5040
Date
:
Jul. 1, 1997
1.MEASURE TO PREVENT THE CL LEAD WIRE FROM LIFTING UP.
2.MEASURE TO PREVENT CONTACT WITH THE HOME POSITION
SENSOR DETECTION PLATE IN THE SCANNER UNIT.
No. : ARE-044
1. Measure to prevent the CL lead wire from lifting up.
1.Model Name: AR-5040
2.General: A CL lead wire cover has been added as a measure to prevent the CL lead wire from
rising up.
CL Lead wire cover
Insert into the screw hole
Tighten together with
the step screw
3.Action: From the start of 1997 April production.
2. Measure to prevent contact with the home position sensor detection plate in the
scanner unit.
1.Model Name: AR-5040
2.General: The ground wire from the ORS illumination PWB is fixed to the optical plate, but the
fixing screws were too long, creating the possibility of contact between the ground wire
fixing screw and the detection plate of the home position sensor occurring during
scanner unit operations. As a measure to alleviate this problem, sufficient space has
been secured by changing the fixing screws of the ground wire to shorter screws.
3.Action: From the start of 1997 May production.
SHARP CORPORATION Reprography Division
1/2
Green
C
Ref.
Model
No.
1
AR-5040 All
2
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
3. Current type cannot be used in place of new type.
Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Version P/G No.
name
12
5
New type cannot be used in place of current type.
New type can be used in place of current type.
Current parts New parts
Parts code Parts code
PCOVP1427FCZZ AF CL Lead wire cover
----
LX-BZ0618FCZZ AA Screw (M4 × 4)
5. Interchangeable if replaced with same types of
related parts in use.
6. Others.
Price
rank
Parts name
Effec-
tive
time
1st lot
’97/4
1st lot
’97/5
Inter-
change-
ability
6
Note
2/2
Loading...