DIGITAL COPIER : AR-5132
No. : ARE-043
1. MEASURE TO ALLEVIATE PROBLEMS OF ELECTRICAL
NOISE.
2. MEASURE TO ALLEVIATE PROBLEMS OF JAMS WHICH
OCCUR BEFORE THE FUSING PROCESS.
1. Measure to alleviate problems of electrical noise.
1.Model Name: AR-5132 (Only for machines bound for the destinations of the 200 V series).
2.General: The changes and additions of the parts listed below have been carried out as a measure
to alleviate problems of electrical noise in machines bound for destinations of the 200 V
series.
3.Description: <1> A grounding plate right has been attached to the left side of the rear frame.
M3 screw type speed nut
ø2 hole
Grounding plate right
Rear frame left side
Abnormally
shaped hole
M4 screw type
speed nut
Corner
Screw tip standard B’
M3 × 6 bind taping, 2 types
Square hole
ø5 hole
M4 × 6 bind taping, 2 types
Dimple
SHARP CORPORATION Reprography Division
1/3
Green
C
<2> A grounding plate left has been attached to the fusing drawer attachment plate
(P/G [10]-29) with fixing tape.
Fusing drawer attachment plate
Grounding plate left fixing tape
<3> A change has been carried out in the ICU PWB cover, and the grounding plate left
has been attached.
Grounding plate left
Fusing drawer attachment plate
4.Action: From the start of mass production.
2/3