SHARP ARE041 Technical Report

DIGITAL COPIER : AR-5040

Date

Jun. 26, 1997

No. : ARE-041

[Service Information]

ESTABLISHMENT OF SCANNER UNIT AS A SERVICE PART.

1.Model Name: AR-5040

2.General: The lens base unit and the scanner base unit had been established as separate service

parts, but adjustment operations are very difficult when the two parts have been assembled in the markets. As a measure to alleviate this problem and improve service conditions, the combination of these two parts into a single unit has been carried out and the new single unit has been established as the scanner unit.

3.Description: A Lens base unit: CDAIU0498FC51 (P/G 12 -501)

B Scanner base unit: CDAIU0490FC51 (P/G 12 -502) A + B = Scanner unit: DUNT-6719FC30 (for the 100 V series)

DUNT-6719FC31 (for the 200 V series)

Ref.

Model

No.

AR-5040

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type.

3. Current type cannot be used in place of new type.

Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

Version P/G No.

name

100V

Series

12 ----

200V

Series

New type cannot be used in place of current type.

New type can be used in place of current type.

Current parts New parts

Parts code Parts code

DUNT-6719FC30

DUNT-6719FC31

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Price

Parts name

rank

CQ Scanner unit ---- ----

Effec-

tive

time

change-

Inter-

Note

ability

SHARP CORPORATION Reprography Division

Green