Sharp AL-1035 Parts Guide
q
CODE:00ZAL1035P001
DIGITAL MULTIFUNCTIONAL
SYSTEM
MODEL AL-1035
CONTENTS
1 Exteriors
2 Scanner section
3 Paper feed section
4 Fuser section
5 Main frame section
6 Accessories
Revised Edition
PARTS GUIDE
SHARP CORPORATION
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.
DEFINITION
Rank A : Maintenance parts, and consumable parts which are not included in but closely related to maintenance parts
Rank B : Performance/function parts (sensors, clutches, and other electrical parts), consumable parts
Rank E : Unit parts including PWB
Rank D : Preparation parts (External fitting, packing, parts packed together)
Rank C : Parts other than the above (excluding sub components of PWB)
Because parts marked with "!" is indispensable for the machine safety maintenance and operation, it must be replaced with
the parts specific to the product specification.
F Other than this Parts Guide, please refer to documents Service Manual(including Circuit Diagram)of this model.
F Please use the 13 digit code described in the right hand corner of front cover of the document, when you place an order.
F For U.S. only-Use order codes provided in advertising literature. Do not order from parts department.
<Note for use of the revised Parts Guide>
・Interchangeability of parts is expressed by No1~6 as shown in the table below.
<Interchangeability>
1
Interchangeable.
Current type can be used in place of new type.
2
New type cannot be used in place of current type.
Current type cannot be used in place of new type.
3
New type can be used in place of current type.
4
Not interchangeable.
5
Interchangeable if replaced with same types of releted parts in use.
6
Others.
・New & Addition, Change, Abolition, and Quantity change are expressed with the marks shown in the
table below.
<Change of Division>
New & Addition
Change
Abolition
Q'uantity (increase) /Others
Q'uantity (decrease)
Correction
・Running Change of Effective Time is expressed as R/C.
<Effective Time>
R /C
Running Change
Update : 2012/01/31
1
DEFINITION
The definition of each Rank is as follows and also noted in the list
Rank A : Maintenance parts, and consumable parts which are not included in but closely related to maintenance parts
Rank B : Performance/function parts (sensors, clutches, and other electrical parts), consumable parts
Rank E : Unit parts including PWB
Rank D : Preparation parts (External fitting, packing, parts packed together)
Rank C : Parts other than the above (excluding sub components of PWB)
Because parts marked with "!" is indispensable for the machine safety maintenance and operation, it must be replaced with
the parts specific to the product specification.
F Other than this Parts Guide, please refer to documents Service Manual(including Circuit Diagram)of this model.
F Please use the 13 digit code described in the right hand corner of front cover of the document, when you place an order.
F For U.S. only-Use order codes provided in advertising literature. Do not order from parts department.
Exteriors
1
Inter-
PRICE
NEW
NO. PARTS CODE
1 GCOVH0092QSZ2 AU N D OR cover
2 MHNG-0031QSZZ AC N C OR hinge
3 PSHEZ0675QSZ1 AP N D OR mat
4 PMAGG0004QSZZ AD N C OR magnet(8×30)
6 XHBS730P06000 AC C Screw(3×6)
7 GCAB-0160QSZ1 AN N D Right cabinet
9 LPLTP0551QSZ2 AT N C Bottom plate
10 PGUMS0020QSZZ AC N C Rubber foot
11 GCAB-0159QSZ1 AM N D Left cabinet
13 PGIDM0197QSZ1 AF N D Scanner support guide
14 MSPRC0450QSZZ AD N C Scanner support arm spring
15 XEBS730P08000 AC C Screw(3×8)
16 XEBS730P12000 AC C Screw(3×12)
17 XEBS740P08000 AA C Screw(4×8)
19 PBRK-0001QSZZ AC N C Scanner brake
20 MSPRC0475QSZZ AD N C Scanner brake spring
21 PCOVP0163QSZ1 AH N D Delivery tray S2
22 LSOU-0061QSZ1 AH N D Delivery tray S
23 LSOU-0058QSZ1 AH N D Delivery tray M
24 LSOU-0057QSZ2 AK N D Delivery tray L
25 LSOU-0060QSZ1 AH N D Paper feed tray M
26 LPLTP0544QSZ1 AD N C Paper feed regulation plate
27 PCOVP0162QSZ1 AK N D Paper feed slide pawl cover
28 LSOU-0059QSZ1 AK N D Paper feed tray L
29 TCAUA0032QSZZ AD N D Service caution label
30 TLABZ0916QSZZ AG N D JAM release label
501 CCOVH0092RS51 AZ N E OC cover unit
502 CSOU-0057RS51 AT N E Delivery tray unit
503 CSOU-0059RS52 AT N E Paper feed tray unit
change
RANK
MARK
PART
RANK
DESCRIPTION
TR No.
Effective
time
– 1 –
1
Exteriors
502
501
4
Update : 2012/01/31
2
1
4
2
4
3
2
14
13
21
16
23
19
17
20
22
24
30
29
6
17
7
25
26
27
11
10
15
10
– 2 –
15
10
28
9
15
10
503
SHC00771
2
Scanner section
NO. PARTS CODE
5 CPWBN0250QS31 BH N E Operation panel PWB
8 NBLTH0058QSZZ BA N B CIS drive belt
9 DUNT-1006QSZZ AY N E Tension adjust unit
12 DUNT-0999QSZZ BL N E CIS drive unit
14 CPNLH0075QS01 AL N D Key sheet
21 XBPS720P09000 AB C Screw(2×9)
22 DUNT-0921RSZZ AM N E Inter lock switch unit
23 LPLTM0569QSZZ AC N C Inter lock switch fixing plate
24 XEBS730P08000 AC C Screw(3×8)
26 XEPS730P06X00 AA C Screw(3×6X)
27 GCAB-0161QSZ1 AK N D Right cabinet upper
29 MSPRD0459QSZZ AC N C Lock lever spring
30 PTME-0043QSZZ AC N C Lock pawl
31 NSFTZ0131QSZZ AE N C Lock lever shaft
32 MLEVP0143QSZ1 AE N C Lock lever
33 XHBS730P06000 AC C Screw(3×6)
37 DUNT-0807QSZZ BN N E LSU
40 QSW-B0017QSZZ AF B Switch(D2X-G)
41 DUNT-1003RSZZ AY N E LSU cover unit
42 NSFTZ0128QSZZ AD N C Scanner arm shaft
43 XRESP30-06000 AA C E ring(E3)
45 RSNSZ0002QSPZ BA N B CIS home position sensor
52 XBBS730P08000 AA C Screw(3×8)
53 XWHS720-04043 AA C Washer
54 DUNT-1001RSZZ AG N E Scanner support arm unit
62 LPLTM0565QSZZ AD N C OR magnet plate(8×30)
63 XEBS730P10000 AC C Screw(3×10)
64 TCAUS0022QSZZ AD D Laser caution label
65 TLABH0914QSZZ AD N D Open/close caution label
66 RCORF0021QSZZ AK C Core
502 DUNT-0914QS11 CE N E Scanner/MCU PWB unit
901 DUNT-0915RS11 CB N E Scanner unit
(Unit)
PRICE
RANK
NEW
MARK
PART
RANK
DESCRIPTION
– 3 –
Loading...