Sharp 32SC26B Owner’s Manual

Download

Page 1

Products that have earned the ENERGY STAR® are designed to protect the

environment through superior energy efficiency.

PAGE

° IMPORTANT INFORMATIONIIMPORTANT

SAFEGUARDS .............................. 2-4

• Trademarks ............................. 5

- Supplied Accessories ......................... 5

- Before Operating Your Television ........................... 5

• Antenna Connections .............................. 6-7

• Quick Reference Control Operation .............. 8

. EZ SETUP during First Use .................. 9-10

• Antenna Setup DIGITAL ....................... 10-11

• Accessing the MAIN MENU screen without

Remote Control ............................................. 11

° Channel Call ...................................................... 11

• Changing Viewing Channel ........................ 12

• Language ............................... 13

o Sleep Timer .................................................. 13

• Video Adjust ...................................................... t4

• Audio Select ....................................... 15-16

MTS (Multichannel TV Sound) ..................... 15

SPEAKER (internal Speaker Switch) ...... 15

FAO (Fixed Audio Output) ............................... 15

AUDIO ADJUST .......................................... 16

PAGE

• Closed Caption ............................ t8-19

- Parent Control .......................................... 20-30

V-CHIP Operation ................... 20-27

VIEW TIMER .......................... 28-30

- Energy Save ............................ 31

o Set Up ................................ 32-36

EZ Setup ...................................... 32-33

Channel Setting ................................... 33-35

Blue Screen ............................................ 36

-Auto Input ................................................ 37

• Screen Format ........................ 38-39

• Using the Video and Audio Input Terminals 40-41

o Using the Audio Output Terminals ...... 42

- Before Calling for Service ....................... 43

- Calling for Service ...................... 43

° Warning message for Digital broadcasting 44

', Specifications ......................................... 44

o Limited Warranty .............................. 54

This operation manual includes basic operating

instructions in Spanish and French,

i Digital Audio ............................................................ I7

SPANISH is on page 45-49

FRENCH is on page 50-54

DOiDOLBY[

DIGITAL

Page 2

Welcome to the SHARP Family We are pleased that you are now the owner of a SHARP Cotor Televisior

- built for outstanding quality, reliabilty and performance. Every SHARP Color Television set is tuned and adjusted for proper color and sound, and has passec

through the most stringent quality control tests at the factory. We have prepared this OPERATION MANUAl. so that you may adjust the picture and color to your personal viewing preference We sincerely hope that you receive the greatest satisfaction and enjoyment from your new SHARP Colo_

Television set for years to come Please read these instructions carefuly, and keep them handy for your future reference

IMPORTANT

To aid reporting in case of loss or theft, please record the TV's

model and serial numbers in the space providedThe numbers

are located at the rear of the TV

There are two important reasons for prompt warranty registration of your new SHARP television set. Use the REGISTRATION CARD packed in with the set.

FIRST - WARRANTY This is to assure that you will immediately receive the full consumer benefit of the parts, service and tabor

warranty applicable to your purchase.. SECOND - CONSUMER PRODUCT SAFETY ACT

To assure that you will promptly receive any safety notification on inspection, modification or recall that SHARP may be required to give under the 1972 Consumer Product Safety Act. PLEASE READ

CAREFULLY THE IMPORTANT "LIMITED WARRANTY" CLAUSE ON THE LAST PAGE.

Model No.:

Serial No.:

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO WET LOCATIONS.

The lightning flash with arrowhead within a triangle

is intended to tell the user

CAUTION ]

that parts inside the producl are a risk of electric shock tc

persons.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL

"Note to CATV system installer: This reminder is provided to call the CATV system installer's attention

to Article 820-40 of the National Electrical Code that provides guidelines for proper grounding and, in

particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical."

WARNING - FCC Regulations state that any unauthorized changes or modifications to this equipment

not expressly approved by the manufacturer could void the user's authority to operate this

PRODUCT DISPOSAL

This product utilizes a Cathode Ray Tube (CRT) containing lead and tin-lead solder.

Disposal of these materials may be regulated due to environment considerations. For disposal or recycling information, please contact your local authorities or the Electronics Industries Alliance:

www.eiae.org

The exclamation point within a triangle is intended to tell the

user that important operating and servicing instructions

are in the papers with the appliance.

Page 3

MPoRTANT::Nr0RMAT 0Nico,,i;oUedi..I

CAUTION: ° Do not place theAC power cord under the TV set or other heavy items.

• To prevent fire, never place any type ofcandle or naked flames on the top or near the TV set ° To prevent fire or shock hazard, do not expose this products to dripping or splashing No objects filled

with liquids, such as vases, should be placed on the product.

CAUTION: P,ease rea, a, of these instructions before you operate your television and save

these instructions for later use.

Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure

your personal safety BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARDS In order not to defeat the safeguards incorporated in this equipment, observe the following basic

rules for its installation, use and servicing

1. Unplug this televisionequipment from the wall outlet before cleaning

2. Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning

3. Do not use attachments not recommended by the television equipment manufacturer as they may cause hazards

4 Do not use this television equipment near water i for example, near a bath tub, washbowl, kitchen sink

or laundry tub, in a wet basement, or near a swimming pool, etc..

5r DOnot place this equipment on an unstable cart, stand, or table The television equipment may fall, causing

serious injury to a child or an adult, and serious damage to the equipment. Use only with a cart or stand recommended by the manufacturer or sold with the television equipment

6 Television equipment and cart combination should be moved with care Quick stops,

excessive force, and uneven surfaces may cause the equipment and cart combination to

overturn

7 Walt or shelf mounting should follow the manufacturer's instructions, and should use a

mounting kit approved by the manufacturer

8 Slots and openings in the cabinet and the back or bottom are provided for ventilation.. To

insure reliable operation of the television equipment and to protect it from overheating, these openings must not be blocked or covered. This television equipment should not be placed in a built-in

insulation such as a bookcase unless proper ventilation is provided.

g. The openings should never be covered with a cloth or other material, and the bottom openings should not

be blocked by placing the television equipment on a bed, sofa, rug, or other similar surface. This television equipment should never be placed near or over a radiator or heat register.

10. This television equipment should be operated only from the type of power source indicated on the marking label, ff you are not sure of the type of power supplied to your home, consult your television dealer or local

power company For televisionequipment designed to operate from battery power, refer to the operating instructions

11_ As a safety feature, television equipment is equipped with a 2-wire polarized plug (one plug bfade bigger

than the other). The 2-wire polarized plug will fit only one way into the power outlet. If the plug does not fit, ask your electrician to replace your obsolete outlet Do not modify the plug anddefeat

this safety feature.

12o Do not allow anything to rest on the power cord. Do not locate this television equipment where the cord will

be abused by persons walking on it

Page 4

13 Followallwarningsandinstructionsmarkedonthetelevisionequipment 14 Ifanoutsideantennaisconnectedtothetelevisionequipment,besuretheantennasystemisgroundedso

astoprovidesomeprotectionagainstvoltagesurgesandbuilt-upstaticcharges.Section810oftheNational

ElectricalCodeprovidesinformationwithrespecttopropergroundingofthemastandsupporting structure,groundingofthelead-inwiretoanantennadischargeunit,sizeofgroundingconductors,location ofantenna-dischargeunit,connectiontogroundingelectrodes,andrequirementsforthegrounding

electrode

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

_,./ANTENNA

11F LEADIN

/ _ WIRE

// GROUND-,.,,// _ _N,,_

/ CLAMP_ Ill \\

-p-} ANTENNA

I ........ _"_ I ,/_/1 DISCHARGE UNIT

I !_Vl!_bi,,r I _..._t (NEC sECTION 8'0"20)

L._ ......... "_"--_ _ /_' GROUNDING CONDUCTORS

_ GROUND CLAMPS

NEC--NATtONAL ELECTRICAL CODE (NEC ART 250, PART H)

(NEC SECTION 810-21)

POWER SERVICE GROUNDING ELECTRODE SYSTEM

15. For added protection for this television equipment during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna.This will prevent

damage to the equipment due to lightning and power-line surges

16 An outside antenna system should not be located in the vicinity of overhead power lines or other electric light

or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna

system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

17. De not overload walt outlets and extension cords as this can result in fire or electric shock

18.. Never push objects of any kind into this television equipment through cabinet slots as they may touch

dangerous voltage points or short out parts that could result in a fire or electric shock Never spili liquid of any kind on the television equipment.

19 Do not attempt to service this television equipment yourself as opening or removing covers may expose

you to dangerous voltage or other hazards Refer all servicing to qualified service personnel

20 Unplug this television equipment from the wall outlet and refer servicing to qualified service personnel under

the following conditions: A. When the power cord or plug is damaged or frayed. B If liquid has been spilled into the television equipment C If the television equipment has been exposed to rain or water

D If the television equipment does not operate normally by following the operating instructions. Adjust only

those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore

the television equipment to normal operation.. E If the television equipment has been dropped or the cabinet has been damaged F When the television equipment exhibits a distinct change in performance i this indicates a need for

service,

2t. Upon completion of any service or repairs to this television equipment, ask the service technician to

perform routine safety checks to determine that the television is in safe operating condition

22. When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards

Page 5

OOIOOLBY/°

DIGITAL

Dolby and the double-D symbol are registered trademarks of Doiby Laboratories

Oo :::::::1

:0:J

Infrared Remote Control

Location

o For normal operation, your TV should be located in an area of the room where cool adequate

ventilation is provided Do not place the back of the television set in a place where free airflow will be restricted°

o Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys using

magnets or any other magnetic substance, such as iron are kept well away from the TV set.

Power

Your TV operates on 120 Volts, 60 Hz (normal household current) and has a polarized plug If you are unable to insert the plug fully into the outlet, try reversing the plug. Should it fail to fit, contact an

electrician. Do not defeat the safety feature of the polarized plug.

- If the set is not going to be used for a long period, such as during a vacation, unplug the set from the wall outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with the

POWER BUTTON in the OFF position.)

o Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located

near the TV and both radio and TV broadcasts are being received. Should such noise appear, turn

off the radio.

• If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received due to interference from the TV.

Size AA

Dry Batteries

Before using the television, prepare the Remote Control

To use the remote control, insert batteries first

Inserting the batteries

Pull up

o With your thumbnail, pull up the slit as indicated by the arrow to remove the battery cover. Insert two

batteries (size "AA"). Be sure to match the battery O/O terminals with the O/O marks inside the compartment..

Battery Cover

Page 6

Antennas

o The antenna requirements for good color television reception are more important than those for black &

white television reception.. For this reason, a good quality outdoor antenna is strongly recommended. The following is a brief explanation of the type of connections that are provided with the various

antenna systems:

1. A 75-ohm system is generally a round cable with F-type connector that can easily be attached to

a terminal without tools (not supplied)

75-ohm coaxial cable (round)

2, A 300-ohm system is a flat "twin-lead"cable that

can be attached to a 75-ohm terminal through a 300175-ohm ADAPTOR (not supplied)

• Refer to one of the following two diagrams when connecting to an outdoor antenna, A: Using a VHF/UHF combination outdoor antenn&

B: Using separate VHF and/or UHF outdoor antenna.

o Connect an outdoor antenna cable lead-in to the ANT/CABLE terminal on the rear of the TV set,

A. Combination VHF/UHF Antennas B. Separate VHF/UHF Antenna

300175-ohm _,,. ADAPTOR 5_/-_/

VHF/UHFANTENNA (Not supplied) "4,1/

"_,L//., _ 300-ohm I_

,1y

VHF/UHF ANTENNA

ANTENNA ANTENNA _2_:_ _ ::::;:]_]l

300-ohm twin-lead cable (flat)

F4ype connector

REAR OF TV

1 .........-1

REAR OF TV

/_\ C°MBIN_Rr-

I 300-ohm \(nol supplied) 1 n L Iwin-lead\Fi--i-I I #_ a

[- ---------T--_ NN nl IT_ I _

75-ohm c _

Page 7

F-type connector should be finger-tightened only,

F-type connector

75-ohm coaxial cable

o A 75 ohm coaxial cable connector is built into the set for easy hookup° When connecting the 75 ohm

coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR.

o Some cable TV companies offer "premium pay channels'L Since the signals of these premium pay

channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by

the cable TV company This converteddescrambler is necessary for normal viewing of the scrambled

channels. (Set your TV on channel 3 or 4.Typically one of these channels is used. If this is unknown, consult your cable TV company) For more specific instructions on installing cable TV, consult your

cable TV company. One possible method of utilizing the converter/descrambler provided by your cable TV company is explained below.

Please note: RF switch equipped with position A/B (not provided) is required. "A" position on the RF switch (not supplied) : You can view all unscrambled channels using the

TV's channel keys. "B" position on the RF switch (not supplied) : You can view the scrambled channels via the converted

When connecting the RF cable to the TV set, do not

tighten F-type connector with tools.

If tools are used, it may cause damage to your TV set

(The breaking of internal circuit, etc.)

descrambler using the converter's channel keys.

RF switch (not supplied)

,.L_- __.._Ispli.e.

CableTV converter/ 1

descramb[er

(not supplied)

o Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner tha

might be required.

Cable TV Line

Page 8

o Part Names

POWER Press -4 On

Press again -e Off REMOTE CONTROL

SENSOR

Press _->Accesses MAIN MENU Press again _ Exits MAIN MENU

POWER Press -e On,

Press again --+ Off

REMOTE KEYPAD Accesses any channel from

FLASHBACK

• Returns to previous channel

VOLUME UPtDOWN

(+) Increases sound

(--) Decreases sound . Changes or selects the TV

adjustments on On-Screen Displey

MUTE Press _ Mutes sound Press again _ Restores sound

VOLUME UP/DOWN (-1_)Increases sound

(--) Decreases sound

VIDEOIAUDIO [_ TERMINALS

CHANNEL UPfDOWN (,6,) Selects next higher channef

(_') Selects next lower channel

infrared transmitter Window

INPUT

Press --_ Switches to external video

INPUT I mode.

Press twice -_,witches to external video

INPUT 2 mode

Press 3times -_ Switches back to the

original TV mode See page 41

Used in some instances where a Cable Converter Box requires an "enter"

command after selecting channels,

when using the REMOTE KEYPAD button

•Used to confirm the channel selection

CHANNEL UP/DOWN

(A) Selects next higher channel

(V) Selects next iower channet * See pages 33-34 for Channel

Setting.

, Moves the" @ "mark on the MENU

screens

Press -e Accesses MAIN MENU. Press again --e Exits MAIN MENU

DISPLAY

Press -_ Displays receiving channel for

4 seconds

Press again -_ Removes display

• Temporarily displays receiving channel when in Closed Caption

mode

• The TV set and remote control illustrations and the on-screen dispIays in this manual may differ from their actual appearance

Page 9

When you turn on the TV for the first time, it will automatically memorize the broadcasting channels.

Please perform the following instructions before pressing the POWER button.

(1) Insert the batteries into the remote control. (See page 5) (2) Connect the antenna cable to theTV set. (See pages 6, 7)

(3) Plug in the AC POWER cord to the wall outlet.

QQQ O0O

QOQ

0--

VOLUME

(+ )t(-)

CHANNEL

uP(A)!

DOWN (V)

- MENU

Press the POWER button on the TV set or on the Remote Control

to turn on the TV. The SELECT LANGUAGE screen will be

displayed.

(On the Set) (On the Remote Control)

POWER POWER

Press CH A/V' to select "ENGLISH", "ESPANOL (SPANISH)" or

"FRANCAIS (FRENCH)".

Press VOL +/- to access the EZ SETUP screen.

SELECT LA_IGUAGE

•ENGLISH

ESPAfiOL FRANCAIS

SELECT;CHAir SET :VOL+I-

SELECTLANGUAGEscreen

SELECT LANGUAGE

eENGLISH

ESPA_OL FRA_ICA}S

SELECT;CH A/Y

SET ;VOL+/-

CONNECT At4TENNA O£ CABLE

START EZ SETUP?

eSTOP START

(EZ SETUP screen)

Press VOL +.

The tuner wilt automatically search for the

broadcasting or cable TV channels for ANALOG. (The CH No. will automatically increase when it

appears.,)

Once tuning for analog broadcasting channel is finished, tuning for digital channel will start. If cable

TV channels is detected, it will not proceed to digital channel tuning.

If you want to stop the EZ SETUP process once it has started, press VOL - and it will be canceled.

tf you want to SET UP again, please refer to page 33, 34 on SET UR

To cancel EZ SETUP

Press VOL -o

(STOP)

(START)

(Analog channel tunning)

PLEASE WAIT

AUTO PROORNZMING

STOP eSTART

(Digital channel tunning)

PLEASE WAIT

AUTO P£OGRNi_IRG

DIGITAL 69

STOP eSTART

Page 10

5 Once EZ SETUP is complete, the lowest channel number 2]

memorized will be displayed. (e.g. Channel 2)

o If EZ SETLJP does not memorize all the channels in your region, please refer to pages 33-35 for

more information on manually memorizing the channels using CHANNEL SETTING.

o It may be difficult to PRESET when the broadcast signals are weak, the channel cycle frequency is

incorrect or frequency jamming is occurring around the area. Please refer to pages 33-35 for more information on manually memorizing the channels using CHANNEL SETTING.

e In order to receive digital air broadcasts, you need a digital broadcast antenna, You can set

the antenna configuration through the Antenna Setup Digital screen.

1 Press MENU to access the MAIN MENU screen, 2 Press OH APe" to move the "0" mark to "SET UP".

Press VOL +/- to access the SET UP screen, then press CH A/V to move the "0" mark to "CH SETTING".

4 Press VOL +/- to access the CH SETTING screen, then press

CH A!V to move the "0" mark to select "ANTENNA SETUP DIGITAU'.

, Antenna Setup Digital can only be select -_

during Digital Channel

A_EitU

_SLEEP TIMER II_}VIDEOADJUST E]AUDIO SELECT _DIGITAL AUDIO _¢LOSED CAPTION _PARENT CONTROL _ENERGY SAVE

@_SET UP

(MAIN MENU screen)

_$ET UP

BLUE SCREEN LANGUAGE

OQ_ SETTING

AUTO INPUT S(REEN FOA_,_AT

(SET UP screen)

GH _EITItIG

E Z SEIUP AHV ANA_,OG CA_;E At_ALOG C_ SEARCH DIGITAL CH SEARCH C4 t_E_ORY

OANTENNA SETUP-DIGITAL

(CH SETTING screen)

5 Press VOL +/- to access ANTENNA SETUP - DIGITAL

screen.

[] SIGNAL STRENGTH

(i) Press OH A/V to select "SIGNAL STRENGTH". (ii) Adjust the direction of the antenna to obtain the signal

strength level 60 or higher..

'10

(ANTENNA SETUP-DIGITALscreen)

Page 11

[] CHANNELSTRENGTH

Makesurethesignalstrengthofeachchannelreceivedisfinelyadjusted. (i) PressCH,&/_' to select "CHANNEL STRENGTH".

(ii) Input channel number (2-69) using REMOTE KEYPAD

(0-9) button.

(iii) Adjust the direction of the antenna to obtain the signal

strength level 60 or higher.

QOO QO@

C)®Q

o This function is available for DIGITAL channel only,

6 Press MENU to exit. O

. If you misplaced your Remote Control you can still access most settings (On the Set)

via the MAIN MENU screen by pressing MENU on the TV set. MENU

o Some features of your TV set are not accessible without the Remote ,_

Control. If you lost your Remote Control, contact a Sharp Service Center for a replacement,

To display receiving channel information,

Press DISPLAY once. The display appears as shown on right°

o If the viewing channel is a digital channel, the information of channel number, audio service type,

broadcast station, program information and V-Chip rating wilt appear°

i? DIGITAL

4:) TV PG D!SV

DISPLAY

(whiteviewingdigitatchannel)

2 Press DISPLAY twice. The timer information screen will appear,

O_SPLAY

OSIEREO eOR AiR

SAP *'Ot_A_R

'whileviewinganalogchannel)

SLEEP TIMER

VI_VING TIME

IOH 00_ RE}_AIR

OISPLAY

3 Press DISPLAY again to return to normal screen, O

ANALCG

t2_ RE_,_AIN

Page 12

Please note: your new Television is capable of receiving the full

range of AIR-TV channels available today, from the most advanced digital channels, to the more traditional analog channels° As the transition toward full digitalTV continues, some AIR-TV systems

in the USA wilt have a mixture of analog and digital channels in

their lineups.

[] You can change channels in several ways.

G>OGb

OQO QQO

M_J_U

O--

VOLUIvlE

(+)t(- 1

CHANNEL

uP(A}I

DOWN(v)

- MENU

Method 1 (On the Set) Using CH A/_' on the remote

control unit or on the TV set, (_

Method 2

(i) Press FLASHBACK to switch to the previously tuned channel. @ (ii) Press FLASHBACK again to switch back to the currently tuned channel.

o FLASHBACK will not work if no channel has been changed after TV is turned on

Method 3

Using REMOTE KEYPAD buttons (0-9 and ENTER) to select up to I25 channels for VHF/UHF/

CATV. To select a 1 or 2-digit analog channel number (e. g., Channel 5): @ O

button

(whileviewing

digitalchannel)

51 a1

Press 5 -_ ENTER

4:_ TV PG DLSV

QSTEREO _,ON A_R

SAP _-OR AiR

MO_O

_hile viewinganalogchannel)

FLASHBACK

QOQ

AtIA£¢G

o When selecting a 1-digit channel number, it is not necessary to press 0 before the number o When you enter 0-9 only, channel selection will be made if there is no operation for a few seconds

To select a 3-digit analog channel number (e. g., Channel 115):

111 I15]

Press 1 -_ 1 -_ 5 -_ ENTER

= When you enter 0-9 only, channel selection will be made if there is no operation for a few seconds. , If you push "0" by itself, nothing wilt happen.

To select a digital channel number (e. g. Channel 10.1):

10 101 101]

Press I -_ 0 -_ • (DOT) --) 1 -e ENTER

o Complete the above steps within a few seconds.

When you enter 0-9 and o(DOT), channel selection will be made if there is no operation for a few seconds

Page 13

The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH.

Press MENU to access the MAIN MENU screen_

'MAIN MENU screen

Press CH ,_,/_ to move the "0" mark to "SET UP"..

Press VOL +/- to access the SET UP screen, then press CH `&iv" to move the "O" mark to "LANGUAGE"..

Press VOL +/- to access the LANGUAGE select screen.

Press CH ,&IV' to select "ENGLISH", "ESPANOL (SPANISH)" or

"FRANCAIS (FRENCH)"..

_SLEEP T_EA _UD_O EELECT

_OIG_TAL AUOIO _LO_ED CAPTION

_PA£ENT COtJ_ROL _EItE_GY SAVE

_ET UP

_LUE _C_N

(SET UP screen)

_At_GUAGE

OEN_LISH

ES#A_0L

LANGUAGEselectscreen

iDtOt_A

tEN_L_SH

eE_PA_OL

_F_A_CAIE

6 Press MENU to exit. @

e You can preset your television to turn off automatically in increments of 30, 60, 90 or 120

minutes.

"l Press MENU to access the MAIN MENU screen_

2 Press VOL +/- to access the SLEEP TIMER screen°

M_NU

3 Press VOL +/- to set a sleep time of 30, 60, 90 or 120 minutes,,

MEt_

e{_3SLEEPT_E_

_"VtDE0 AOJUST _?J_D_0 SELECT _D_G_T_L AUD_0 _'_CLOSED_APTI01t _PA_E_T CGI_TR0_ E'_E_EBGY_AVE

_SET UP

SLEEPTIME_

4 PressMENUteexit _ ___> MENU

• To turn off the SLEEP TIMER, repeat the above SLEEP TIMER steps and

select "- - - M REMAIN '_during step 3. SLEEP TIMER screen)

Remote's DISPLAY key is pressed twice, 5 minutes before the SLEEP TIMER turns off the TV, the screen prompts the

time remaining for 4 seconds The SLEEP TIMER shows a similar display for each remaining minute and a lO-second

i hile SLEEP TIMER is active, the time remaining will be briefly displayed on=screen at regularintervals or when the

display right before shutting off the TV.

If you turn the POWER OFF, the SLEEP TIMER wilt automatically reset

Page 14

Setecteditem VOL+ button PICTURE Toncreasecontrast

TiNT Tomakeskintonesgreenish COLOR Toincreasecolorintensity

BFtGHT Toincreasebriehtness SHARP Toincreasesharpness

COLORTEMR RESET

Tochoose..,tLOW,ML,MHorHiGHcolortone. Toreturnalladjustmentstofactorypresetlevels

VOL- button

Todecreasecontrast Tomakeskintonespurplish

Todecreasecolorintensity Todecreasebrighlness Todec[easesharpness

VOLUME

®®® tt t÷l,/-I

®®® II

__ HANNEL

'_ MENU

up(A)/

DOWN(V)

Press MENU to access the MAIN MENU screen_

Press CH ,_,/V to move the "_" mark to "VIDEO ADJUST'.

MERU

_SLEEP TIMER

OiDJV)DEOADJUST

'_-AUD_OSELECT _DIG{TAL AUDIO _CLOSED CAPTIOH _PARERT CORTROL _ERE_GY SAVE

_SET uP

(MAIN MENU screen)

Press VOL +/- to access the PICTURE adjust screen. o The word "DIGITAl" will appear to show viewing channel is a

digital channel.

PICTURE adjust screen

Press OH A/V to select the desired adjustment item, (Refer to the diagram below)

1 t _ t

_:CHA -.:CH ?

D_GITAL

IIliIll!lll!]i}IIIltliIltUlltIllllltllillIlllltlIIi

PICTURE 50

Press VOL +/- to adjust the setting.

Itl]IIII!ItflIIttlIII!I!III{IIIIIHIIIIItlItlIII]t!I

-- VOL -

P_CTUR6 50

VOL + increases contrast --

decreases contrast

DIGITAL

6 Repeat steps 4 to 5 to adjust other settings.

7 Press MENU to exit. 0

o VIDEO ADJUST setting, once set, is shared among AIR/CABLE, INPUT 1, INPUT 2, and INPUT 3

modes

° VIDEO ADJUST setting for INPUT 3 when used as COMPONENT can be set independently.

1_, VIDEO ADJUST setting for Digital Channel can be set independently,

Page 15

_ _ X_U_O_ _C_ ..... • jl jUll I r I '

[]

MTS (iVlultichannel TV Sound) (For Analog Channel only)

........ ,, , , , Id

This function allows reception of stereo or bilingual TV sound.

You can enjoy Hi-Fi stereo sound or SAP broadcasts where available,

Stereo broadcasts Live television broadcasts of sports, shows, concerts, etc. can be received in dynamic stereo

sound. SAP broadcasts

Television broadcast can be received with either MAIN or SAP sound.

MAiN sound: The normal program soundtrack. (Monaural or stereo where available.)

SAP sound: Second language, supplementary commentaries, etc. (SAP sound is monaural°)

If stereo sound is difficult to hear;

You can obtain clearer sound by manually switching to fixed monaural mode.

[]

SPEAKER (Internal Speaker Switch) This function turns the TV's internal speakers "ON" or "OFF" when listening to sound from

external speakers by using the AUDIO OUTPUTTerminals. (See page 42),

[]

FAO (Fixed Audio Output)

This function turns the TV's internal speakers "OFF" and allows fixed audio output from the AUDIO OUTPUTTerminals. (See page 42), With FAO, theTV's volume control is disabled.

Press MENU to access the MAIN MENU screen, Press CH _/V to move the "_" mark to "AUDIO SELECT",

3 Press VOL +/- to access the AUDIO SELECT screen.

4 Press CH A/V to move e _ mark to MTS, SPEAKER,

th .............. FAO"

or "AUDIO ADJUST".

° If the viewing channel is a digital -+

channel, MTS cannot be selected

Press VOL +/- to select"STER EO", "SAP" or"MONO" when the

"@" mark is at "MTS" position

MTS

t t

SPEAKER FAO

t + t I

_,_ENU

_SLEEP TIMER _VIDEO AOJUST

eZEIAUDIOSELECT

_DIGITAL AUDIO

_CLOSE0 GARTIO_

(_PARENT CONTROL

_IENERGY SAVE

_SET UP

(MAIN MENU screen)

E]AUDIO SELECT

O_{TS :STEREO

SPEAKER

FA0 i_F

AUDJ0 AOJUST

AUDIO SELECT screen'

EZ_AUDIO SELECT

OP+_TS :STEREO

SPEAK_R

FAo !_F

AUDIO ADJUST

AUDIO SELECT screen

i(F0r Anat0g

Channel0nly)

Page 16

[] AUDIO ADJUST

When the "_" mark is at "AUDIO ADJUST", press VOL +/- to access the AUDIO ADJUST screen. To access the desired item, press CH A/_L To adjust the audio setting, press VOL +/-,.

[TREBLE ] ___[ BASS__J__ [BALANCE] _ [ RESET J

Selected item vOL + buttOn I VOL - button TREBLE Toincreasetrebleresponse, Todecreasetrebleresponse.

BASS Toincreasebassresponse. To,,dec,reas,ebassresponse. BALANCE Toemphasizetheright Toemphasizetheleft

speaker'svolume speaker'svolume

RESET Toreturnall adjustmentsto factorypresetlevels

6 Press MENU to exit. @

An example screen displaying ON AIR Analog Channel when receiving stereo broadcasts

TREBLE 0

Current channel number

-12

"e-- ON AIR" will appear next to STEREO or SAP when receiving STEREO or SAP

broadcasts.

• Once MONO mode is selected, the TV sound remains monaurai even if the TV set receives a stereo broadcast. You must switch the mode back to STEREO if you want to hear stereo sound again,

,, Selecting MTS while receiving video signals from INPUT terminals does not change the type of sound;

in this case, sound is determined by the video source,.

o If "FAO" mode is on, "SPEAKER" mode will automatically turn off. Changing "SPEAKER" setting will

not affect "FAO" mode.

OSTEREO_

SAP FON AIR MO_O

(AnalogCHANNELcallon screen)

Page 17

e This feature allows you to select the Primary and Secondary language and as well the type of

audio transmitted in a digital broadcast. If the viewing channel is an analog channel, Digital Audio cannot be selected,

1 Press MENU to access MAIN MENU screen..

2 Press OH ,&/_' to move the "O" mark to "DIGITAL AUDIO".

Press VOL +/- to access the DIGITAL AUDIO screen.

Press CH A/V' to select "Audio Service" or "Audio Preference", then press VOL +/- to access to the selected

mode.

[] AUDIO SERVICE

(i) Press OH A/V' to select the AUDIO SERVICE. Six kinds

of audio service are available to be selected. However, setectabte service are depands on the programs contains.

The services are toggles as shown on below:

123SLEEPTIMER (I;_VIBEOADJUST _AUDIO SELECT

O'L"_DIGITALAUDIO

_CLOSED CAPTION II_'IPARENTCONTROL

_ENERGY SAVE _SET UP

(MAIN MENU screen)

(DIGITAL AUDIO screen)

AUDIO SERVICE 1

If a program has three services, audio service toggles like below:

• AUDIO SERVICE: The type of audio transmitted in a digital broadcast signal,

o tn additional, it is possible for multiple audio tracks to accompany a signal video track.

AUDIO PREFERENCE

[]

(i) Press OH A/V to select "PRIMARY LANGUAGE" or

"SECONDARY LANGUAGE".

(ii) Press VOL +/- to change the setting,

PRIMARY LANGUAGE :ENGMSH

PRIMARY LANGUAGE

[_l ENGLISH!= iESPAilOLI= _ SECONDARY LANGUAGE

, The language which is selected in Primary Language will not appear in Secondary Language selection

mode

5 Press MENU to exit O

Page 18

How to set CLOSED CAPTION

o YourTV isequipped with an internal Closed Caption decoder "Closed

Caption" isa system which allows conversations, narration, and sound

effects in TV programs and home videos to appear as captions on the TV screen (see the illustration),

o Not all the programs and videos will offer closed captioning. Please

look for the "_]" symbol to ensure that captions will be shown,

. Closed Caption broadcast for Analog Channel can be viewed in

two modes: CAPTION and TEXT. For each mode, two channels are available, CH1 and CH2

Closed Caption broadcast for Digital Channel can be viewed in 10 modes (maximum),

The CAPTION mode shows subscripts of dialogs and commentaries of TV dramas and news programs while allowing clear view of the picture.,

The TEXT mode displays over the picture other various information

(such as TV program schedule, weather forecast, etc) that is independent of the TV programs

[] During viewing analog channel

(+y(-)

d_l_ I I [ CHANNELup(_,)l

tl [ V0WME

__ DOWN(V)

'_ MENU

t Press MENU to access the MAIN MENU screen+

2 Press CH ,_/V to move the "@" mark to "CLOSED CAPTION'L

3 Press VOL

+/- to access the CLOSED CAPTION setting

screen..

Press CH A/V to move the "_" mark to either "MODE" or

"DATA",

_ENU

_SLEEP TIMER E:_V_DEO AOJUST _AUD!O SELEC[ _DtGITAL AUOIO

g_I]_CLOSEO CAPTION

_PARENT CONTROL

•_4ENERGY SAVE _$ET UP

(MAIN MENU screen)

_CLOSED CAPT{ON

@_DE :CAPT10N

DATA :OH 1

3LOSEDCAPTIONsellingscreen)

_CLOSED CAPTION

MODE :CAPTION

eDATA :OH t

Press VOL +/- to change the CLOSED CAPTION setting,

MODE.:J-_ DATA:_! l _ _

6 Press MENU to exit,

'!8

_'!:CLOSED C_PTtON

O_OE :CAPTION

DATA :CH I

Page 19

[] During viewing digital channel

"_ Repeat steps 1 to 2 of During viewing analog channel

2 Press VOL +/- to access the CLOSED CAPTION screen_ 3 Press CH A/_F to select "CLOSED CAPTION SERVICE"

or "CLOSED CAPTION PREFERENCE" and then press VOL +/- to enter to the selected mode screen.

[] CLOSED CAPTION SERVICE

(i) Press CH A/_F to select"CLOSED CAPTION

SERVICE". Closed caption services toggles like below:

CLOSED CAPTION SERVICE

(CLOSED CAPTION screen)

SELECT SERVICE : OFF

(CLOSED CAPTION SERVICE scre_

FONT SIZE : DEFAULT

[] CLOSED CAPTION PREFERENCE

(i) Press CH ,&/V to select "FONT SIZE", "FONT

COLOR", "BACKGROUND COLOR" or "RESET 5.

(ii) Press VOL +/- to select desired setting.

The setting toggles as shown below:

FONT SIZE : OEFAULT

FONT SIZE

FONT COLOR/BACKGROUND COLOR

FONT COLOR :DEFAULT

RESET

, For resetting all adjustment items to the factory preset

values.

o Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor

or if there are problems at the broadcast source. This does not necessarily indicate a problem with your TV.

o If any button is pressed to call up the ON SCREEN DISPLAY while viewing a CLOSED CAPTION

broadcast, the closed captions will disappear momentarily

o If no TEXT broadcast is being received while viewing in the TEXT mode, the screen may become

dark and blank for some programs.. Should this occur, switch the Closed Caption mode to "OFF"

Page 20

[] V-CHIP

- ThisfunctionallowsyoutorestrictTVprogramsandalsoallowsyouto controlTVusagebasedon FCCdata,Thisfunctionistopreventyourchildrenfromwatchingviolenceorsexualscenesthatmay

beharmful,

o RestrictionofTVprogramsincludestwocharactersthatcontaininformationabouttheprogram'sMPAA

ratingandtheTVParentalGuidelines.MPAAisrestrictedbyage,TVParentalGuidelinesarerestricted byageandcontents.

- SinceaTV programmayuseeithertheMPAArating,TVguidelinesorcanadianRatingSystem,you shoutdadjustaHforcompletecontrol,

[1]MPAARATING

RATING

G PG

age

PG-13

based

R NC-!7

MPAA RATING Example 1:

"PG-I3" in the age-based rating is b_ocked, this will automatically block the higher ratings "R",

"NC-17", "X" also.

1. User setting

PG PG-13 BLOCK

R BLOCK i

NC-17 BLOCK

X BLOCK

GENERAL AUDIENCES, All a,.qesadmitted.

PARENTAL GUIDANCE SUGGESTED Some material may not be suitable for

children. PARENTS STRONGLY CAUTIONED Some material may be inappropriate for

children under 13, RESTRICTED. Under 17 requires accompanv!n.q parent or adult quardian.

NO ONE 17 AND UNDER ADMITTED. X Rating is an older rating that is unified with NC-17 but may be encoded on

cider movie's data

Example 2: "R" in the age-based rating is blocked, this will automatically block the higher rating "NC-17", "X"

also.,

1. User settin

G .....

PGq3 .....

R BLOCK

N0-17 BLOCK

K BLOCK

2, Block table

_ not to

I G block

I PG block

age PG43 block

based _ Select

not to

not tO

block auto-

block

auto.

block

. MPAA RATING is only age-based,

[2] TV PARENTAL GUIDELINES

conte

RATING

(Adult

Language)

TV-_ff children)

TV-Y___7.(Directto Older Children

•% i

LTV-G, (Gene,ralAudience_

age ! TV-PG (Parental Guidance

based I Suggested)

_/ t TV-14 (Parents Strongly

Cautioned)

_(Mature Audience Only)

[]

[] !

[]

[] I

[] 1

[]t

[]

[] : Content Rating can be set.

- " Content Rating cannot be set (not normally broadcast by TV station)

it ba sed__c::_

S V

(Sexual (Violence)

Situation)

[] []

@ @

[] []

(Fantasy

Violence)

Page 21

TV PARENTAL GUIDELINES (Example)

Exam_e 1,1 : Age Based setting

Clear L.VJs (block) from each "AGE" box for all ratings

This will automatically unblock everything

Example 1.2 : Age Based setting

For"TV-G" put a [] in the "AGE" box. This will automatically block the higher age ratings "TV-PG", "TV-14" and "TV-MA" as well as "TV-G"_ Please note the content ratings "D", "1" "S", "V" are automatically

blocked as welL

Example 2.1 : Content Based setting If you choose to unblock every content-based items ("D", "V.',"S", "V"),

clear the [] (block) from each "AGE" box of "TV-PG", "TV-14" and 'q'V-MA"..

Examrp_e 2.2 : Content Based setting Put a L_ inthe box corresponding to "TV-PG" (row) and "V (Violence)"

(column). This wilt automatically block the "V" boxes for "TV-14" and "TV-MA" Setting only '%V-PG-V", "TV-t4-V" or "TV-MA-V" will not block

all programs rated "TV-PG", "TV-14" or "TV-MA'.

AGE D L S V FV

TV-Y [] ..... _:VIEW

ITV-G

|TV-PG

ITV-14

eTV_A

_E_U:RETU_

AGE D L S V FV

TV-Y7 O _: BLOCK

'OTV-G

TV-PG

TV*I4 TV-MA

t,IENU:RETURN

AGE D L S V FV

TV-Y7 _ _:BLOCK TV-G

TV-PG

TV-I4

@TV-MA

ME/_U:RETURN

AGE D i S V FV

TV-Y7 _ _]:BLOCK ?V-G

TV-Y I El:vIEw

TV-I4

TV-_'{A

_,IEt_U:RETURN

Example 3 : Resetting an Age Based setting AQEDLSv FV

This wilt again automatically block the content ratings D, L_, S, "V"

For"TV-14",puta[] (block)inthe"AGE'bOXo TV-Y I -_--" C3:v,_',

for "TV-MA" as well as "TV-14" ("D" is not available for "TV-MA") oTV-_4

TV-Y7 O i.V]:BLOCR TV_PG

TV -'_A

Please note that the lower age rating "TV-PG" does not change from _AERU:RETURR its previous settings after this

o Content ratings can be modified but only in the combinations indicated by [_ in the table on page

- Changing a lower age rating's content setting to "BLOCK" automatically changes the same higher age rating's content setting to "BLOCK" regardless of their previous settings.

o Changing a lower rating's "AGE" setting to "BLOCK" automatically changes all higher ratings to

"BLOCK" regardless of their previous settings

° For"TV-Y7", "TV-PG", "TV-14" and "TV-MA", if you clear the [] in the "AGE" box (unb!ock) you can

still change settings based on content Clearing a higher rating's age or content setting will not clear lower settings Make sure that all

undesired boxes are blocked_

Page 22

[3] Canadian Rating Systems ° The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications

Commission (CRTC) policy on violence in television programming.

° While violence is the most important content element to be rated, the structure developed takes into

consideration other program content like language, nudity, sexuality and mature theme&

• When setting theV-CHIP on the Canadian system you can choose either the Canadian English ratings or the Canadian French ratings..

[i] Canadian English

Rating

C8+

Age PG

14+

18+

[ii] Canadian French

ratings

Description

Children: Intended for younge_:"children '_'nder the age of 8 years. Paysca.reful

attention to themes that could threaten their sense of security and well-being. Chii'dren over 8 years old: Contains no portrayai of violence' as the preferred,

acceptable, or only way to resolve conflict; nor encourage children to imitate dangerous acts which they may see on the screen.

General: Considered acce'p'{able for all age groups_ Appropriate viewing for the entire family, contains very little violence, physical, verbal or emotional.

Parental Guidance: In{ended for'a general audience, but may not be' suitaioie

for younger children (under the age of 8) because it could contain controversial themes or issues.

Over 14 Years: Could contain themes where violence is one of the dominant elements of the storyline, but it must be integral to the development of plot or

character. Language usage could be profane and nudity present within the context of the theme.

Adults: Intended for viewers I8 years and older and might contain depictions of violence, which while related to the development of plot, character or themes, are intended for adult viewing. Could contain graphic language and portrayals

of sex and nudity

ratings

Age

Rating

13+ 16+ 18+

Description

Ge_ral: All ages and children, contains minimal direct violence, but may be integrated into the plot in a humorous or unrealistic manner.

General but inadvisable for young children: May be viewed by a wide public audience, but could contain scenes disturbing to children under 8 who cannot distinguish between imaginary and real situations. Recommended for viewing

with parent. Over 13 years: Could contain frequent violent scenes and therefore recommended

for viewing with parent. Over 16 years: Could contain frequent violent scenes and intense violence. Over 18 years: Only for adult viewing.. Could contain frequent violent scenes

and extreme violence

Page 23

® H0w to set V-CHIP

[1] MPAA RATING

QQO OQO

OOQ

QQO

_Er_U

©--

(+ ]/(-)

CHANNEl

uP(_,)/

I VOLUME

DOWN('V

1 Press MENU to access the MAIN MENU screen.

Press CH AI_ to move the "0" mark to "PARENT CONTROU'.

3 Press VOL +/- to access the PARENT CONTROL screen

I_SLEEP TIMER

B:_VIDEO ADJUST _AUDIO SELECT F--_OIGITAL AUDIO I_J_CLOSEDCAPTION IZ21PARENTCONTROL _ENERGY SAVE

_SET UP

(MAIN MENU screen)

E_SLEEP TIMER _IDEO ADJUST EI_{AuD]O SELECT EDIGITAL AUDIO _I_CLOSED CAPTION

_PARENT CONTROL

E'r_IENERBYSAVE _SET UP

_PABENT CONTROL

OV-CHIP BLOCK

VIEW TIMER

PARENT CONTROL screen

4 Press VOL +1- to access the V-CHIP select screen.

- If SECRET No. is already set, enter the SECRET No (SeeTochangetheV-CHIP BLOCKafter _ _

registering a secret No. on page 27,).,

Press VOL +/- to select "MPAA". Press CH Ak/_' to move the"O"

mark to "PG", then press VOL +/- to select BLOCK. If you set "PG" to BLOCK, "PG-13", "R", "NC-17" and "X" are automatically

blocked.

6 Press MENU to return to the V_CHIP select screen_ @

OMPAA

TV GUIDELINES

Cdn English RBlings Cdn French R_{i_gs

STATUS :OFF

(V-CHIP select screen)

G : .....

ePG :BLOCK

PG-t3 :BLOCK R :BLOCK

NO-t7 :BLOCK

X :BLOCK

IAENU:BETURN

Page 24

7 PressMENU,then"INPUTSECRETNoo"willbedisplayed.

- IfSECRETNo.isalreadyset,skiptostep9

Enter a 4-digit SECRET No, using the REMOTE KEYPAD,

QQQ QQQ

Co©

9 When done, press MENU to exit. MENU

o If you set "G" to BLOCK, all ratings are automatically blocked. o If you set "X" to BLOCK, "G", "PG", "PG-13", "R" and "NC-17" are not blocked.

INPUT SECRET NO

[2] TV GUIDELINES 1 Repeat steps t to 4 of [1] MPAA RATING..

2 Press CH A/_' to move the "0" mark to "TV GUIDELINES".

Press VOL +/- to access the TV GUIDELINES screen.

To change AGE and CONTENT SETTING, press CH ,_/_' to move the "0" mark to the desired rating and then press VOL +/- to

select

Press CH A/_F to move the "0" mark to the desired content item

and then press VOL +/- to select either"BLOCK" or ....

(unblock)

MPAA

OTV GUIDELINES

Cdn English Ratings Cdn F{ench Ralings

STATUS :OFF

(V-CHIP select screen)

AGE D I S V FV

@TV-Y7 .... D _: BLOCK

TV-G TV_PG

TV-I 4

TV-MA

,_E?,tU :RETURR

q_,' GUIDELINES screer

TV-Y7

oAGE CLOCK

D .....

L .....

V .....

FV BLOCK

_,_ENU: BETUBN

CONTENT RATING screen

6 Press MENU to return to the TV GUIDELINES screen

7 Repeat steps 4 to 6 until all ratings and their contents are seL

8 When done, press MENU to return to V-CHIP select screen.

9 Press MENU to exit. MENU

. If SECRET No is not set, enter a SECRET No. as show in steps 7 and 8 of [1] MPAA RATING.

_!ENU:BETURN

Page 25

:ii :: : fC_nti n Ued}_ .... :

I Parent contro! (V-CHIP operatioh)........................................

,, ,, ,,, : :,.H,YH,_,Y=,,,_,_=:2,=::: ......

e How to set Canadian Rating System

Setting for Canadian English ratings and Canadian French ratings.

Repeat steps 1 to 4 of [1] MPAA RATING.

Press CH A/_' to move the "0" mark to "Cdn. English Ratings", then press VOL +/-

Press CH A/_ to move the "0" mark to "PG" then press VOL

+/- to select Block. If you set "PG" to block, "14 +" and "18 +"

are automatically blocked°

You can select "BLOCK" or .... (unblock) rating items by

pressing CH A/V and VOL +/- if you select"Cdn. French Ratings" in step 2. If you select"8 +" to BLOCK, "13 +", "16 +" and "18 +" are

automatically blocked.

MPAA TV GUIDELINES

OCd_ £ngtish Ra;ings

Cdn Flench Ral}ngs

_TATUS :0_

C8+ ......

G : .....

14+ :8LOC_ I_ :8LOCX

MENU:_ET_R_

6 ; .....

eli+ :BLOCK

t6+ ;BLOCK

18+ _BLOCK

Page 26

e Activating the V-CHIP BLOCK

Repeat steps 1 to 4 of [1] MPAA RATING.

Press CH _k/V" to move the "0" mark to "STATUS". Press VOL

+/- to activate the V-CHIP BLOCK. (tf STATUS is OFF, V-CHIP

BLOCK will not operate)

3 Press MENU, then "INPUT SECRET No,' will be displayed.

o If SECRET No. is already set, skip to step 5.

Enter a 4-digit secret No. using the REMOTE KEYPAD.

QOO QOQ

QQQ

Press MENU and the secret No_ will be registered_ @

MPAA TV GUIDELINES

CSn English RalinO_ Cd_ Fren¢_ Ralings

• STATUS :ON

(V-CHIP select screen)

tRPUT SECRET No

INPUT SECRET No

1_34

• To temporarily cancel the V-CHIP BLOCK

1 "V-CHIP HAS BEEN ACTIVATED" appears if you view a program

with the same program rating data you configured.

o "V-CHIP HAS BEEN ACTIVATED" will not be displayed if STATUS is

not configured to "ON",,

2 Press MENU, then "iNPUT SECRET No:' wilf be displayed.

Enter the 4-digit secret No.. using the REMOTE KEYPAD, then V-CHIP BLOCK will be canceled

temporarily, tf the wrong secret No. is chosen,

"SECRET No. IS INCORRECT" will be displayed. Input the secret No. again in this case.

QOO

QOO QOQ

V-CHIP HAS BEER ACTIVATED

TV-Y7

INPUT SECRET N_

INPUT SECRET _,_o

o If you turn the power ON from OFF, the V-CHIP BLOCK will be activated again,

Page 27

: Parent Contr01 (v-cHIP Operation) (continued) i_

eTo change the V-CHIP BLOCK after registering a secret No.

1 Repeat steps 1 to 4 of [1] MPAA RATING, then "INPUT SECRET

No." will be displayed

2 Enter the 4_digit secret No using the REMOTE KEYPAD and

the V-CHIP select screen will be displayed, Set V-CHIP BLOCK INPUTSECRET.o again.. Q Q Q ** ,,_._,

INPUT SECRET_t_

Q®® ®®®

® If you forget or need to change your secret No., clear the original secret No. and set

up a new one.

1 Repeat steps 1 to 4 of [1] MPAA RATING, or 1 to 2 of To

temporarily cancel the V-CHIP BLOCK, then "INPUT SECRET No," will be displayed

Press and hold both VOL + and OH A on theTV set simultaneously

until the message "INPUT SECRET No," disappears.

3 Press the MENU button twice to exit,

(On the Set)

- VOL + CH A

VOL ÷ and CHA

buttons

Page 28

[] VIEWTIMER

This function allows you to restrict TV viewing time and also allows you to control TV usage. This function is to prevent your children from watching too much TV,

VIEWING TIME (an accumulative timer: counts only the time duration while theTV power is on.)

- VIEWING TIME can be set from 30M (30 minutes) to 10H00M (10 hours) in 30 minutes intervals

OFFTIME (Restricts TV viewing after the VIEWING TIME reaches

zero,)

VIEW TtMF_

• OVtB*¢HfGTiME =-H --M

F--- OFF TIME

--STATUS :OFF

• OFF TIME can be set from 30M (30 minutes) to I OHOOM(10 "hours) in 30 minutes intervals,

STATUS (Select ON to activate VIEW TIMER)

How to set VIEW TIMER

Press MENU to access the MAIN MENU screen.

Press OH _/V' to move the "0" mark to "PARENT CONTROL'.

(1:_L%EEP TIMER B_V IDEO ADJUST _-----AUDI0 SELECT _OiGITAL AUDIO

_II_¢LOSEO CAPTION

ef_PARENT CONTROL

_ENERGY SAVE

_SET UP

(MAIN MENU screen)

3 Press VOL +/- to access the PARENT CONTROL screen,

4 Press OH ,_!V' to move the "O" mark to "VIEW TIMER".

5 Press VOL +/- to access "VIEW TIMER"o

Press CH ,&!V to select "VIEWING TIME" and "OFF TIME'L For each selection, press the VOL +/- to set the time duration.

Press CH A/_' to select "STATUS". Press the VOL +/- to turn

ON the "VIEW TIMER" (If STATUS is OFF, VIEW TIMER will not operate..)

(I_PARENT CONTROL

V-CHIP 8LODE

QVIEW TI_IER

PARENTCONTROL screen

VIEW TIMER

OV] SWING TIME

*-H --M

OFF TIME

_,TATUS :OFF

VIEW TIMER

V{EW_ HG T _I_E

2H OOM

QOPF TIME

--R --M

STATUS :OFF

V IEW T IMEB

VIEWING TiME

2N Q_M

OFF TIME

5N OOM

eSTATUS :ON

8 Press MENU,."INPUT SECRET No," will be displayed

otf SECRET No, is already set, skip to step 10

INPUT SECRETHe

Page 29

9 Enter a 4-digit secret No. using the REMOTE KEYPAD.

1 0 Press MENU to exit. Q O

QOO

QQQ

Example:

• To restrict anybody from watching TV for more than 5 hours, after watching the TV for 2 hours, your settings would fook like the one on

the right.

o You can choose to watch the 2 hours of TV as you wish° For example,

you could watch 1 hour of TV, turn the TV off for 30 minutes, then turn the TV on and watch [he remaining 1 hour of the VIEWING TIME.

e To change the VIEWTIMER setting after registering a secret No. 1 Repeat steps 1 to 4 of How to setVIEWTIMER Press VOL +/-,

and "INPUT SECRET No,!' will be displayed.

Enter the 4-digit secret No. using the REMOTE KEYPAD, and the VIEW TIMER access screen will

be displayed. Repeat steps 5, 6.

®®® ®®@ ®®®

VIEW T I_ER

VI_/IRG TIME

2H OOM

OFF TIME

SH 00M

eSTATUS :ON

INPUT SECRETNo

o When you choose the correct secret No.,, the VIEW TIMER access

screen is displayed If the wrong secret No, is chosen, "SECRET No, IS INCORRECT' is displayed Input the secret No again in this case.

To cancel the VIEW TIMER (While the TV set is OFF but the VIEW TIMER is set.)

Turn on the TV; a blue screen message 'q-IME OVER" witl appear, If you do nothing, the TV will turn off in approximately 30 seconds,

Enter the 4-digit secret No. using the REMOTE KEYPAD, When you choose the correct secret No.

the VIEWTIMER is canceled. If the wrong secret No. is Q _ O

chosen, "SECRET No. IS INCORRECT'is displayed O O Q Input the secret No again in this case

SECRET No IS INCORRECT

TIME OVER

IiIPUT SECRET _o

T I_,{EOVER

INPUT SECRET _Io

2,(

Page 30

arent Control (VIEW TIiVIER)(Continued)

e To cancel theVIEWTIMER setting or change the secret No. (if you

forget the SECRET No.)

1 Repeat steps 1 to 4 of How to set VIEW TIMER° Press

VOL +/-, and "INPUT SECRET No." will be displayed. _,PuTSEC,E_,o

Press and hold both VOL + and CH _kon the TVset simultaneously until the VIEW TIMER access screen is displayed. Now you can cancel the VIEW TIMER settings or change the secret No while "INPUT SECRET No." is displayed.

Notice of Remaining VIEWING TIME

o For every 30 minute interval, the remaining time will be displayed for 4

seconds, For the last 5 minutes, the remaining time will be displayed every minute,

° "0 REMAIN" will be displayed for 10 seconds just before the VIEWING

TIME expires,

(On the Set)

- VOL + CH h,

VOL 4- and CH_,

VIEWING TIME "j

OH 30M REMAIN J

V_EWtNG TIME

0 REMAIN

Page 31

[] SCREEN

This feature lets you lower the power consumption of your TV set which in turn saves you money and minimizes the impact on

the environmenL When this feature is turned on, it reduces the brightness of the TV to a level that consumes approximately 20 percent less energy than when the feature is turned off.

The reduction in brightness wilt be less noticeable under low room lighting conditions.

[] STANDBY

tf set to OFF: No power save during standby mode,

ON: With power save during standby mode. When

change your TV channel to a digital channel will take approximately 10 seconds to display.

VOLUME

(+Y(-)

CHANNEL UP(Ay

DOWN(v)

Press MENU to access the MAIN MENU screen.

Press CH ,_/'V to move the "0" mark to "ENERGY SAVE".

3 Press VOL +/- to access the ENERGY SAVE select screen..

Press CH A/V' to move the "0" mark to either "SCREEN" or "STANDBY"°

t_ENU

_SLEEP TIMER {I_IVIDEOADJUST _AUDIO SELECT E_OIGITAL AUDIO

_CLOSED CAPTION {iE_PABENTCONTROL

@_ENERGY SAVE

_ET UP

(MAIN MENU screen)

_ENEBGY SAVE

eSCREEN:OFF

STANDBY:ON

ENERGYSAVEselectscreen

_ENERGY SAVE

@SCREEN :OFF

STANDBY:ON

Press VOL +/- to select "ON" or"OFF".

SCREEN: STANDBY:

t 1 t l

Press MENU to exit.

_ENERGY SAVE

eSCREEN :ON

STANDBY:OFF

3'1

Page 32

[] EZ Setup

By operating the channel preset functions, you can preset your

TV to the desired channels for viewing°

CHANNEL

v UP(A)/

._,,, DOWN(V)

1 Press MENU to access the MAIN MENU screen,. 2 Press CH A./V" to move the "0" mark to "SET UP".

3 Press VOL +/- to access the SET UP screen, then press

CH A/V' to move the "0" mark to "CH SETTING"

4 Press VOL +/- to access the CH SETTING screen.

#ENU

f._JSLEEP TIMER

&_E[VIDEo ADJUST EE]AUDIO SELECT

_D_GITAL AUDIO _CLOSED CAPTION _-JPARENT CONTROL

_I_EN_RGY _AVE

_SET UP

(MAIN MENU screen)

BtUE SEB_B_ LAf_GVAGE

@CH _ETTING

AUTO INPUT _{R£EN FORMAT

(SET UP screen)

CH SETTJNG

@EZ £ETU?

AIR/ANALOG CABLE ANALOG CH SEARCH DIGITAL CH SEARCH

ANENNA SETUP-DIGITAL

(CH SETTING screen)

5 Press VOL +/- to access the EZ SETUP screen.

Press VOL +. (START)

The tuner will automatically search for the

broadcasting and cable TV channels for ANALOG° (The CH No@will automatically increase when it

appears.) (STOP)

Once tuning for analog AIR channel is finished, tuning for digital channel will start.

If you want to stop the EZ SETUP process once it has started, press VOL - and it will be

canceled.

To cancel EZ SETUP

Press VOL -.

CONNECT ANTENNA OR CABLE

START EZ SETUP!

@STOP START

(EZ SETUP screen)

(Analog channel tunning)

PLEASE WAIT

AUTO PRC_RALI_JNO

STOP @START

(Digital channel tunning)

PLEASE WA_T

AUTO PROGRM_;£11NG

DIGITAL 69

STOP @_TART

Page 33

7 Once EZ SETUP is complete, the lowest channel number

memorized will be displayed..

[] Channel Setting

If EZ SETUP does not memorize all the channels in your region, follow the instructions below to manually memorize the channel,

1 Press MENU to access the MAIN MENU screen..

2 Press CH ,&/V to move the "0" mark to "SET UP".

3 Press VOL +/- to access the SET UP screen.

4 Press CH ,&i_ to move the "O" mark to "CH SETTING".

5 Press VOL +I- to access the CH SETTING screen.

o If the viewing channel is an analog channel, Antenna

Setup Digital cannot be selected,.

. During Cable mode, Digital Channel Search, and

Antenna Setup Digital cannot be selected,,

P,_ENU

BE}SLEEPTIMER {];_VtDEOADJUST

EE_UDI0 SELECT _DIG_TAL AUDIO _CLOBED CAPTION i_5]PARENTCONTROL

_ENERGY SAVE

e_SET UP

(MAIN MENU screen)

[_S_T UP

BLUE SCREEN LANGUAGE

OCN SETTING

AUTO IflPUT _CR_EN FO_AT

.(SET UP screen)

(H _ETT_NG

OEZ _ETUP

AI_I ANALOG (ABLE ANALOG CH SEARCH DIG_TAL C_ SEARCH

CH MBMOR_ ANTENNA SETUP-DIGITAL

(CH SETTING screen)

Press CH AtV to move the "0" mark to "AIR/ANALOG CABLE",

then press VOL +/- to access the AIR/CABLE screen.

Press CH AI_' to move the "0" mark to the desired mode.

[_[_ = ICABLESTDI=I CABLEHRCl= [CABLEIRCI_---I

8 Press MENU to exiL

. Receivable channels of your TV set are:

AIR channels:

CABLE channels:

VHF: 2 through 13

UHF: 14 through 69.

CF_5ETTIt_O

EZ SETUP

OAIRIANALOG CABL_

ANALOG CN _EARCN DIGITAL 04 SEAnEH (H t,E_0RY

ANTENNA SETOP-DIGHAL

A IRt ANALOG CABLE

AIR CABLE STD

OCABLE HRC

tCABLE IRC

(AIR/CABLE screen)

1 (HRC and IRC mode only)

2 through 125 (STD, HRC and IRC)

Page 34

[] ANALOG CH SEARCH

Saving ANALOG broadcast TV channels into memory

Repeat step 1 to step 5 of Channel Setting. (See page 33) Press CH A/'_ to move the "0" mark to

"ANALOG CH SEARCH",

2 Press VOL +/- to access the ANALOG CH

SEARCH screen,,

To start:

(START)

Press VOL +. The tuner witl search through all available channels in your area and add them into the TV memory.

(STOP)

To stop:

Press VOL -. CH SEARCH will stop at the

current channel and will not add any higher

channels°

3 Press MENU to exit,, O

CH SETTING

_Z SETUP

AIRI ANAtOG CABLE

@ANALOG CH SEARCH

BIGITAL CH SEARZH CH t_P_RY ANTENNA S6TUP-DIGITAL

(CH SETTING screen)

CH SEARCH

AIR tO

eSTOP START

(CH SEARCH screen)

', if you press VOL + again while in the CH SEARCH mode, auto-program will start again, and the

previously memorized channeis will be lost.

[] DIGITAL CH SEARCH

Saving DIGITAL broadcast TV channels into memory

Repeat step 1 to step 5 of Channel Setting, (See page 33) Press CH A/_ to move the"O" mark to"DIGtTAL

CH SEARCH".

CN SET;ING

EZ SETUP

AIRIAHALOG CABLE ANALOG O_ SEARCH

@DIGITAL Ol SEARCH

ANTENNA SETUP-OI61TAL

(CH SETTING screen)

2 PressVOL +/- to access the DtGITAL

CH SEARCH screen.

To start:

(START)

CH S_kRCH

OIG_TAL 10

eSTOP START

Press VOL +. The tuner will search through all available channels in your area and add them

(CH SEARCH screen)

into the TV memory_

To stop:

(STOP)

Press VOL -, CH SEARCH will stop at the current channel and will not add any higher

channels.

3 Press MENU to exit°

Page 35

CH MEMORY Adding weak or additional channels or erasing unwanted channels from TV memory

Repeat step I to step 5 of Channel Setting, (See page 33) Press CH A/V to move the "0" mark to "CH

MEMORY'L

Press VOL +/- to access the CH MEMORY

screen,

Use CH A/V to select each desired channel to

add or erase,

Press VOL + to add a channel to theTV memory or press VOL - to erase a channel from the TV

memory.

VOL +

c._,._o,Y To add channel 10 to

A,_. the TV memory

CH M_BY

AIR I0

ERA_ e_C._

VOL -

'CR MEMORYunmemo-

rizedchannel)

To erase channel 10 from

the TV memory

(CH MEMORYmemo-

rizedchannel)

[H SETTING

EZ SETVP

A_Rt A_ALOG CABtE ARALOG [H S_ARCH DIG*TAL CH S_ARCH

eC_t _Et,_ORY

AtlT_tiA SETU_-DIGITAL

(CH SETTING screen)

GH _E_IORY

AIR _R

@ERASE ADD

(CH MEMORY screen)

5 Press MENU to exit.

Page 36

BLUE SCREEN

[]

Automatically turns the screen blue if a broadcast signal is not

received. After 15 minutes of non-reception, the TV will turn off

automatically,

(_ (D @ - VOLUME

_®Q (+)/(-) O®Q

up (A)/

r CHANNEL

_ENU

DOWN(V)

1 Press MENU to access the MAIN MENU screen,

2 Press OH A/'V to move the "0" mark to "SET UP",

MENU _LEEP TIllER

t_VlDEO ADJUST

_AUDIO SELECT

EE_DIGITAL AUDIO

i_CLOSEDCAPTION

_PARENT 03NTROL

[_EN6RGY_AVE

_SET UP

(MAIN MENU screen)

3 Press VOL +/- to access the SET UP screen. _ET UP

OBLUE SCREEN

LAfTGUAGE CH SETTft_G AUTO It_PUT

SCREEN FORe'AT

(SET UP screen)

4 Press VOL +/- to access the BLUE SCREEN select screen,

BLUE SCREEN:OEF

BLUE SCREENselect screen

5 Press VOL +/- to select"ON",

BLUE SCfIEEN:ON

6 Press MENU to exiL @

When the BLUE SCREEN is set to "ON"

Power turns off

No signal Blue screen

after 15 minutes

automatically

Standby mode

- Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function despite the presence of a broadcast signal.. To continue watching TV under these conditions, switch

the BLUE SCREEN "OFF".

o While INPUT 1, 2, or 3 (COMPONENT) is selected, the BLUE SCREEN will not be shown even if

BLUE SCREEN is turned on.

Page 37

The unit is preset to switch to the INPUT 2 screen automatically

when VIDEO equipment is connected to the INPUT 2 terminal. Do

the following to switch this feature off:

G iFvoluME(+ )/(- )

CHANNEL

uP CA)/

DOWN(v/

_ MENU

1 Press MENU to access the MAIN MENU screen,

2 Press CH AIr to move the "0" mark to"SET UP",

Press VOL +/- to access the SET UP screen, then press CH

_,/V' to move the "0" mark to "AUTO INPUT"°

Press VOL +/- to access the AUTO INPUT select screen Press VOL +/- to select"AUTOL

_SLEEP TIMER _]VIOEO ADJUST

E]AUDIO SELECT _D_G]TAL AUDIO

_;_CLOSED CAPTION

[_SIPARENT CONT£OL _ENERGY SAVE

_SET UP

(MAIN MENU screen)

Z_)BET UP

BLUE SCBEEN

LANGUAGE

CH SETTING

eAUTO INPUT

SCBEENFORMmT

(SET UP screen)

AUTO I_PUT;AUTO

{INPUT2)

(AUTOINPUTselectscreen

You may turn off "AUTO INPUT" when it is not in use,, Press VOL +/- to select "OFF",

6 Press MENU to exit, 0

AUTO }NPUT:OFF

(INPUT2)

Page 38

The format of the picture can be adjusted to either of the three screen formats.

(This function allows you to view 16:9 pictures recorded on DVD or by camcorders that are once saved using the 4:3 aspect ratio

to be played back in the original high-density 16:9 format,)

1 Press MENU to access the MAIN MENU screen.

Press CH ,&/v to move the "_" mark to "SET UP'L

Press VOL +1- to access the SET UP screen, then press CH ,_ki_" to move the "_" mark to "SCREEN FORMAT".

_ C_"........_'_"",f::_::bl!t _ VOLUME

O O J!! UP(_,)/

t I bow.(,)

_ _o _f I

L _ MENU

E_SLEEPT I_,tER _V IDEO ADJUST

F'_--.kUDI0 SELECT _OIGiTAL AUDIO

_::_CLOSEDCAPTION _PABENT CONTFIOL

E_Et4ERGYSAVE

@[_SETUP

(MAIN MENU screen)

_5ET UP

BLUE SCBEEN LANGUAGE CH SETTJHG AUTO iNPUT

eSD_EE_IFORMAT

(SET UP screen)

4 Press VOL +/- to access the SCREEN FORMAT select screen_

° Ifthe viewing channel is an analog channel, INPUT t,

INPUT 2 and INPUT 3, STRETCH cannot be selected, v_oLt IvoL_

5 Press OH A/_' to select"STRETCH", "4:3" or "16:9".

SCBEEN I:O_,(AT

STRETCH

e4:3

;6:g

SCREENFORMATselec_screen

_CSEEMFORMAT

STBETCH

e4:3

f6;g

Page 39

6 PressMENUo exit,

• The STRETCH and 16:9 screen format will be cancelled when the power is turned off,

While format of signal received

OOoO

Fu[t 16:9

Side panel 16:9

Mode set to STRETCH

Mode set to 4:3 Mode set to 16:9

o 0

Letter Box 4:3

• The STRETCH and 16:9 screen format will be cancelled when the AC power cord is unplug

• If STRETCH mode is selected, the quality of picture might be poo_

• This function can be selected independently among AIR/CABLE, INPUT 1, INPUT 2, INPUT 3 (COMPONENT) and Digital Channel,

Page 40

e Connecting video equipment for playback of video material

. To view video material from external video equipment, make sure to connect the equipment properly

Connecting video device equipped with video output terminals

VIDEO EQUIPMENT

(Front connection terminals of TV)

Pull open the front door

ICAMCORD R1

To AUDIO OUTPUT (L} To AUDIO OUTPUT (L)

To AUD{O OUTPUT (R)

ITV GAME]

YeIIow: To video input terminal White : To audio input (L) terminal

Red : To audio input (R) terrnina_

(Rear connection terminals of TV)

To VIDEO OUTPUT

To AUDIO OUTPUT (L)

To AUDIO OUTPUT (R)

• To AUDIO OUTPUT (L) To VIDEO OUTPUT

Page 41

Notes:

• COMPONENT terminals are DVD compatible, allows you to enjoy the highest quality playback image than the image from IN I S-VtDEO terminal.

- The IN 1 S-VIDEO terminal is used to obtain a higher quality image by importing image signals

o The S-VIDEO terminal is for the video image only.To receive an audio signal, connect the audio

cable to the IN 1 AUDIO terminals (left and right),

(Rear connectionterminals of TV)

out ..........

43 :::::

"f:' .H -IJ t

TO S-VIDEO OUTPUT i ,..

(When your video I

equipment has an !

S-VIDEO output terminat )

"*, To VIDEO OUTPUT

_To AUDIO OUTPUT (L

To AUD!O OUTPUT (R

To AUDIO VIDEO OUTPUT OUTPUT (L/R) _ Y_ Terminals

Video Equipmentwith Component video(Component Color)

OutputTerminals(Y, PBand PR)

To watch video material playback

. Press the Remote's INPUT button to select the VIDEO INPUT mode for the video equipment you

wish to play.

° The external VIDEO INPUT mode wiil change as follows each time the INPUT button is pressed..

AIR --_ INPUT1(IN1) -_ fNPUT20N2) -'_ INPUT3 (COMPONENT)(IN3) --]

CABLE Rear Front Rear

• When the AV cables are connected to the VIDEO INPUT 3 and COMPONENT Y, PBand PR terminals simultaneously, the COMPONENT terminal has priority over the VIDEO terminal

• INPUT mode can be selected by pressing either the CH _k on the TV remote control when the TV is set to the highest channel stored in memory, or by pressing the CH _' when it is set to the Lowest

channel.

o When connecting video or audio equipment to the television, be sure that the power is turned off in

order to prevent damage to either the television or the equipment being connected,

o The S-Video terminal has priority over the VlDEO terminaI (IN 1) ,When you wish to use video equipment

connected to the VIDEO terminal (IN 1), unplug equipment connected to the S-VIDEO terminal

• For detailed information on the connection and use of auxiliary equipment, refer to the instruction manuals of the equipment being used.

• The connection cables/cords can be obtained from your local video store

Page 42

e These terminals are used for connecting an external audio amplifier.The STEREO/MONO/SAE

VOLUME, MUTE and FAO functions can all be controlled via the television's remote control or directly on theTV itselfoThese terminals relay the audio signal of all programs being displayed

on theTV screen.

(AUDIO OUTPUT terminals are located on the rear of the cabinet.)

(Rear connection terminals of TV)

: :: : : := :

i i.i.Ull,U,,,, ui , __

To the audio input terminals

I Stereo Amplifier .] Speaker System

(1) Before connecting the cables, turn on the TV and adjust the TV volume for a moderate listening

level.

(2) Turn off the TV and connect the audio cables to the AUDIO LINE OUTPUT terminals on the TV (3) Turn the TV set and stereo amplifier on.

(4) if you desire, you can turn off the sound of the TV's internal speakers by accessing the TV's AUDIO

SELECT screen. See pages 15, 16. (5) Adjust the volume control on the stereo amplifier to a moderate listening level (6) Control of the audio can be adjusted using the audio controls (STEREO/MONO/SAP, VOLUME,

MUTE and FAO), from either the remote control, or directly from the TV seL

o For detailed information on the connection and use of auxiliary equipment, refer to the operation

manuals of the equipment being used

. When connecting monaural equipment to the AUDIO INPUT or OUTPUT of this set, use an audio

connection cord and plug adaptor as shown below.

, When FAO is set to "OFF", we recommend you to keep the TV's audio output level high for optimal

sound quality. (see page 15.)

Pl_g adapter

To the TV _ _ being connected

,=,,,_.To the equipment

Pin plug x 2

Pin Plug Pin jack/Mini plug

Page 43

Check these items and see if you can correct the trouble with a slight adjustment of the controls

o -_ o=

QUICK SERVICE

iit

CHECK LIST

POSSIBLE REMEDY

Try a new channel,if OK,thenthere is a possiblestation trouble.

tsTVplugged in? Powerat outtet? IsTV's POWERbutton on?

ls antennaconnectedtoterminal on

the backof theset?

Ifoutside antennaisbeing used,

checkfor brokenwire_ Checkfor local interferenceorexternal

electricalnoise X X Turnoff thePOWERand thenturn it

on after about a minute. Adjust COLORcontrol X

Adjust PICTUREcontrol. X X CheckexternalVideo/Audioproducts:

iookfor loose/brokenconnection X X X X X leads (Referto pages40-42)

Checkbatteriesof RemoteControl X I Slide CATV/DVD-TV/VCRSelect Switchto TV position.

Are audiocables connectedfirmly? X Checkthe volumelevel.

Is SPEAKERON? See pages15,16 X, .

ChangeClosedCaptionmode to X "OFF"/EnergySavemodeto "OFF".

_.t m

"6 I°_o _ g o= _ = co o_

I:L

._ °_ _ _i _ = if.

i o_ c _ Oi 0 = _ _ = =

o× °

ZO_ ZLLI %0 oo -._

.-g g,,,-=o<

X X X X X X X X X X X

x x ix

X X

X X X X X X

x x x x x x x xix x x

X XX X X X

Unplugthe TVand plug it inagain X X X X X X X XiX X X

after 2 minutes or longer

o If no TEXT broadcast is being received while viewing in the TEXT

mode, the screen may become dark and blank for some programs, Should this occur, switch the Closed Caption mode to "OFF",,

(Dark and Blank Picture)

For location of the nearest Sharp Authorized Servicer, or to obtain product literature accessories, supplies, or customer assistance, please call 1-800-BE-SHARR

Page 44

[] The warning message about reception of digital broadcast

The example of an warning

message disPlayed on a screen

- Faiied to receive broadcast,

° No broadcast now,

MODEL

Receivincl ,System

Stereo Broadcast ...............

Reception Channels

AIR

CATV Digital Terrestrial

Broadcast {'8 VSB)

Channel Tunin,q .........

Antenna Input Impedance Screen Size

Terminals

.... Sound Q#tput ...................

Power Source Power Consumption

Dimensions

[(W) x (H) x (D)] mm .......

WeiqhL_approx.)

o Design and specifications are subject to change without notice,

VHF UHF

American TV,,standard,ATSC/NTSC system

2-13 ch

1-125 ch 2-69 ch

181-channel Reception P.LL tuninq sys.tem

VHFiUHF 75 ohrn. U.nbalanced

32""Diaqonally Measured ................

Audio/Video input x 3 (Front x 1, Rear x 2) S-Video input x I (Rear)

COMPONENT x 1 (Rear)

Audio output x 1 (Rear)

....A,ntenna X,,1,(Rear)

3 W (RMS) x 2

AC 120 V__6_60Hz

t55 W

297/8"(W) X 264%4" (H) x 213/_""(D)

759 mm (W) x 680 mm (H) x 543 mm (D)]

112.4 Ibs. (51 kg)

, Check the antenna cable Check that the antenna iscorrectly

antenna setup.

- Check the broadcast time in the program guide°

32SC26B

MTS/SAP

14-69 ch

Possible Solution

Page 45

(ESPANOL)

Lea estas instrucciones cuidadosamente y cons_rvelas a la mano para consultadas en et futuro.

IMPORTANTE

Sfrvase anotar el modelo del televisor y los ntJmeros de serie en el espacio provisto, para ayudar a reportar en caso

de p@dida o robo, Los numeros est&n ubieados en la parte posterior del televisor

Existen dos razones importantes para registrar dentro del plazo tfmite la garantia de su nuevo televisor SHARP, mediante la TARJETA DE REGISTRO incluida con el aparato.,

PRIMERA - GARANTIA Garantiza al cliente tarecepci6n inmediata de todas las prestaciones de consumidor en cuanto a piezas, servicio

t6cnico y mano de obra aplicabie a su adquisici6n SEGUNDA - ACTA DE SEGURIDAD DE PRODUCTOS DE CONSUMIDOR

Con el fin de garantizar al cliente la recepci6n puntual de cualquier notificaci6n de seguridad sobre inspecci6n,

modificaci6n o cancelaci6n que se le pueda solicitar a SHARP bajo el Acta de seguridad de productos de

consumidor de 1972, LEA CUIDADOSAMENTE LA CL,_,USULA "GARANTfA L1MITADA" DE LA 0LTIMA

_,_,GINA

N ° de modelo :

N ° de serie :

ADVERTENCBA :PARA REDUCIR EL RIESGO DE INCENDIO O DESCARGA

ELI_CTRICA, NO EXPONGA ESTE APARATO A LA HUIVlEDADo

El rel&mpago con cabeza de

flecha dentro de un triangulo trata de indicar al usuario que las partes

dentro de! producto representan riesgo de electrochoque para las

personas

PRECAUClON : PARA REDUCIR EL RtESGO DE

DESCARGAS ELF-CTRICAS, NO RETIRE LA CUBIERTA

(Nt EL PANEL POSTERIOR)

NO CONTIENE PIEZAS REPARABLES POR EL

USUARIO,

SOLICITE AStSTENCIA TECNICA A PERSONAL DE

SERVfCIO TECNICO ESPECIALIZADO.

"Nota para et instalador del sistema de TV por cable: Esta nota tiene el prop6sito de Ifamar la atenci6n del instalador del sistema de cable acerca del Arficuto 820-40 del C6digo Electrico Nacional, que contiene las

directrices para ta puesta a tierra y, en particular, especifica que el cable de puesta a tierra debe estar conectado al sistema de puesta a tierra det edificio 1om_s cerca a la entrada del cable'

ADVERTENClA - Las Normas de la FCC establecen que cualquier cambio o modificaci6n no autorizada que se realice en este equipo y que no est6 expresamente aprobado por el fabricante podda anutar la

autoridad del usuario para utilizar este equipo,

DESECHO DEL PRODUCTO

Este producto utiliza un Tubo de rayos cat6dicos (TRC) que contiene soldadura de estaSo y plomoo El desecho de estos materiales deber4 set considerando regulaciones ambientales, Para obtener

informaci6n sobre el desecho o el reciclado, p6ngase en contacto con las autoridades locales o con Electronics Industries Alliance: www eiaeorg

Et signo de exclamaci6n dentro de un tri_ngulo trata de indicar al usuario que las instrucciones importantes de operaci6n y

servicio se encuentran en los documentos con el aparato

Page 46

PRECAUCI(3N:

o No coloque el cable de alimentaci6n de CA debajo dei televisor u otro elemento pesado , Paraimpedir un incendio,no ponga nunca ningun tipo de vela o tlama al descubierto encima o cerca del

televisor

• Para impedir un incend[oo una descarga er6ctrica, no exponga este aparato al goteo ni alas sa]picaduras Tampoco deber&n ponerse encima de los productos objetos llenos de Ifquidos como, por ejemplo,

PRECAUCg6N " - •

su televisor, y gu_rdelas para poder utilizarlas en el futuro. La energia el_ctrica permite realizar muchas funciones L_tiles;Este aparato ha sido diseSado y fabricado para

garantizar su segu.ridad fisica Sin embargo, UNA UTILIZACION tNAPROPIADA PODRIA SER LA CAUSA DE DESCARGAS ELECTRICAS O INCENDIOS Para mantener el buen funcionamiento de este equipo y evitar

problemas, siga las normas b&sicas indicadas a continuaci6n cuando !o instale, utilice o repare. 1 Desenchufe et televisor del tomacorriente antes de limpiarlo.

2. No utilice tfquidos ni aerosoles de limpieza Para limpiar el televisor utilice un paso htJmedo 3 No utilice accesorios que no los recomiende e! fabricante det televisor porque podrian causar peligros.

4 No utilice et televisor cerca det agua - por ejempto, cerca de una baRera, lavado, fregadero o lavadora,

en un s6tano hL_medo,cerca de una piscina, etc

5 No utitice este televisor sobre un carrito, un soporte o una mesa inestables El televisor podrfa caerse

causando serias heridas a niRos o adultos, y, por supuesto, el aparato se estropearfa Ponga el televisor solamente sobre un carrito o soporte recomendado por el fabricante, o vendido junto con el televisor.

6 La combinaci6n de carrito y televisor debe moverse con mucho cuidado Las paradas

r&pidas, la fuerza excesiva y las superficies irregulares pueden ser la causa de que la

combinaci6n de televisor y carrito se volteen.

7 Cuando instale el televisor en una pared o en una estanterfa siga las instrucciones del

fabricante, y utilice el kit de montaje aprobado po_ el fabricante

8 Las ranuras y aberturas de la caja y del panel posterior o inferior sirven para la ventilaci6n

del aparato, para que 6ste funcione bien y para evitar que se caliente. Estas aberturas no deben taparse nunca..Este televisor no debe cotocarse en un lugar cerrado (como

un estante para libros) si _ste no dispone de la ventilaci6n apropiada

g Las aberturas no deben taparse nunca con un paso u otto material; y las aberturas del panel inferior no

deben taparse tampoco colocando el televisor sobre una cama, sof_, alfombra u otra superficie similar. Este televisor no debe ponerse nunca cerca o encima de un radiador u otro aparato que produzca calor

10 Este televisor s61odebe funcionar con la fuenie de corriente indicada en la etiqueta del fabficante Si no

est,_seguro acerca del tipo de corriente de su hogar, p6ngase en contacto con el concesionario de quien adquiri6 el televisor o con la compa5[a et_ctrica local

En el caso de equipos de televisi6n diseSados para funcionar con baterias, consulte las instrucciones de uso

11 Como medida de seguridad, el equipo de televisi6n estA equipado con un enchufe polarizado de dos

hilos. El enchufe polarizado de dos hilos solamente calza de una sola manera en el tomacorriente Si el enchufe no entra en el tomacorriente, pidale a un electricista que le coloque un tomacorriente nuevo.

No modifique el enchufe porque anular__esta caracteristica de seguridad

12 No permita que se apoye nada sobre el cable de alimentaci6n No ponga este televisor donde el cable

pueda ser deformado por personas que cam!hen sobre 6I

=Lea pot favor todas estas mstrucc_ones antes de porter en funcionamiento

Page 47

Cumpla con todos los avisos y las instrucciones marcados en el telev[sor

14,

Si se conecta una antena exterior al televisor, asegurese de que el sistema de antena est_ conectado a tterra para obtener cierta protecci6n ante los aumentos de voltaje y la acumulaci6n de cargas est&ticas

La secci6n 810 del Codigo EI6ctrico Nacional ofrece informaci6n relacionada con la conexi6n a tierra cerrecta del poste y la estructura de apoyo, la conexi6n a tierra del cable de entrada a una unidad de

descarga, el tamafio de los conductores de conexi6n a tierra, la ubicaci6n de la unidad de descarga de antena, la conexi6n a los etectrodos de conexi6n a tierra, y los requisitos para e! electrode de conexi6n

a tierra

EJEMPLO DE CONEXION ATIERRA DE LAANTENA

SEGON EL CC)DIGO ELECTRiCO NACIONAL

-_,,..,,,j-_ CABLE DE ENTRADA

//A/BRABR_ADEnADE_//_ "N\

DE ANTENA

_" CONEXlONATIERRA_%.._,._ 1%

_--..,_.......__/ _ _ UNIDAD DE DESCARGA DE ANTENA

i E°u'P°°E i ..q ,.ECS CC,ON01020,

I sgRvlcIo L_ I

L._ELECTRICO _ q //_ CONDUCTORES DE CONEXION ATtERRA

_. _ (NEC SECClON 810-2t)

NEC--CODtGO ELECTRICO NACIONAL (NEC ART 280. APARTADO H)

I5. Para proteger a_Jnmb.seste televisor durante tormentas el6ctricas o cuando se deje sin atender y sin utilizar

durante largos periodos de tiempo, desenchufe el cable de alimentaci6n del tomacerriente y desconecte la antena Esto evitar_, que ei aparato pueda estropearse debido a los rel&mpagos y la sobretensi6n en

la linea de a[imentaci6n.

16 Un sistema de antena exterior no debe ubicarse cerca de lineas de aiimentaci6n elevadas, ni cerca de

iuces el6ctricas o circuitos de alimentaci6n Tampoco debe ubicarse dende pueda caer sobre tales lineas o circuitos de alimentaci6n. Cuando instate unsistema de antena exterior, tenga muchfsimo cuidado para

no tocar las lineas o circuitos de alimentaci6n porque el contacto podrfa causar un accidente mortal.

17 No sobrecargue los tomacorrientes ni los cables de extensi6n porque esto podria causar un incendio o

descarga el6ctrica.

18 No meta nunca ning_Jnobjeto en e! interior del televisor porque podr[a tocar piezas con alta tensi6n o

causar un cortocircuito con otras piezas causando un incendio o descarga et6ctrica. No derrame nunca ningt_n tipo de h'quido sobre el televisor

19. Notrate de reparar eltelevisor usted mismo porque al abrir oquitar lastapas podda exponerse a una descarga de tensi6n u otros peligros Las reparaciones debe realizaflas el personal de servicio CALIFlCADO

20. Desenchufe este televisor del tomacorriente y solicite el servicio de un t_cnico calificado cuando se produzcan fas condiciones siguientes:

A Cuando el cable de la alimentaci6n o el enchufe est6n estropeados B Cuando haya derramado un ffquido sobre el televisor. C Si el televisor ha quedado expuesto a la Iluvia o al agua.

D Si el televisor no funciona normafmente siguiendo las instrucciones de utilizaei6n. Ajuste solamente

los controles indicados en Ias instrucciones de utitizaci6n. Un ajuste inadecuado de otros controles podrfa estropear el aparato y, entonces, ser[a necesario acudir a un t_cnico CAL1FICADO para que

6ste Io repare y io devuefva a su condicidn normal E Si el televisor se ha ca[do o la caja se ha estropeado. E Cuando las prestaciones del televisor cambien considerablemente serb,necesario ilamar a! servicio

de reparaciones.

21 AI finalizar cualquier servicio o reparaci6n de este televisor, pida al t6cnico de servicio que realice

comprobaciones de seguridad rutinarias para determinar si el televisor puede funcionar sin causar ningOn problema.

22. Cuando sea necesario cambiar piezas, cerci6rese de que el t6cnico de servicio utiliza las piezas de CAMBIO especificadas pot el fabricante, aquellas que tengan las rnismas caracterl'sticas que las piezas originaies Las piezas de recambio no autorizadas pueden causar incendios, descargas el_ctricas u otros peligros

_ ABRAZADERAS DE CONEXtON ATtERRA

=- SISTEMA DE CONEXION ATtERRA

DEL ELECTRODO DE SERVtClO EL¢'CTRICO

Page 48

Nombres de los componentes

(ESPAf, OL)

Pulsando _ Enciende (On) Pulsando nuevamente -_

ALIMENTAClON (POWER) --]__

Apaga (Off)

SENSOR DE CONTROL REMOTE --_

MENU (MENU) Pu]sando -_ Accede al MENU

PRINCIPAL Puisando nuevamente -> Sale deI MENU PRINCIPAL

ALIMENTAC|ON (POWER)

Pulsando _ Enciende (On) Pu{sando nuevamente -_ Apaga (Off)

TECLADO A DISTANCIA (REMOTE KEYPAD)

Para tener acceso a cualquier canal empleando fas teclas

RETORNO AL CANAL ANTERIOR (FLASHBACK)

Para volver a{ canal anterior AUMENTOtDISMINUClON DEL --

VOLUMEN (VOLUME UPfDOWN) (+) Aumen_a e_son{do ( - ) Disminuye e! sonido

- Cambia o selecciona los ajustes de TV en la visuatizaciSn en pantalla

SILENCIAMIENTO (MUTE) Pulsando _ Silencia el sonido Pu{sando nuevamente -4. Restaura el

sonido

• Cuando se silencia el sonido, CLOSED CAPTION aparece si se encuentra dis-

ponible

AUMENTO/DISMINUClON DEL VOLUMEN (VOL)

(+) Aumenla el sonido. (-) Disminuye et sonido

-- Terminal _ (vldeolaudio)

CANAL SUPERIORtlNFERIOR (,&) Selecciona el siguiente canal

superior

('V) Selecciona el siguiente canai

infedor

Venlanilta del transmisor de infrarrojos

ENTRADA (INPUT) Pulsando .._ Cambia al modo de entrada I

det video externo

Pulsando 2 veces -+ Cambia at modo de

entrada 2 del video externo Pulsando 3 veces .-+ Vuelve al modo TV

original Consu_te la p&g[na 41 fNTRODUCIR (ENTER)

5e ut[tiza en algunos casos en loscuales

una Caja de tnversor de Cable requiere una arden "enter" despu_s de selecc[onar

los canales, al usar el teclado adistancia

• Utilizar pata confirmar la selecci6n de canal CANAL SUPERIOR/INFERIOR

(C HANNEL UPtDOWN) (A) SeIecclona eI siguiente canal superior

(V) Selecciona el siguiente canat inferior

• Consulte las p_ginas 33-34 para obtener informaci6n sabre el preajuste de canales

PREPARACION (MENU) Pulsando -_ Accede al MENU

PRINCIPAL Puisando nuevamente -_ Sale del

MENU PRINCIPAL

VISUALIZAClON (DISPLAY)

Pulsando _ Aparece el canal de recepci0n por cuatro segundos. Pulsando nuevamente _ Elimina la

visualizaci6n

• En el modo de "Closed Caption" se muestra el canal de recepci6n pot un

corto tiempo

Page 49

Pruebeconottocanalysitodoest& bien,etproblemapuedeserdela

emisora,

Est_conectadoeltelevisor? Llega

electricidadaltomacorrientes? Est_conectadoelinterruptordel

televisor? Est&conectadolaantenaalterminaldel

panelposteriordeltelevisor? Siutilizaunaantenaexterior,cerci6rese

dequeelcablenoest6daSado. Compruebesihayinterferencialocal.

DesconecteelinterruptorPOWER yvueivaaconectar!odespu_sde

transcurrirunminuto.

AjusteelcontroldeCOLOR. AjusteelcontroldeMATtZ

-Verifiquelos'"productosextemosde Video/Audio,revisesihayfugasde

conexionessueltasorotas Compruebeelestadodelaspilasdel

mandoadistancia, DeslieeCATWDVD-TVNCRselectorpara

situarlosobretaposici6nTV Estanbien€onectadosloscablesde

sonido?Compruebeel niveldel votumen Est_eonectadoel altavoz?

Desactive(OFF) el modoCLOSED

CAPTION1Desactive(OFF)el modo Ahorro de Energ[a (Energy Save).

Desenchufeel televisory vuefvaa

enchufarlodespu_sde dosminutoso m_s

O O

LU'_-,

x xxl:xx

........xx t+

........ XIX X X

x×xx

X XX

_ X X .....

ooo

-=8

X X

• Cuando se ve en modo TEXTO sin recibir emisiones de TEXTO, la

pantalla puede ponerse en blanco y negro, Si ocurriera esto, ponga el modo CLOSED CAPTION en OFE

(Imagen oscura y en blanco)

Para la localizaci6n del Servicio T_cnico Autorizado de Sharp m_.s pr6ximo o para conseguir material de informaci6n, repuestos o asistencia t_cnica, llame a 1-800-BE-SHARR

Page 50

(FRAN( AIS)

Lisez attentivement ces instructions et gardez-les & proximite pour toute reference ult_rieure.

IMPORTANT Afin de vous aider en cas de perte ou de vol, inscrivez

les numeros de s_de et de module du t_tSviseur dans les espaces fournis &cet effet Ces num_ros sont situ_s &

I'arri_re du t61_viseur

Deux raisons importantes d'enregistrer rap!dement Ia garantie de votre nouveau t_l_viseur SHARP & l'aide de la carte d'enregistrement REGISTRATION CARD) incluse darts le coils :

LA PREMIERE - LA GARANTIE

Gr&ce & elle, vous obtiendrez immediatement les avantages client concernant la garantie des pi_ces, du service et des travaux applicable & votre achat

LA DEUXIEME - LA LOt SUR LA SECURITE DU PRODUIT DE CONSOMMATtON (CONSUMER PRODUCT SAFETY ACT)

Gr&ce& elle, vous recevrez rapidement unavis de s_curite lots du contr61e,de la modification ou du rappel de votre produitque SHARPpeut _treamen_&fournirconformement &_aloi de1972sur la s_curit_ du produit de consommation

LfSEZ ATTENTIVEMENT LE PARAGRAPHE-GARANT{E LIMtTEE,, DE LA DERNII_REPAGE

N° du module :

N° de s_rie :

AVERTnSSEMENT: POUR REDUIRE LE RISQUE D'INCENDIE OU D'ELECTROCUT,ON,I

ATTENTION : POUR REDUIRE LE RISQUE

D'ELECTROCUTION,

NE RETiREZ PAS LE CAPOT (OU LE PANNEAUARRtERE)

UAPPAREILNE CONTIENT AUCUNE PIECE A ENTRETENIR

PAR I'UTILISATEUR

CONSULTEZUN PERSONNELQUALIFIE POUR

LA MAINTENANCE

"Note & Fintention de Hnstallateur du syst_me CATV : Ca rappel est fourni afin d'attirer l'attention de I'instailateur de syst_me CATV sur l'article 820-40 du National Electrica! Code qui indique les r_gles de mise

& ]a terre appropriee et, en particulier, sp_cifie que la ligne de terre dolt _tre connectee au r_seau commun de raise & taterre du b&timent, au point le plus proche possible de la source."

AVERTISSEMENT - Les r6glementations FCC _tab]issent que des changements ou des modifications non autoris_s sur cet _quipement et non approuv_s express_ment par le fabricant peuvent annuler tout pouvoir

de rutilisateur sur le fonctionnement de cet _quipement

N'EXPOSEZ PASCET EQU1PEMENTA DES ENDROITSTRES HUMIDES.

Le symbole de la foudre sous

forme de fl_che dans un triangle est suppos_ indiquer

l'utilisateur que les pieces

internes au produit constituent un risque d'etectrocution

Lesymboledupoint d'exclamation dans un triangle est suppos_ indiquer & l'utilisateur que des

instructions de fonctionnement et

de maintenance importantes se trouvent dans la documentation

fournie avec I'_quipement,

MISE AU REBUT DU PRODUIT

Ce produit utilise un tube & rayons cathodiques (TRC) contenant du plomb & braser et du brasage

tendre

La mise au rebut de ces matieres peut _tre r_gtement_e pour des raisons environnementafes Pour

toute information sur la mise au rebut ou lerecyclage, contactez les autorit_s locales ou les precautions

.......... importantes ur_conis_es par Iasoci_t_ Electronics industries Alliance _r ; W_W_eiae,org.

Page 51

o MATJo..........S MPORTAN

ATTENTION:

• Ne ptacez pas le cordon d'alimentation sous le t_l_viseur ou sous tout autre objet lourd . Ne placez pas de bougies ni de flammes nues sur le t_16viseur ou & sa proximite, afin d'_viter les

incendies

• Veillez & ne pas _cfabousser ni faire tomber de l'eau sur ces appareils afin d'_viter les incendies ou tes _lectrocutions Ne placez jamais d'objets remplis de liquide, comme des vases, sur ces appareils.

ATTENTION " . -

les pour un usage ult_rieur. L:_nergie _tectrique peut ex_cuter de nombreuses fonctions utiles_Cet appareil a _t_ congu et fabriqu_ de fagon

& garantir votre enti_re s_curit_ CEPENDANT, TOUTE UTILISAT1ON INADEQUATE PEUT ENTRA1NER DES

RISQUES D'ELECTROCUTION OU D'INCENDIE Afin de ne pas d_truire les protections int_gr_es & cet appareil,

respectez les r_gles de base suivantes pour son installation, son utilisation et sa maintenance

1 D_branchez [a television avant de la nettoyer.

2 N'utilisez pas de nettoyants fiquides ou d'aerosols et utilisez un chiffon hurnide 3 N'utilisez pas d'accessoires deconseilfes par le fabricant de materiel video, car ils impliquent des

risques

4 N'utilisez pas cette t616vision & proximit_ d'eau -- par exemple, pres d'une baignoire, d'un lavabo, d'un

_vier ou d'un bac & laver, dans une cave humide ou pros d'une piscine, etc

5 Ne placez pas cet equipement sur un chariot, un support ou une table instable Latelevision

peut tomber et provoquer de graves l_sions & toute personne et causer de s_rieux dommages & I'_quipement Utilisez uniquement un support ou un chariot recommand_

par le fabricant ou vendu avec la t_16vision

6 L:ensemble t61_vision-chariot dolt #tre deplac_ d_licatement. Les arrets brusques, une

force excessive et des surfaces inegales peuvent renverser t'ensemble

7 L:instatlation au mur ou sur une tabtette dolt _tre r_alis_e conform_ment aux instructions du fabricant et

& l'aide d'un kit de montage approuv_ par ce dernier

8 Les fentes et les ouvertures du chassis & I'arri_re ou dans la partie inf_deure sont pr_vus pour la

ventilation Pour garantir un fonctionnement fiable de ta t_levision et pour ta prot_ger de route surchauffe, ces ouvertures ne doivent _tre ni obtur_es, ni recouvertes. La t_l_vision ne dolt pas etre plac6e dans un

endroit encastr_ tel qu'une bibliotheque, sauf si une ventilation adequate est pr_vue.

9 Les ouvertures ne doivent jamais Ctre recouvertes par un chiffon ou autre et celles de la partie inf6rieure

ne doivent jamais etre obturees si vous placez la t_l_vision sur un lit, un sofa, un tapis ou toute surface similaire Cette t_16vision ne dolt ¢tre piacee ni & proximit_ d'un radiateur ou d'un registre de chaleur, ni

dessus

• Veudlez hre routes ces instructions avant d'utiliser votre t_t_vlsion et conservez-

t 0 Cette televisiondolt _tre aliment_e uniquement par le type d'alimentation electrique indiqu_ sur l'_tiquette

Si vous n'etes pas sOrdu type d'alimentation de votre domicile, consultez votre revendeur de t_l_vision ou la compagnie d'_lectricit_ locale (EDF en France).

Pour la t_l_vision concue pour fonctionner sur batterie, reportez-vous au mode d'emploi.

11 Du point de vue de la s_curit_, la t_l_vision est _quip_e d'une fiche polaris_e & 2 ills (une lame plus

importante que l'autre) La fiche polaris6e & 2 ills ne p_n_tre dans la prise _lectrique que darts un seul sens

Si la fiche ne correspond pas & la prise, demandez &votre _lectricien de remplacer la prise, elle dolt 6tre

obsol#te. Ne modifiez pas la fiche et ne d_sactivez pas cette fonction de s_curit_

Ne posez rien sur fecordon d'alimentation Ne placez pas lat_16visiondarts un emplacement ou le cordon

d'alimentation est susceptible d'etre endommag_ par le passage r_p_t_ de personnes.

Page 52

® Nomenclature

(FRAN( AIS)

ALIMENTATION (POWER) -- Appuyer -.'. Pour mettre sous

tension Appuyer de nouveau _ Pour

mettre hors tension CAPTEUR DE [

TE_L_COMMANDE RI_GLAGE (MENU)

Appuyer _ Pour meltre sous tension,

Appuyer de nouveau _'. Pour mettre hors tension

ALIMENTATION (POWER) Appuyer _ Pour mettre sous tension

Appuyer de nouveau _ Pour mettre hors tension

PAVE NUMERIQUE DE A DISTANCE (REMOTE KEYPAD)

S_tectionne directement le canal voulu sur le pay6 num6rique

RETOUR (FLASHBACK) Rappelle le canal regarde precedent

AUGMENTATIO

VOLUME SONORE (VOLUME UP/ DOWN)

(-tL) Pour augmenter le volume du son (-) Pour diminuer le volume du son

• Modifie ou s_tectionne les r_glages TV sur I'affichage sur

6cran

SOURDtNE (MUTE) Appuyer _ Mise en sourdine du son

Appuyer de nouveau -_ R_tablissement du son

• Lorsque le son est coup_. SOUS-TtTRE apparait si la fonction est disponible

AUGMENTATIONtRI_DUCTIO N

DU VOLUME SONORE (VOL)

(+) Pour augmenter te volume du son (-) Pour diminuer te volume du son

AUDIO_

Canal HAUT/BAS

(_.) S_tectionne te canal sup_deur

(_) S_lectionne le canal inf_rieur

precedent

Fen_tre d'#mission du signal infrarouge

ENTRI_E (INPUT) Appuyer _ Pour selectionner le mode ENTREE 1 video externe

Appuyer 2 lois -+ Pour selectionner le mode

ENTREE 2 video externe

Appuyer 3 lois -+ Pour revenir au mode TV

ENTRE_E 3 video externe ou le mode COM- initial (Voir page 40)

ENTRER(ENTER) Paffois utilisee Iorsqu'un convertisseur

n6cessite I'introduclion d'une commande "enter" apr_s la s_lection de canaux e

!aide du pave num_rique de commande & distance.

• Confirmaient le choix de canal TOUCHES DES CANAUX CROISSANT/

DECROISSANT (CHANNEL UPtDOWN) (&) Selectionne lecanal supedeur suivant

(y) S61ectionne lecanal inf_fieur precedent

•Voir page 33-34 pour pr6regler les

canaux

R_GLAGE (MENU) Appuyer .-.4.Acc_s au MENU PRINCIPAL Appuyer de nouveau _ Sortie du MENU

PRINCIPAL

AFFICHAGE (DISPLAY)

Appuyer _ Pour afficher le canal re_;u pendant quatre secondes Appuyer de nouveau _ Pour faire disparaitre te canal

• Pour afficher temporairement le canal re_:u en mode Sous-titres

Page 53

V_rifierlospointssuivantsafinded_terminers'i{estpossiblede rem_dierau probl_mepar unsimpler6glagedescommandos

SOLU'rlONPOSSIBLE

.......Essayerunnouvi'a'u'canats'ilfondionne,i{s'agit

probablementd'unepannede{achaine

X X X X IX X X X X X X

Letd_viseuresNlbranch,? Laprisesecteurfondionne+dle?

X X X

L'inter[upteurPOWERdotdl_viseurest-ilsous Iension?

L'antenneest-etieraccord_eauxberries_I'arri_re

deI'appareil? SiI'antenneext_rieureestutiiist}e,s'assurerqu'il

n'yapasdeIllssedionn_s VOdfie_s'iln'yapasd'inted_rencelocaleoude

bruitdectdqueext_rieur MettreI'{nterrupteurPOWERherstensionpuisde

nouveausoustensionauboutd'uneminute X Rdgierla andedeCOULE i .

....

ROglerla"commandedeCONT'RASTE ...............X

X X

.... X X X X ....................X X

X X X X X X X X X X{ X

x x xi x x x_,x x x{ x

WrifierI'appareilvidO0/audi0externe:s'assurer quelosc_biesdeconnexionnesonlpasdesserr_s X X X

OUcass_s

Veriiier{espilesdelatdidcommande ....i...........

X X

Fa{tesg{isserlesO{ecteurdemodeCATVIDVD- TVIVCRsur{apositionTV X

Lesc_blesaudiosontCstermementconnect_s? V_rilierleniveauduvolume X X

Loshaut-par{eursfonctionnenNis? X

................. i__

Mdtreiemodesou's-titragehersservice"ARRET"

........Moded'dconomied'_ne!g!esur"ARREr". X

D_brancher{etdl_viseuret{erebrancherapr_s deuxminutes X X X X X X X X X X X

Remarque:/.%

, En mode TEXTE, s'il n'y a pas d'6mission TEXTE & recevoir, i'_cran

du t616viseur pourrait _tre sombre et vide, Dans cecas, placer le mode

Sous-titrage hers service

(Image sombre et vide)

Pour connaitre I'emplacement du centre de service apr6s-vente agr_6 Sharp le plus proche ou pour

obtenir de la documentation sur les produits, des accessoires, des consommables ou une aide au consommateur, appelez le 1-800-BE-SHARR

Page 54

CONSUMERLIMITED WARRANTY

SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the "Product"), when shipped in its original container, will be free from defective workmanship and materials, and agrees that itwill, at its option, either repair the defect or replace the defective Product

or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below

This warranty does not apply to any appearance items of the Product nor to the additional excluded

item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in design or construction.

tn order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer

The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW Some states do not allow limitations on how long an implied

warranty lasts, so the above limitation may not apply to you. Neither the sales personnel of the setler nor any other person is authorized to make any warranties

other than those described herein, or to extend the duration of any warranties beyond the time period

described herein on behalf of Sharp The warranties described herein shall be the sole and exclusive warranties granted by Sharp and

shall be the sole and exclusive remedy available to the purchaser Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and

responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise In no event shall Sharp

be liable or in any way responsible, for any damages or defects in the Product which were caused by

repairs or attempted repairs performed by anyone other than an authorized servicer Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage Some states do not allow the exclusion of incidental or consequential damages, so that above exclusion may not apply to you.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

Model Specific Section

Your Product Model Number & Description:

Warranty Period for this Product:

Additional Item(s) Excluded from Warranty Coveragei_y_:

Where to Obtain Service:

What to Do to Obtain Service:

32SC26B, 32 inch Color Television (Be sure to have this information available when you

need service for your Product )

One (t) year parts and labor The warranty period continues for an additional one (1) year, for a total of two (2) years, with respect to the picture tube(s) in the Product for parts only Labor and service are not

provided free of charge for this additional period. Non-rechargeable batteries.

From a Sharp Authorized Servicer located in the United States. To find the location of the nearest

Sharp Authorized Servicer, call Sharp toll free at 1-800-BE-SHARR

Contact your Sharp Authorized Servicer to obtain in-home service for this Product The Servicer will

come to your home and if it is necessary to remove the Product, the Servicer will reinstall it Be sure to

have Proof of Purchase available,

Page 55

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07430-2135

Printed in Mexico TINS-C431WJZZ 06POI-MMP