Sharp 21QF2-U Owner Manual

E1 SAFETY PRECAUTIONS

ENGLISH

(На звороті)

УКРАЇНСЬКА

Contents

[ SAFETY

PRECAUTIONS ]

[ ACCESSORIES ]

[ ANTENNA

CONNECTION ]

• Connecting to an antenna

• Connecting to an antenna via a VCR

[ CONNECTING

OTHER EQUIPMENTS ]

Please read this operation manual carefully before using the colour television.

[ PART NAMES ]

• TV set

• Remote control

• Installing batteries in the remote control unit

[ BASIC OPERATION ]

• Turn on the power

• On-screen display language selection

• Channel selection

• Adjusting volume

[ SETTING AND

ADJUSTMENT ]

• Channel setting

• Picture adjustment

COLOUR TELEVISION

21QF2-U

OPERATION MANUAL

[ FEATURES ]

• Off timer

• Child lock

• Blue screen

[ USEFUL FEATURES ]

• Channel/Timer display

• Mute

• Channel recall

• TV/Video selection

[ TROUBLESHOOTING ]

E10

[ SPECIFICATIONS ]

E11

TINS-D558WJZZ 08P01-MSF

Damage

Turn off the power and unplug the power cord from the wall outlet immediately if the TV set begins to make any unusual noises or gives off smoke or an unusual smell. Then call your dealer for service.

Unstable surface and shocks

Do not place this TV set on an unstable cart, stand, shelf, or table. The TV set may fall, causing serious injury to a child or adult, and serious damage to the set. Sharp recommends securing the TV set to a stable surface or wall to prevent the set from falling due to sudden shocks or impact.

Moisture

To prevent electrical shock, do not use the TV set in an excessively damp place.

Liquid entry

Do not place a ﬂ ower vase or anything else containing liquid on the TV set, as liquid spilt on the TV set can cause electrical shock or failure.

TV Set position

Do place the TV set onto an even stand, table or rack which size is bigger than the TV set. If the TV set is put onto a smaller size or uneven stand, table or rack may cause the TV cabinet distort. Do not put or insert anything between TV set and the stand, table or rack.

Ventilation

Do not place this TV set in a conﬁ ned area, such as on a bookshelf or in a built-in case. Leave adequate space behind the TV for proper ventilation.

Servicing

To reduce the risk of electric shock, do not remove the back of the cabinet. This TV set contains dangerous voltage.

Power-cord protection

To prevent electrical shock, do not subject the AC power cord to damage by bending or twisting it, or by placing heavy items on top of it and do not place the AC power cord under the TV set. If the AC power cord becomes damaged, unplug it from the wall outlet immediately and call your dealer for service.

Water

To prevent ﬁ re or electrical shock, do not place the TV set near a bathroom, swimming pool or other area where it may become wet.

Object entry

Never insert or drop any metallic or inﬂ ammable objects into the ventilation openings of the TV set, as this can cause ﬁ re, electrical shock, or electrical failure.

Uneven surface and excessive force

Television equipment and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the equipment and cart combination to overturn.

Fire prevention

To prevent ﬁ re, never place any type of candle or naked ﬂ ames on the top or near the TV set.

21QF2-U_EN.indd 121QF2-U_EN.indd 1 12/28/07 12:12:01 PM12/28/07 12:12:01 PM

E2 ACCESSORIES

E4 CONNECTING OTHER EQUIPMENTS

The following accessories are included with this television.

6 E

Remote Control Size-AA batteries

Operation manual

E3 ANTENNA CONNECTION

Connecting to an antenna Connecting to an antenna via a VCR

300-ohm twin-lead flat feeder (not supplied)

Standard DIN45325

plug (IEC 169-2)

75-ohm impedance converter (not supplied)

75-ohm coaxial cable (round cable) (not supplied)

Antenna in

VCR

To RF out terminal

To antenna in terminal

Enjoy playback from a video disc player, VCR or other video equipment by connecting them to

TV set

this TV set using the Audio/Video in terminals.

Example of side terminals usage

To Audio/Video out terminals

Yellow : To VIDEO White : To AUDIO

DVD Player

Camcorder

VCR

Video Game

Example of rear terminals usage

For Playback

DVD Player

To Audio/Video out terminals

Yellow : To VIDEO White : To AUDIO

For Recording and Editing

VCR

If your outdoor antenna uses a 75-ohm coaxial cable with a standard DIN45325 plug (IEC 169-2), plug it into the antenna jack at the rear of the set.

If your outdoor antenna uses a 300-ohm twin-lead ﬂ at feeder, connect a 300-ohm to 75-ohm impedance converter and plug it into the antenna jack at the rear of the set.

• The audiovisual cords required to connect the TV set with video equipment may differ from those shown in the above diagram. See the operation manual of your video equipment for connection details.

• The above recording and editing connections are intended solely for personal use and not for the illegal copying of

• When using the RF terminal connection, set the TV to channel zero to make initial adjustments for the VCR.

21QF2-U_EN.indd 221QF2-U_EN.indd 2 12/28/07 12:12:06 PM12/28/07 12:12:06 PM

audiovisual material protected by copyright laws.

To Audio/Video out terminals

VCR

To Audio/Video in terminals

E5 PART NAMES

E5 PART NAMES (Continued)

TV set

POWER switch

Turns on and off the

POWER

main power.

Channel up/down buttons

Selects the channels. Tunes or sets the channels.

Remote control

Turns the TV on or to Standby mode.

Returns to previously viewed channel.

Adjusts the volume.

Used for MENU setup.

TIMER

Displays the Off Timer.

Mutes the sound and restores sound

to previous level.

LANGUAGE

Changes the on-screen display

language.

Displays the channel and timer settings

on the screen.

Infrared transmitter window

Aim this window at the infrared sensor window on your TV set.

TV/VIDEO

TIMER

NORMAL

LANGUAGE

TV/VIDEO

Switches between TV broadcasts and A/V input programmes.

Number buttons

Switches between one- or two-digit mode channel selection.

Selects the channel. Used for MENU setup.

Calls the MENU screen.

NORMAL

Resets all settings.

Power can be turned on by the

remote control when the indicator

Receives the infrared wave from

21QF2-U_EN.indd 321QF2-U_EN.indd 3 12/28/07 12:12:07 PM12/28/07 12:12:07 PM

Power indicator

is dimly lit.

Infrared sensor window

the remote control.

Volume up/down buttons

Adjusts the volume. Makes adjustments in PRESET.

MENU/PRESET

MENU/PRESET button

Tunes the channels. Used for MENU setup.

Installing batteries in the remote control unit

With your thumbnail, pull up at the slit to open the

battery cover.

Insert two batteries (size AA).

Replace the battery cover.

+ 5 hidden pages