Sharp 20F650 User Manual

Download

COLOR TELEVISION

20F650

L OPERATION MANUAL L

Products that have earned the ENERGY STA R

environment through superior energy efficiency.

MODEL

are designed to protect the

CONTENTS

• IMPORTANT INFORMATION/IMPORTANT

SAFEGUARDS .................................................. 2 ~ 4

• Supplied Accessories .............................................. 5

• Before Operating Your Television ............................. 5

• Antenna Connections ........................................ 5 ~ 6

• Quick Reference Control Operation................... 7 ~ 8

• EZ SETUP during First Use ..................................... 9

• Demo Mode ........................................................... 10

• Accessing the MAIN MENU screen without

Remote Control ...................................................... 10

• Language ............................................................... 11

• Sleep Timer ........................................................... 12

• Video Adjust .......................................................... 13

• Audio Adjust........................................................... 14

• Audio Select................................................... 15 ~ 16

MTS (Multichannel TV Sound) ............................ 15

SPEAKER (Internal Speaker Switch) ................. 15

FAO (Fixed Audio Output) ...................................15

This operating manual includes basic operating

instructions in Spanish and French.

SPANISH is on page 47 ~ 52.

FRENCH is on page 53 ~ 58.

PAG E

• Closed Caption ...................................................... 17

• Parental Control ............................................. 18 ~ 28

V-CHIP Operation .......................................18 ~ 25

VIEW TIMER .............................................. 26 ~ 28

• Ch Setup ........................................................ 29 ~ 34

EZ Setup .............................................................29

Channel Setting .......................................... 30 ~ 32

Personal Preference ........................................... 33

Universal Plus Function ...................................... 34

• Set Up ............................................................ 35 ~ 37

Energy Save ....................................................... 35

Blue Screen ........................................................ 36

Auto Input ........................................................... 37

• Using the Video and Audio Input Jacks ......... 38 ~ 39

• Using the Audio Output Jacks ............................... 40

• Operation of Universal Remote Control ......... 41 ~ 44

• Before Calling for Service ......................................45

• Calling for Service ................................................. 45

• Specifications ........................................................ 46

• Limited Warranty.................................................... 59

PAG E

B731 WJ

Welcome to the SHARP Family. We are pleased that you are now the owner of a SHARP Color Television – built for outstanding quality, reliability and performance. Every SHARP Color Television set is tuned and adjusted for proper color and sound, and has passed through the most stringent quality control tests at the factory. We have prepared this OPERATION MANUAL so that you may adjust the picture and color to your personal viewing preference. We sincerely hope that you receive the greatest satisfaction and enjoyment from your new SHARP Color Television set for years to come. Please read these instructions carefully, and keep them handy for your future reference.

IMPORTANT

To aid reporting in case of loss or theft, please record the TV’s model and serial numbers in the space provided. The numbers are located at the rear of the TV.

Model No.:

Serial No.:

IMPORTANT INFORMATION

There are two important reasons for prompt warranty registration of your new SHARP television set. Use the REGISTRATION CARD packed in with the set.

FIRST – WARRANTY

This is to assure that you will immediately receive the full consumer benefit of the parts, service and labor warranty applicable to your purchase.

SECOND – CONSUMER PRODUCT SAFETY ACT

To assure that you will promptly receive any safety notification on inspection, modification or recall that SHARP may be required to give under the 1972 Consumer Product Safety Act. PLEASE READ CAREFULLY THE IMPORTANT “LIMITED WARRANTY” CLAUSE ON THE LAST PAGE.

WARNING:

CAUTION: TO REDUCE THE RISK OF

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

“Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.”

WARNING – FCC Regulations state that any unauthorized changes or modifications to this equipment not

expressly approved by the manufacturer could void the user’s authority to operate this equipment.

PRODUCT DISPOSAL

This product utilizes a Cathode Ray Tube (CRT) containing lead and tin lead solder. Disposal of these materials may be regulated due to environment considerations. For disposal or recycling information, please contact your local authorities or the Electronics Industries Alliance:www.eiae.org

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO WET LOCATIONS.

The lightning flash with arrowhead within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons.

ELECTRIC SHOCK,

PERSONNEL.

The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance.

IMPORTANT INFORMATION (Continued)

CAUTION:

• Do not place the AC power cord under the TV set or other heavy items.

• To prevent fire, never place any type of candle or naked flames on the top or near the TV set.

• To prevent fire or shock hazard, do not expose this products to dripping or splashing. No objects filled with liquids, such as vases, should be placed on the product.

IMPORTANT SAFEGUARDS

CAUTION: Please read all of these instructions before you operate your television and save

these instructions for later use.

Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARDS. In order not to defeat the safeguards incorporated in this equipment, observe the following basic rules for its installation, use and servicing.

1. Unplug this television equipment from the wall outlet before cleaning.

2. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

3. Do not use attachments not recommended by the television equipment manufacturer as they may cause hazards.

4. Do not use this television equipment near water — for example, near a bath tub, washbowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool, etc.

5. Do not place this equipment on an unstable cart, stand, or table. The television equipment may fall, causing serious injury to a child or an adult, and serious damage to the equipment. Use only with a cart or stand recommended by the manufacturer or sold with the television equipment.

6. Television equipment and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the equipment and cart combination to overturn.

7. Wall or shelf mounting should follow the manufacturer’s instructions, and should use a mounting kit approved by the manufacturer.

8. Slots and openings in the cabinet and the back or bottom are provided for ventilation. To insure reliable operation of the television equipment and to protect it from overheating, these openings must not be blocked or covered. This television equipment should not be placed in a built-in insulation such as a bookcase unless proper ventilation is provided.

9. The openings should never be covered with a cloth or other material, and the bottom openings should not be blocked by placing the television equipment on a bed, sofa, rug, or other similar surface. This television equipment should never be placed near or over a radiator or heat register.

10. This television equipment should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your television dealer or local power company.

For television equipment designed to operate from battery power, refer to the operating instructions.

11. As a safety feature, television equipment is equipped with a 2-wire polarized plug (one plug blade bigger than the other). The 2-wire polarized plug will fit only one way into the power outlet.

If the plug does not fit, ask your electrician to replace your obsolete outlet. Do not modify the plug and defeat this safety feature.

12. Do not allow anything to rest on the power cord. Do not locate this television equipment where the cord will be abused by persons walking on it.

IMPORTANT SAFEGUARDS (Continued)

13. Follow all warnings and instructions marked on the television equipment.

14. If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

ANTENNA LEAD IN WIRE

GROUND CLAMP

ANTENNA DISCHARGE UNIT

ELECTRIC SERVICE EQUIPMENT

NEC - NATIONAL ELECTRICAL CODE

15. For added protection for this television equipment during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the equipment due to lightning and power-line surges.

16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

17. Do not overload wall outlets and extension cords as this can result in fire or electric shock.

18. Never push objects of any kind into this television equipment through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the television equipment.

19. Do not attempt to service this television equipment yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

20. Unplug this television equipment from the wall outlet and refer servicing to qualified service personnel under the following conditions: A. When the power cord or plug is damaged or frayed. B. If liquid has been spilled into the television equipment. C. If the television equipment has been exposed to rain or water. D. If the television equipment does not operate normally by following the operating instructions. Adjust only

those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the

television equipment to normal operation. E. If the television equipment has been dropped or the cabinet has been damaged. F. When the television equipment exhibits a distinct change in performance — this indicates a need for

service.

21. Upon completion of any service or repairs to this television equipment, ask the service technician to perform routine safety checks to determine that the television is in safe operating condition.

22. When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

(NEC SECTION 810-20)

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC PART 250, PART H)

Supplied Accessories

ENTER

FLASHBACK

100

PERSONAL PREFERENCE

REC

VOL

)

SKIP

FWD

VCR-CH

STOP

PLAY

PAUSE

;

–

VOL

ABCD

MENU MUTE

POWER (DVD/VCR)

TV • CATV • VCR • DVD

(

REW

321

654

987

INPUT

DVD VCR

CATV

DISPLAY

POWER

Infrared Remote Control Dry batteries size “AA”/

1.5 V cc

Before Operating Your Television

Location

• For normal operation, your TV should be located in an area of the room where cool adequate ventilation

is provided. Do not place the back of the television set in a place where free airflow will be restricted.

• Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys

using magnets or any other magnetic substance, such as iron are kept well away from the TV set.

Power

Your TV operates on 120 Volts, 60 Hz (normal household current) and has a polarized plug. If you are unable to insert the plug fully into the outlet, try reversing the plug. Should it fail to fit, contact an electrician. Do not defeat the safety feature of the polarized plug.

Note:

• If the set is not going to be used for a long period, such as during a vacation, unplug the set from the

wall outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with the POWER BUTTON in the OFF position.)

• Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located

near the TV and both radio and TV broadcasts are being received. Should such noise appear, turn off either the TV or the radio.

• If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received

due to interference from the TV.

L Before using the television, prepare the Remote Control

To use the remote control, insert batteries first.

Insert the batteries

Pull up

Baterry

Cover

•

With your thumbnail, pull up the slit as indicated by the arrow to remove the back cover. Insert two batteries (size “AA”/1.5 V cc). Be sure to match the battery e/d terminals with the e/d marks inside the compartment.

Antenna Connections

Antennas

• The antenna requirements for good color television reception are more important than those for black

& white television reception. For this reason, a good quality outdoor antenna is strongly recommended. The following is a brief explanation of the type of connections that are provided with the various

antenna systems:

1. A 75 ohm system is generally a round cable with F-type connector that can easily be attached to a terminal without tools (not supplied).

2. A 300 ohm system is a flat “twin-lead” cable that can be attached to a 75-ohm terminal through a 300/75-ohm ADAPTOR (not supplied).

75-ohm coaxial cable (round)

300-ohm twin-lead cable (flat)

F-type connector

Antenna Connections (Continued)

OUTDOOR ANTENNA CONNECTION

• Use one of the following two diagrams if you connecting to an outdoor antenna.

A: Using a VHF/UHF combination outdoor antenna. B: Using separate VHF and/or UHF outdoor antenna.

• Connect an outdoor antenna cable lead-in to the ANT/CABLE terminal on the rear of the TV set.

A. Combination VHF/UHF Antennas

VHF/UHF ANTENNA

300-ohm twin-lead

VHF/UHF ANTENNA

75-ohm

coaxial cable

300/75-ohm ADAPTOR (Not supplied)

IN 1

COMPONENT

LINE

OUT

AUDIO

VIDEO

B. Separate VHF/UHF Antenna

VHF ANTENNA

UHF ANTENNA

300-ohm twin-lead

75-ohm coaxial

cable

COMBINER

(not supplied)

IN OUT

REAR PANEL

IN 1

COMPONENT

LINE

OUT

AUDIO

VIDEO

REAR PANEL

NOTICE

F-type connector

75-ohm coaxial cable

CABLE TV (CATV) CONNECTION

• A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm

coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR.

• Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay

channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company. This converter/descrambler is necessary for normal viewing of the scrambled channels. (Set your TV on channel 3 or 4. Typically one of these channels is used. If this is unknown, consult your cable TV company.) For more specific instructions on installing cable TV, consult your cable TV company. One possible method of utilizing the converter/descrambler provided by your cable TV company is explained below. Please note: RF switch equipped with position A/B (not provided) is required.

“A” position on the RF switch (not supplied): You can view all unscrambled channels using the TV’s

“B” position on the RF switch (not supplied): You can view the scrambled channels via the converter/

RF switch (not supplied)

OUT

F-type connector should be finger-tightened only

When connecting the RF cable to the TV set, do not tighten F-type connector with tools. If tools are used, it may cause damage to your TV set. (The breaking of Internal circuit, etc.)

channel keys.

descrambler using the converter’s channel keys.

Two-set

OUT

signal splitter (not

supplied)

Cable TV Line

Cable TV converter/

descrambler

(not supplied)

Note:

•

Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that might be required.

Quick Reference Control Operation

• Part Names

Front Panel

POWER

Press → On. Press again → Off.

REMOTE CONTROL SENSOR

Press → Accesses MAIN MENU. Press again → Exits MAIN MENU.

VOLUME UP/DOWN

(+) Increases sound. (–) Decreases sound.

To open the door

Using the projection located under the “PULL-OPEN” indication, pull and lift the door open.

To close the door

Using the projection, lower the door until closed.

Caution:

• When opening or closing the door, do not insert your fingers

into the gap between the door and front panel. This may result in an injury.

Rear Panel

VIDEO/AUDIO IN 2 TERMINALS

(INSIDE DOOR)

CHANNEL UP/DOWN

(8) Selects next higher channel. (9) Selects next lower channel.

ANTENNA/CABLE INPUT TERMINAL

COMPONENT

IN 1

COMPONENT

LINE

OUT

AUDIO

VIDEO

IN 1

LINE

OUT

AUDIO

VIDEO

LINE OUT TERMINALS

VIDEO/AUDIO TERMINALS (IN 1)

COMPONENT TERMINALS (IN 1)

Quick Reference Control Operation (Continued)

• Part Names

Basic Remote Control Functions

POWER

Press → On. Press again → Off.

REMOTE KEYPAD Accesses any channel from keypad.

FLASHBACK Returns to previous channel.

PERSONAL PREFERENCE With the Personal Preference buttons, you can program your favorite programs by using the 4 categories A, B, C and D. The channels can be accessed quickly by using these buttons. (See page 33.)

VOLUME UP/DOWN (+) Increases sound. (–) Decreases sound.

• In menu mode, changes or selects the TV adjustments.

MENU Press → Accesses MAIN MENU. Press again → Exits MAIN MENU.

MUTE

Press → Mutes sound. Press again → Restores sound.

• CLOSED CAPTION appears when sound is muted.

POWER (DVD/VCR) Press → On. Press again → Off.

DVD/VCR CONTROL See page 41.

REC

POWER

MENU MUTEg SKIP

POWER (DVD/VCR)

CATV

DVD VCR

DISPLAY

INPUT

PLAY

PAUSE

STOP

VCR-CH

ENTER

VOL

FWD

)

FLASHBACK

PERSONAL PREFERENCE

ABCD

VOL

;

–

REW

(

TV • CATV • VCR • DVD

321 654 987

100

REC

Infrared Transmitter Window

CATV/DVD-TV/VCR MODE buttons

Press TV/VCR, sends power and channel select commands (Channel up/down and Random Access buttons) to the TV and VCR control. Press CATV/DVD, sends power and channel select commands to a cable TV converter and DVD control.

DISPLAY

Press → Displays receiving channel for four seconds. Press again → Removes display.

• Temporarily displays receiving channel when in Closed Caption mode.

INPUT

Press → Switch to external video INPUT 1 mode or COMPONENT mode. Press 2 times → Switch to external video INPUT 2 mode. Press 3 times → Switch back to the original TV mode. See page 39.

ENTER

Used in some instances where a Cable Converter Box requires an “enter” command after selecting channels, when using the REMOTE KEYPAD button. (See page 41)

CHANNEL UP/DOWN

(8) Selects next higher channel. (9) Selects next lower channel.

• See pages 30 ~ 32 for channel

presetting.

• Moves the “ a ” mark of the MENU

screens.

SKIP/VCR-CH

Note:

• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the remote control, place it under a fluorescent light or other lighting.

• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.

• The degree of illumination will vary depending on the strength of lighting used.

• The degree of illumination will decrease with time and depending on the temperature.

• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.

• Sunlight and fluorescent lighting are the most effective when charging the display.

EZ SETUP during First Use

L When you turn on the TV for the first time, it will automatically

memorize the broadcast channels. Please perform the following instructions before pressing the

POWER button. (1) Insert the batteries into the remote control. (See page 5) (2) Connect the antenna cable to the TV set. (See page 5 ~ 6) (3) Plug in the AC POWER cord to the wall outlet.

1 Press

POWER

on the TV set or on the Remote Control to turn on

the TV. The SELECT LANGUAGE mode will be displayed.

(Remote Control)

POWER

2 Press

CH UP (8)

DOWN (9)

(On the Set)

to select “ENGLISH”, “SPANISH

(ESPAÑOL)” or “FRENCH (FRANCAIS)”.

3 Press

VOL (+)

(–)

to SET LANGUAGE and access EZ SETUP

mode.

VOL

;

–

VOL

INPUT

ENTER

VOL

POWER

VOLUME

321 654

(+)/(–)

987

100

CHANNEL UP (8)/

DOWN (9)

8 / 9

POWER

CATV

DVD VCR

DISPLAY

FLASHBACK

PERSONAL PREFERENCE

ABCD

VOL

;

–

MENU MUTEg SKIP

VCR-CH

POWER (DVD/VCR)

LLAANG GEUECT

NGL SHI

SPA OLÑ

RAN A SIC

ELE T CH:

ET VOL+/ –:

(SELECT LANGUAGE mode)

LLAANG GEUECT

NGL SHI

SPA OLÑ

RAN A SIC

ELE T CH:

ET VOL+/ –:

NTANNT NA ORENE

BLE

STE

ZARTSETUP?

TOP S ARTT

8 / 9

(EZ SETUP mode)

(STOP)

VOL

;

–

(START)

VOL

EWAITASE

AUR

OG GTO P

AMMI N

TOP S ARTT

4 Press

VOL (+)

. The tuner will automatically search for the broadcast and cable TV channels. (The CH No. will automatically increase when it appears.)

If you want to stop the EZ SETUP process once it has started, press

VOL (–)

and it will be canceled.

If you want to SETUP again, please refer to page 29 on CH SETUP.

To cancel EZ SETUP

Press

VOL (–)

5 Once EZ SETUP is completed, the lowest channel number

memorized will be displayed.

Note:

• If EZ SETUP does not memorize all the channels in your region, please refer to page 30 for more information on manually memorizing the channels using CHANNEL SETTING.

• It may be difficult to PRESET when the broadcast signals are weak, the channel cycle frequency is incorrect or frequency jamming is occuring around the area. Please refer to pages 30 ~ 32 for more information on manually memorizing the channels using CHANNEL SETTING.

Demo Mode

• To quickly learn more about the TV set, press and hold for more than three seconds both

on the TV set. The TV set will go into DEMO mode and

briefly explain the various features.

• To cancel DEMO mode, again press and hold for more than three seconds both the TV set.

Example:

DEMO mode display

CH UP (8)

and

DOWN (9)

and

DOWN (9)

(On the Set)

CHANNEL

UP (8)/

DOWN (9)

buttons

Accessing the MAIN MENU screen without Remote Control

• If you misplaced your Remote Control you can still access most settings via the MAIN MENU screen when you press

• Some features of your TV set will not be accessible without the Remote Control. If you lost your Remote Control, contact a Sharp Service Center for a replacement.

on the TV set.

(On the Set)

MENU button

button

Language

L The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH. L Setting the ON SCREEN DISPLAY Language.

1 Press

2 Press

3 Press

)

(

4 Press

to access the MAIN MENU screen.

CH UP (8)

VOL (+)

DOWN (9)

VOL (+)

DOWN (9)

(–)

to access SETUP screen, then press

to move the “a” mark to “SETUP”.

to move the “a” mark to “LANGUAGE”.

(–)

to access LANGUAGE change mode.

VOL

MENU SLEEP T IMER VIDEO ADJUST AUD IO AD JUST AUD IO SE LECT

CLOSED CAPT PAREN CH TSE UP SETUP

TAL CON ROLT

ION

(MAIN MENU screen)

MENU SLEEP T IMER VIDEO ADJUST AUD IO AD JUST

CH UP

→

VOL

;

–

VOL

;

–

AUD IO SE LECT CLOSED CAPT PAREN

TAL CON ROLT CH TSE UP SETUP

SET PU

LANG GUA E ENERGY SAVE BLUE SCREE AUTO I NPUT

(SETUP mode)

ANG GUA E

ENGL HIS ESPAÑOL FRAN A ICS

ION

(LANGUAGE change mode)

5 Press

CH UP (8)

DOWN (9)

(ESPAÑOL)” or “FRENCH (FRANCAIS)”.

6 Press

to exit.

to select “ENGLISH”, “SPANISH

ENGL HIS ESPAÑOL FRAN A ICS

DIOMA

Sleep Timer

L You can preset your television to turn off automatically in increments of 30, 60, 90 or 120

minutes.

1 Press 2 Press

to access the MAIN MENU screen.

VOL (+)

(–)

to access SLEEP TIMER mode.

→

VOL

MENU SLEEP T IMER VIDEO ADJUST AUD IO AD JUST AUD IO SE LECT CLOSED CAPT

VOL

;

–

PAREN CH TSE UP SETUP

TAL CON ROLT

ION

(MAIN MENU screen)

3 Press

VOL (+)

(–)

to set a sleep time of 30, 60, 90 or 120 minutes.

VOL

SLEEP T IMER

12 M0AREM NI

VOL

;

–

(SLEEP TIMER mode)

4 Press

to exit.

Note:

• To turn off the SLEEP TIMER, repeat the above SLEEP TIMER steps and select “– – – M REMAIN”

during step 3.

• While SLEEP TIMER is active, the time remaining will be briefly displayed on-screen at regular

intervals or when the remote’s DISPLAY key is pressed.

Video Adjust

Description of Adjustment Items

Selected VOL UP (+) button VOL DOWN (–) button item

PICTURE To increase contrast To decrease contrast TINT To make skin tones greenish To make skin tones purplish COLOR To increase color intensity To decrease color intensity BRIGHT To increase brightness To decrease brightness SHARP To increase sharpness To decrease sharpness COLOR To choose a MH, HIGH, LOW or ML COLOR TONE.

TEMP. RESET To return all adjustments to factory preset levels.

POWER

CATV

DVD VCR

DISPLAY

FLASHBACK

PERSONAL PREFERENCE

ABCD

VOL

;

–

MENU MUTEg SKIP

VCR-CH

POWER (DVD/VCR)

INPUT

ENTER

VOL

321 654 987

VOLUME

100

(+)/(–)

CHANNEL

UP (8)/ DOWN (9)

1 Press 2 Press

to access the MAIN MENU screen.

CH UP (8)

ADJUST”.

3 Press

4 Press

VOL (+)

CH UP (8)

(–)

(Refer to the diagram below.)

VOL (+)

TINT

COLOR TEMP.

: CH DOWN (9)

(–)

PICTURE

RESET

: CH UP (8)

5 Press

DOWN (9)

to move the “a” mark to “VIDEO

to access PICTURE adjust mode.

VOL

DOWN (9)

COLOR

to select the desired mode.

BRIGHT

SHARP

to adjust the setting.

VOL

→

–

MENU SLEEP T IMER VIDEO ADJUST AUD IO AD JUST

AUD IO SE LECT CLOSED CAPT PAREN

TAL CON ROLT CH TSE UP SETUP

ION

(MAIN MENU screen)

VOL

;

PICTURE

_______

(PICTURE adjust mode)

VOL

;

PICTURE

VOL UP (+) increase contrast

VOL DOWN (–) decrease contrast

_______

6 Repeat steps 4 to 5 to adjust other settings. 7 Press

Note:

• VIDEO ADJUST setting is available for AIR or CABLE/INPUT 1/INPUT 2 and COMPONENT respectively.

to exit.

Audio Adjust

Selected item VOL UP (+) button VOL DOWN (–) button

TREBLE To increase treble response To decrease treble response BASS To increase bass response To decrease bass response BALANCE To emphasize the right speaker’s volume To emphasize the left speaker’s volume RESET To return all adjustments to factory preset levels.

1 Press 2 Press

to access the MAIN MENU screen.

CH UP (8)

ADJUST”.

3 Press

4 Press

VOL (+)

CH UP (8)

(–)

(Refer to the diagram below.)

TREBLE

5 Press

VOL (+)

BASS

(–)

DOWN (9)

to move the “a” mark to “AUDIO

to access TREBLE adjust mode.

DOWN (9)

BALANCE

to select the desired mode.

RESET

to adjust the setting.

VOL

→

–

MENU SLEEP T IMER VIDEO ADJUST AUD IO AD JUST

VOL

;

VOL

;

AUD IO SE LECT CLOSED CAPT PAREN CH TSE UP SETUP

(MAIN MENU screen)

(TREBLE adjust mode)

TAL CON ROLT

TRE E 0BL

ION

6 Repeat steps 4 to 5 to adjust other settings. 7 Press

to exit.

Audio Select

L MTS (Multichannel TV Sound)

This circuit allows reception of stereo or bilingual TV sound.

L SPEAKER (Internal Speaker Switch)

This function turns the TV’s internal speakers “ON” or “OFF” when listening to sound from external speakers by using the AUDIO OUTPUT JACKS on page 40.

L FAO (Fixed Audio Output)

This function turns the TV’s internal speakers “OFF” and allows fixed audio output from the AUDIO OUTPUT JACKS on page 40. With FAO, the TV’s volume control is disabled.

1 Press 2 Press

to access the MAIN MENU screen.

CH UP (8)

DOWN (9)

SELECT”.

3 Press 4 Press

VOL (+)

CH UP (8)

(–)

to access AUDIO SELECT mode.

DOWN (9)

“SPEAKER” or “FAO”.

5 Press

VOL (+)

(–)

to select “STEREO”, “SAP” or “MONO” when

the “a” mark is at “MTS” position.

MTS

STEREO

SAP

SPEAKER

OFF

MONO

6 Press

to exit.

to move the “a” mark to “AUDIO

→

to move the “a” mark to “MTS”,

VOL

;

–

→

FAO

VOL

;

–

OFF

MENU SLEEP T IMER VIDEO ADJUST AUD IO AD JUST AUD IO SE LECT CLOSED CAPT PAREN CH TSE UP SETUP

(MAIN MENU screen)

MTS : SAP SPEAKER :ON FAO F:O F

(AUDIO SELECT mode)

MTS : STEREO SPEAKER :ON FAO F:O F

(AUDIO SELECT mode)

ION

TAL CON ROLT

AUD IO SE LECT

Ex: Actual screen indicating ON AIR when receiving STEREO broadcasts

Actual channel number “← ON AIR” will appear next to STEREO or

SAP when receiving STEREO or SAP broadcasts.

STE EO ON A I RR SAP ON A I R

MON O

(CHANNEL call on screen)

Audio Select (Continued)

L You can enjoy Hi-Fi stereo sound or SAP broadcasts where available.

• Stereo broadcasts Live television transmission of sports, shows, concerts, etc. can be received in dynamic stereo sound.

• SAP broadcasts Television broadcast can be received with either MAIN or SAP sound. MAIN sound: The normal program soundtrack. (Monaural or stereo where available.) SAP sound: Second language, supplementary commentaries, etc. (SAP sound is monaural.)

L If stereo sound is difficult to hear.

• You can obtain clearer sound by manually switching to the fixed monaural mode.

Note:

• Once MONO mode is selected, the TV sound remains monaural even if the TV set receives a stereo broadcast. You must switch the mode back to STEREO if you want to hear stereo sound again.

• MTS while in the INPUT mode does not change the type of sound; in this case, sound is determined by the video source.

• If the “FAO ” mode is selected “ON”, the “SPEAKER” mode will automatically turn “OFF”. “SPEAKER” selecting will not affect “FA O” mode.

Closed Caption

L HOW TO SET CLOSED CAPTION

• Your TV is equipped with an internal Closed Caption decoder. “Closed Caption” is a system which allows you to view conversations, narration, and sound effects in TV programs and home videos as subscript on your TV screen as shown on the right.

• Not all the programs and videos will offer closed caption. Please look for the “ ” symbol to ensure that captions will be shown.

• Closed Caption broadcast can be viewed in two modes: CAPTION and TEXT. For each mode, two channels are available, CH1 and CH2:

The CAPTION mode subscripts dialogues and commentaries of TV dramas and news programs while allowing clear view of the picture. The TEXT mode displays over the picture other various information (such as TV program schedule, weather forecast, etc.) that is independent of the TV programs.

PERSONAL PREFERENCE

ABCD

VOL

;

–

MENU MUTEg SKIP

VCR-CH

POWER (DVD/VCR)

VOLUME

(+)/(–)

CHANNEL

UP (8)/ DOWN (9)

1 Press 2 Press

to access the MAIN MENU screen.

CH UP (8)

DOWN (9)

CAPTION”.

3 Press

4 Press

VOL (+)

CH UP (8)

(–)

to access CLOSED CAPTION setting mode.

DOWN (9)

“MODE” or “DATA”.

5 Press

VOL (+)

(–)

to change the CLOSED CAPTION setting.

MODE: DATA:

CAPTION

TEXT

OFF

to move the “a” mark to “CLOSED

→

VOL

;

–

to move the “a” mark to either

CH 1

CH 2

VOL

;

–

MENU SLEEP T IMER VIDEO ADJUST AUD IO AD JUST AUD IO SE LECT

CLOSED CAPT PAREN CH TSE UP SETUP

TAL CON ROLT

ION

(MAIN MENU screen)

CLOSED CAPTI ON

MODE : C AP

DATA :CH1

TION

(CLOSED CAPTION setting mode)

CLOSED CAPTI ON

MODE : C AP DATA :CH1

TION

CLOSED CAPTI ON

TION

6 Press

to exit.

Note:

•

If a broadcast has CLOSED CAPTION and the automatically. Pressing

•

CLOSED CAPTION may malfunction (white blocks, strange characters, etc.) if signal conditions are poor or if

MUTE

again will return the set to its previous condition.

MUTE

button is pressed, the set enters CAPTION mode

there are problems at the broadcast source. This does not necessarily indicate a problem with your TV.

•

If any button is pressed to call up the ON SCREEN DISPLAY while viewing a CLOSED CAPTION broadcast, the CLOSED CAPTION will disappear momentarily.

•

When viewing in TEXT mode, if no TEXT broadcast is being received, for some programs the screen may become dark and blank. Should this occur, set the CLOSED CAPTION mode to “OFF”.

Parental Control (V-CHIP Operation)

1. User setting 2. Block table

age

based

not to block

Select block

autoblock

PG-13

NC-17

– – – – –

BLOCK

PG-13

NC-17

L V-CHIP

• This function allows you to restrict TV programs and also allows you to control TV usage based on FCC data. This function is to prevent your children from watching violence or sexual scenes that may be harmful.

• Restriction of TV programs includes two characters that contain information about the program’s MPAA rating and the TV Parental Guidelines. MPAA is restricted by age. TV Parental Guidelines are restricted by age and contents.

• Since a TV program may use either the MPAA rating or the TV Guidelines you should adjust both for complete control.

[1] MPAA RATING

RATING

G GENERAL AUDIENCES. All ages admitted. PG PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for

age PG-13 PARENTAL STRONGLY CAUTIONED. Some material may be inappropriate

based for children under 13.

R RESTRICTED. Under 17 requires accompanying parent or adult guardian. NC-17 NO ONE 17 AND UNDER ADMITTED. X X Rating is an older rating that is unified with NC-17 but may be encoded on

• MPAA RATING (Example) Example 1.

“PG-13” in the age based RATING is blocked, this will automatically block the higher ratings “R”, “NC-17”, “X” also.

1. User setting 2. Block table

– – – – –

BLOCK

PG-13

BLOCK

NC-17

BLOCK

children.

older movie’s data.

PG-13

age

based

NC-17

not to block

Select block

autoblock

Example 2.

“R” in the age based RATING is blocked, this will automatically block the higher rating “NC- 17”, “X” also.

Note:

• MPAA RATING is only age based ratings.

[2] TV PARENTAL GUIDELINES

RATING

TV-Y (All children) V ––––– TV-Y7 (Direct to Older Children) V ––––V

TV-G (General Audience) V –––––

Age TV-PG (Parental Guidance

based Suggested)

TV-14 (Parents Strongly

Cautioned) TV-MA (Mature Audience Only) V – VVV –

V : Content Rating can be set. – : Content Rating cannot be set (not normally broadcast by TV station).

AGE D L S V FV

(Sexually (Adult (Sexual (Violence) (Fantasy

Suggestive Language) Situation) Violence)

Dialog)

VV V V V –

content base

Parental Control (V-CHIP Operation) (Continued)

• TV-PARENTAL GUIDELINES (Example) Example 1.1 : Age Based setting

Go through all select ratings and select unblocked for “AGE”. This will automatically unblock everything.

Example 1.2 : Age Based setting

For “TV-G” select “BLOCK” for “AGE”. This will automatically block the higher age ratings “TV-PG”, “TV-14” and “TV-MA” as well as “TV-G”.

Furthermore, the content ratings “D”, “L”, “S”, “V”, “FV” are automatically blocked as well for “TV-PG”, “TV-14” and “TV-MA” as well as “TV-G”.

Example 2.1 : Content Based setting

For “TV-PG”, “TV-14” and “TV-MA” select unblocked for each content ratings (“D”, “L”, “S”, “V”, “FV”) by leaving “AGE” unblocked for “TV-PG”, “TV-14” and “TV-MA”. If you choose to unblock for each one in content base.

Example 2.2 : Content Based setting

Then for “TV-PG” and select “BLOCK” for only “V” (Violence). This will automatically block the higher ratings “TV-14-V” and “TV-MA-V” (“TV-14” and “TV-MA” for Violence content only).

Please note that with these settings blocking does NOT occur. If a program is rated only “TV-MA”; it must be rated “TV-MA-V” to be blocked.

Example 3 : Reset an Age Based setting

For “TV-14” and select again “BLOCK” for “AGE”. This will again automatically block the content ratings “D”, “L”, “S”, “V”,

“FV” for “TV-MA” as well as “TV-14”.

Please note that the lower age rating “TV-PG” did not change from its

previous settings.

TV– Y –– ––– TV– Y7 TV– G TV GP– TV– 41 TV– AM RET RNU

TV– Y –– ––– TV– Y7 TV– G TV GP– TV– 41 TV– AM

RET RNU

TV– Y –– ––– TV– Y7 TV– G TV GP– TV– 41 TV– AM RET RNU

EDLSVFVGA

–––– –––––

–

V:BLOCK

EDLSVFVGA

–––– –––––

V V V V V V – V

V V V V –

–

V V V –

V:BLOCK

EDLSVFVGA

–––– –––––

–

V:BLOCK

EDLSVFVGA

––––

–––––

V – V –

–

V –

V:BLOCK

EDLSVFVGA

–––– –––––

V V V V –

V V V –

–

V:BLOCK

– – –

–

Note:

• Content ratings can be modified but only in the combinations indicated by an V in the table on page

18.

• Changing a lower age rating’s content setting to “BLOCK” automatically changes the same higher age rating’s content setting to “BLOCK” regardless of their previous settings.

• Changing a lower rating’s “AGE” setting to “BLOCK” automatically changes all higher ratings to “BLOCK” regardless of their previous settings.

• Any rating’s “AGE” set to unblocked must have its content settings individually set.

[3] ADDITIONAL MODE

Besides the above “MPAA RATINGS” and “TV PARENTAL GUIDELINES” new ratings system’s data can be downloaded when they become available. (See page 22.)

Parental Control (V-CHIP Operation) (Continued)

L HOW TO SET V-CHIP

[1] MPAA RATING

1 Press 2 Press

to access the MAIN MENU screen.

CH UP (8)

“PARENTAL CONTROL”.

3 Press

4 Press

press

VOL (+)

(–)

DOWN (9)

to move the “a” mark to

→

to access PARENTAL CONTROL mode.

VOL

;

–

to access V-CHIP BLOCK select mode, then

to select “MPAA RATING”.

VOL

;

–

→

VOL

;

–

REMOTE

321

KEYPAD

654 987

FLASHBACK

ENTER

VOLUME

100

PERSONAL PREFERENCE

ABCD

VOL

;

–

MENU MUTEg SKIP

VCR-CH

POWER (DVD/VCR)

SLEEP T IMER VIDEO ADJUST AUD IO AD JUST AUD IO SE LECT CLOSED CAPT PAREN

TAL CON ROLT CH TSE UP SETUP

VOL

(+)/(–)

CHANNEL UP (8)/ DOWN (9)

ION

(MAIN MENU screen)

PARENT CONTOLAL

V –CH I P B LOCK VIEW TIMER

(PARENTAL CONTROL mode)

V –CH IP OCKLB

MPA A

TV UGI

DEL INES

OP OINT

SEC ERT ––No . STA UTSO:FF

: ––

(V-CHIP BLOCK select mode)

5 Press

CH UP (8)

then press

VOL (+)

DOWN (9)

(–)

to move the “a” mark to “PG”,

to select BLOCK. If you set “PG” to

BLOCK, “PG-13”, “R”, “NC-17” and “X” are automatically blocked.

6 Press

then press

CH UP (8)

VOL (+)

DOWN (9)

to move the “a” mark to "RETURN",

(–)

to exit V-CHIP BLOCK select mode.

→

VOL

;

–

VOL

;

Note:

Ex.

• If you set “G” to BLOCK , all RATING are automatically blocked.

• If you set “X” to BLOCK, “G”, “PG”, “PG-13”, “R” and “NC-17” are not blocked.

PG PG 31– R

C – 71

N X RET RNU

PG PG 31– R

C – 71

N X RET RNU

MPA A

–

MPA A

–

Parental Control (V-CHIP Operation) (Continued)

[2] TV GUIDELINES

1 Repeat steps 1 to 3 of [1] MPAA RATING. 2 Press

3 Press

4 To change CONTENT SETTING, press

5 Press

VOL (+)

(–)

press

CH UP (8)

to access V-CHIP BLOCK select mode, then

DOWN (9)

to move the “a” mark to “TV

GUIDELINES”.

VOL

;

–

VOL (+)

(–)

to access TV GUIDELINES mode.

CH UP (8)

to move the “a” mark to the desired rating and then press or

(–)

to select.

CH UP (8)

DOWN (9)

content and then press unblock (“– – – – –”).

to move the “a” mark to the desired

VOL (+)

→

(–)

to select either “BLOCK” or

→

VOL

→

VOL

;

–

DOWN (9)

VOL (+)

VOL

;

–

VOL

;

–

VOL

V –CH IP OCKLB

MPA A

TV UGI

DEL INES

OP OINT

SEC ERT ––No . STA UTSO:FF

: ––

(V-CHIP BLOCK select mode)

TV– Y –– ––– TV– Y7 TV– G TV GP– TV– 41 TV– AM

RET RNU

EDLSVFVGA

–––––

V V V V V V – V

V V V V –

V V V –

–

V:BLOCK

V––––

(TV GUIDELINES mode)

TV– Y7

AGE D L S

V FV RET RNU

–

(CONTENT RATING mode)

6 Press

CH UP (8)

then press

VOL (+)

DOWN (9)

to move the “a” mark to "RETURN",

(–)

to return to TV GUIDELINES mode.

→

VOL

;

–

7 Repeat steps 4 to 5 until all ratings and their contents are set.

8 When done, press

to exit.

VOL

TV– Y –– ––– TV– Y7 TV– G TV GP– TV– 41 TV– AM

RET RNU

EDLSVFVGA

–––– –––––

V V V V V V – V

V V V V –

V V V –

–

V:BLOCK

Parental Control (V-CHIP Operation) (Continued)

[3] ADDITIONAL MODE (DOWNLOAD)

There will be an additional new rating system. In that case, please set up as follows. Subsequently the new rating system will set up automatically.

1 Repeat steps 1 to 3 of [1] MPAA RATING. 2 Press

3 Press

4 Press

• DOWNLOAD V-CHIP DATA

press

)

(

press

VOL (+)

CH UP (8)

VOL (+)

DOWN (9)

VOL (+)

to exit.

(–)

to access V-CHIP BLOCK select mode, then

DOWN (9)

(–)

to access OPTION mode, then press

to move the “a” mark to “OPTION”.

VOL

–

to move the “a” mark to “DOWNLOAD”, then

(–)

to “DOWNLOAD : ON”.

VOL

;

–

V –CH IP OCKLB

MPA A

TV UGI

DEL INES

OP OINT

SEC ERT ––No .

→

VOL

;

STA UTSO:FF

(V-CHIP BLOCK select mode)

CH UP

DOWNLO

VOL

→→

VOL

;

–

RETURN

FLASHBACK

PERSONAL PREFERENCE

ABCD

VOL

;

–

MENU MUTEg SKIP

POWER (DVD/VCR)

: ––

OPT ION

AD: ON

(OPTION mode)

321 654 987

ENTER

100

VOL

VCR-CH

REMOTE KEYPAD

VOLUME

(+)/(–)

CHANNEL UP (8)/ DOWN (9)

1 If you watch the program containing “New Rating System Data”,

the DOWNLOAD screen will be displayed.

PLEASE WA IT

NOW DOWNLOAD ING

V – CH IP DATA

(DOWNLOAD screen)

2 The DOWNLOAD screen will disappear, once downloading is

finished.

Note:

• DOWNLOAD will not start, if you do not watch a program containing “New Rating System Data”.

Parental Control (V-CHIP Operation) (Continued)

• How to set Additional mode (Example)

N HOL D BLO CK )

31ans+ 61ans+ 81ans+

N HOL D BLO CK )

OPT ION

AD: ON

NENGLISH

mode)

N FRENCH

mode)

1 Repeat steps 1 to 2 of [3] ADDITIONAL MODE. 2 Press

CH UP (8)

DOWN (9)

English Ratings”, then press

to move the “a” mark to “Cdn.

VOL (+)

(–)

VOL

→

–

VOL

;

3 You can select “BLOCK” or “– – – – –” (unblock) from each RATING

mode by pressing

CH UP (8)

DOWN (9)

and

VOL (+)

→

VOL

(–)

VOL

;

–

4 You can select “BLOCK” or “– – – – –” (unblock) from each RATING

mode by pressing

CH UP (8)

you select “Cdn. French Ratings” in step 2.

DOWN (9)

and

VOL (+)

(–)

→

VOL

;

–

Cdn. Engl ish Ratings Cdn . F re nch Ra t i ng s

DOWNLO RETURN

(After download the rating data)

ANADI

C8+

PG 14+ 18+ RETUR THRES

(

(ENGLISH THRESHOLD BLOCK

ANADI

8ans+

RETUR THRES

(

(FRENCH THRESHOLD BLOCK

Note:

• In additional mode

Including two types (English mode, French mode), altogether you are able to download 4 different modes.

–: –––– –: –––– –: –––– –: –––– –: ––––

B:LOCK

–: –––– –: –––– –: –––– –: ––––

B:LOCK

Parental Control (V-CHIP Operation) (Continued)

L Turning On (Activating) the V-Chip Blocks

1 Repeat steps 1 to 3 of [1] MPAA RATING. 2 Press

3 Enter a 4-digit SECRET No. using the

4 Press

5 When done, press

VOL (+)

(–)

press

CH UP (8)

to access V-CHIP BLOCK select mode, then

DOWN (9)

to move the “a” mark to “SECRET

No.”.

REMOTE KEYPAD

CH UP (8)

then press

VOL (+)

DOWN (9)

(–)

to move the “a” mark to “STATUS”,

to activate the V-CHIP BLOCK. (If STATUS

is OFF, V-CHIP BLOCK will not operate.)

to exit.

VOL

–

→

VOL

;

321 654 987

→

VOL

;

–

V –CH IP OCKLB

MPA A

TV UGI

OP OINT

SEC ERT ––No . STA UTSO:FF

(V-CHIP BLOCK select mode)

V –CH IP OCKLB

MPA A

TV UGI

OP OINT

SEC ERT 34No . STA UTSO:FF

V –CH IP OCKLB

MPA A

TV UGI

OP OINT

SEC ERT 34No . STA UTSO:FF

L To cancel the V-CHIP BLOCK screen while V-CHIP BLOCK has been activated.

1 “V-CHIP HAS BEEN ACTIVATED” will be displayed if you view a

program containing Program Rating data as same as you configured.

Note:

• “V-CHIP HAS BEEN ACTIVATED” will not be displayed if STATUS is not configured to “ON”.

V –CIHP

AC VIAETDT

TV– Y7 FV

DEL INES

: ––

DEL INES

:12

DEL INES

:12

HAS BEEN

2 Press

3 Enter the 4-digit SECRET No. using the

Note:

, then “INPUT SECRET No.” will be displayed.

REMOTE KEYPAD

, then V-CHIP BLOCK temporarily will be canceled. If the wrong SECRET No. is chosen, “SECRET No. IS INCORRECT” will be displayed. Input the SECRET No. again in this case.

321 654 987

INP TUS

INP TUSEECR T oN.

∗∗∗∗

• If you turn the power from OFF, the V-CHIP BLOCK will automatically reset to ON again.

EECR T oN.

––––

Parental Control (V-CHIP Operation) (Continued)

L To change the V-CHIP BLOCK setting. (Secret No. is registered.)

1 Repeat steps 1 to 3 of [1] MPAA RATING, then “INPUT SECRET

No.” will be displayed.

2 Enter the 4-digit “INPUT SECRET No.” using the

KEYPAD

configuration of the V-CHIP BLOCK.

L If you forget or need to change your Secret No., clear the original Secret No. and set up a

new one.

and the V-CHIP select mode will be displayed. Repeat

REMOTE

321 654 987

INP TUS

EECR T oN.

––––

INP TUSEECR T oN.

∗∗∗∗

1 Repeat steps 1 to 3 of [1] MPAA RATING, or 1 to 2 of [L To cancel

the V-CHIP BLOCK screen while V-CHIP BLOCK has been activated], then “INPUT SECRET No.” will be displayed.

2 Press and hold both

VOL (+)

and

CH UP (8)

on the TV set

simultaneously until the message “INPUT SECRET No.” disappears.

(On the Set)

VOL (+)/CH UP (,)

buttons

3 Press the

button to exit.

Parental Control (VIEW TIMER)

L VIEW TIMER

This function allows you to restrict TV viewing time and also allows you to control TV usage. This function is to prevent your children from watching too much TV.

VIEWING TIME (an accumulative timer: counts only the time duration acquired while the TV is on.)

• VIEWING TIME can be set from 30M (30 minutes) to 10H00M (10 hours) in 30 minutes intervals.

OFF TIME (Restricts TV watching after the VIEWING TIME reaches zero.)

• OFF TIME can be set from 30M (30 minutes) to 10H00M (10 hours) in 30 minutes intervals.

STATUS (ON/OFF setting of VIEW TIMER)

VIEW ITREM

VIEWING TIME

– H–

––M

OF ITMFE

– H–––M SEC ERT :–– ––No. STA UTSO:FF

L How to set VIEW TIMER.

1 Press 2 Press

to access the MAIN MENU screen.

CH UP (8)

DOWN (9)

“PARENTAL CONTROL”.

3 Press 4 Press

VOL (+)

CH UP (8)

(–)

to access PARENTAL CONTROL mode.

DOWN (9)

TIMER”.

5 Press

6 Press

VOL (+)

CH UP (8)

(–)

to access VIEW TIMER mode.

DOWN (9)

“OFF TIME”. For each selection, press time duration.

to move the “a” mark to

→

to move the “a” mark to “VIEW

VOL

→

VOL

;

–

VOL

;

–

to select “VIEWING TIME” and

VOL (+)

(–)

to set the

→

VOL

;

–

MENU SLEEP T IMER VIDEO ADJUST AUD IO AD JUST AUD IO SE LECT CLOSED CAPT PAREN CH TSE UP SETUP

TAL CON ROLT

ION

(MAIN MENU screen)

PAREN ATCOLNRTOL

V-CHIP BLOCK

EIVTWIMER

(PARENTAL CONTROL mode)

VIEW ITREM

VIEWING TIME

– H–

––M

OF ITMFE

– H–––M SEC ERT :–– ––No. STA UTSO:FF

(VIEW TIMER mode)

VIEW ITREM

VIEWING TIME

00M

OF ITMFE

– H–––M SEC ERT :–– ––No. STA UTSO:FF

7 Press

CH UP (8)

4-digit SECRET No. using

8 Press

VOL (+)

CH UP (8)

(–)

to turn ON the “VIEW TIMER”. (If STATUS is OFF,

VIEW TIMER will not operate.)

DOWN (9)

to select “SECRET No.”. Enter a

REMOTE KEYPAD

DOWN (9)

→

321 654 987

to select “STATUS”. Press

→

VOL

;

–

VIEW ITREM

VIEWING TIME

00M

OF ITMFE

H500M SEC ERT :–– ––No. STA UTSO:FF

VIEW ITREM

VIEWING TIME

00M

OF ITMFE

H500M SEC ERT :12 43No. STA UTSO:N

Parental Control (VIEW TIMER) (Continued)

321 654 987

9 Press

to exit.

Example

• To restrict anybody from watching the TV for 5 hours, after watching the TV for 2 hours, your settings would look like this:

• They can choose to watch the 2 hours of TV however they wish. For example, they could watch 1 hour of TV, turn TV off for 30 minutes, then turn TV on and watch the remaining 1 hour on the VIEWING TIMER.

L To change the VIEW TIMER settings. (SECRET No. is registered)

1 Repeat “How to set VIEW TIMER” steps and select “PARENTAL

CONTROL VIEW TIMER” during step 3. Press “INPUT SECRET No.” will be displayed.

2 Enter the 4-digit SECRET No. using the

the VIEW TIMER mode will be displayed. Repeat step

Note:

• When you choose the correct SECRET No., the VIEW TIMER mode is displayed. If the wrong SECRET No. is chosen, “SECRET No. IS INCORRECT” is displayed. Input the SECRET No. again in this case.

VOL (+)

VOL

(–)

;

–

REMOTE KEYPAD

6 ~ 9

, and

VOL

, and

VIEW ITREM

VIEWING TIME

00M

OF ITMFE

H500M SEC ERT :12 43No. STA UTSO:N

INP TUS

EECR T oN.

––––

VIEW ITREM

VIEWING TIME

00M

OF ITMFE

H500M SEC ERT :12 43No. STA UTSO:FF

SECRET

No . SI

INCORRECT

L To cancel the VIEW TIMER (While the TV set is OFF but the VIEW

TIMER is set)

1 Turn on TV; a blue screen message “TIME OVER” will appear. If

you do nothing, the TV will turn off in approximately 30 seconds.

2 Enter the 4-digit SECRET No. using the

REMOTE KEYPAD

you choose the correct SECRET No., the VIEW TIMER is canceled. If the wrong SECRET No. is chosen, “SECRET No. IS INCORRECT” is displayed. Input the SECRET No. again in this case.

L To cancel the VIEW TIMER setting or change the SECRET No.

(When you forget the SECRET No.)

1 Repeat “How to set VIEW TIMER” steps and select “PARENTAL

CONTROL VIEW TIMER” during step 3. Press “INPUT SECRET No.” will be displayed.

VOL (+)

. When

(–)

, and

ME O EVR

INPUT TRSE E .NoC

–– ––

ME O EVR

INPUT TRSE E .NoC

∗∗∗∗

INP TUS

––––

EECR T oN.

Parental Control (VIEW TIMER) (Continued)

2 Press and hold both

VOL (+)

and

CH UP (8)

on the TV set simultaneously until the VIEW TIMER mode is displayed. Now you can cancel the VIEW TIMER settings or change the SECRET No. while “INPUT SECRET No.” is displayed.

L Notice of Remaining VIEWING TIME

• For every 30 minute interval, the “remaining time” will be displayed for 4 seconds. For the last 5 minutes, the “remaining time” will be displayed every minute.

•“0H00M REMAIN” will be displayed for 10 seconds just before the VIEWING TIME is complete.

(On the Set)

VOL (+)/CH UP (,)

buttons

VEW ITIMRE 030 RMHEIAM

VEW ITIMRE 005 RMHEIAM

VEW ITIMRE

000 RMHEIAM

Ch Setup

L EZ SETUP

By operating the channel preset functions, you can preset your TV to the desired channels for viewing.

1 Press 2 Press

to access the MAIN MENU screen.

CH UP (8)

DOWN (9)

to move the “a” mark to “CH

SETUP”.

→

3 Press

4 Press

VOL (+)

CH UP (8)

VOL (+)

DOWN (9)

(–)

to access CH SETUP mode, then press

to move the “a” mark to “EZ SETUP”.

VOL

(–)

to access EZ SETUP mode.

VOL

;

–

→

VOL

–

;

321

REMOTE

654

KEYPAD

987

FLASHBACK

ENTER

VOLUME

100

PERSONAL PREFERENCE

ABCD

VOL

;

–

MENU MUTEg SKIP

VCR-CH

POWER (DVD/VCR)

SLEEP T IMER VIDEO ADJUST AUD IO AD JUST

AUD IO SE LECT CLOSED CAPT PAREN

TAL CON ROLT CH TSE UP SETUP

VOL

ION

(+)/(–)

CHANNEL UP (8)/ DOWN (9)

(MAIN MENU screen)

CH ESUPT

AIR AC/BLE CH MME ORY

CH ASE RCH PERSONAL PR UN IV ERSAL PL SU EZ TSE UP

EF .

(CH SETUP mode)

CON EN

TACNTENNORA

CAB EL

STA ERT TUP?ZSE

VOL

STOP S ATRT

(EZ SETUP mode)

5 Press

VOL (+)

. The tuner will automatically search for the broadcasting and cable TV channels. (The CH No. will automatically increase when it appears.)

If you want to stop the EZ SETUP process once it has started,

VOL (–)

press

. Search will be canceled.

To cancel EZ SETUP

Press

VOL (–)

6 Once EZ SETUP is completed, the lowest channel number

memorized will be displayed.

PLE SA

WAEIT

AUT POR

OG GRAMMI N

215

STOP S ATRT

VOL

Ch Setup (Continued)

L CHANNEL SETTING

If EZ SETUP does not memorize all the channels in your region, follow the instructions below to manually memorize the channel.

1 AIR/CABLE setting

1 Press 2 Press

SETUP”.

3 Press

4 Press

5 Press

mode.

AIR

to access the MAIN MENU screen.

CH UP (8)

VOL (+)

CH UP (8)

DOWN (9)

(–)

to access CH SETUP mode.

(–)

to access AIR/CABLE mode.

DOWN (9)

to move the “a” mark to “CH

to move the “a” mark to the desired

CABLE STD CABLE HRC CABLE IRC

VOL

MENU SLEEP T IMER VIDEO ADJUST AUD IO AD JUST AUD IO SE LECT CLOSED CAPT PAREN

TAL CON ROLT CH TSE UP SETUP

ION

→

(MAIN MENU screen)

CH ESUPT

AIR AC/BLE CH MME ORY CH ASE RCH PERSONAL PR UN IV ERSAL PL SU

VOL

;

–

EZ TSE UP

EF .

(CH SETUP mode)

AI C/RBELA

AIR CABL E ST D CA LBEHRC CABL E CIR

VOL

;

–

(AIR/CABLE mode)

AI C/RBELA

AIR CABL E ST D

CA LBEHRC CABL E CIR

(AIR/CABLE mode)

6 Press

to exit.

Note:

• Receivable channels of your TV set are: AIR channels: CABLE channels:

VHF: 2 through 13. 1 (HRC and IRC mode only) UHF: 14 through 69. 2 through 125 (STD, HRC and IRC)

Ch Setup (Continued)

2 How to save broadcast TV channels into memory.

1.1 Press

to access the MAIN

MENU screen, then press

)

(

DOWN (9)

to move the “a”

CH UP

mark to “CH SETUP”.

1.2 Press

VOL (+)

(–)

to access CH SETUP mode, then press or

DOWN (9)

to move the “a” mark

CH UP (8)

VOL

;

–

to “CH SEARCH”.

1.3 Press

VOL (+)

(–)

to access CH SEARCH mode.

START

2.1 Press

VOL (+)

. The tuner will search through all available channels in your area and add them into the TV’s memory.

VOL

POWER

CATV

DVD VCR

DISPLAY

INPUT

321

VOLUME

654

(+)/(–)

987

ENTER

FLASHBACK

100

PERSONAL PREFERENCE

ABCD

VOL

;

–

MENU MUTEg SKIP

VCR-CH

POWER (DVD/VCR)

→

VOL

;

–

(START)

VOL

CH ESUPT

AIR/ ACBLE CH MME ORY CH ASE RCH PERSONAL PR UN IV ERSAL PL SU EZ TSE UP

(CH SETUP mode)

CH ESRCHA

ARI12

STOP S ATRT

CHANNEL

VOL

UP (8)/ DOWN (9)

EF .

STOP

2.2 Press

VOL (–)

. CH SEARCH will stop at the current channel and will not add any higher channels.

2.3 Press

to exit.

(STOP)

VOL

;

–

Note:

• If you press

VOL (+)

again while in the CH SEARCH mode, autoprogram will start again, and the previously memorized channels will be lost.

(CH SEARCH mode)

Ch Setup (Continued)

321 654 987

100

ENTER

3 How to add or erase weak, additional or unwanted channels from TV memory.

1 Press

2 Press

3 Press

4 Use

UP (

to access the MAIN MENU screen, then press

)

DOWN (9)

VOL (+) )

DOWN (9)

VOL (+)

CH UP (8)

to move the “a” mark to “CH SETUP”.

(–)

to access CH SETUP mode, then press

to move the “a” mark to “CH MEMORY”.

(–)

to access CH MEMORY mode.

DOWN (9)

each desired channel to add or erase.

VOL

;

–

REMOTE KEYPAD

→

MENU SLEEP T IMER VIDEO ADJUST AUD IO AD JUST AUD IO SE LECT CLOSED CAPT PAREN

TAL CON ROLT CH TSE UP SETUP

ION

(MAIN MENU screen)

→

VOL

CH ESUPT

AIR AC/BLE CH MME ORY CH ASE RCH PERSONAL PR UN IV ERSAL PL SU EZ TSE UP

EF .

(CH SETUP mode)

CH EMORYM

ARI12

VOL

;

–

EERAS A DD

(CH memory mode)

to select

5 Press

6 Press

VOL (+)

to erase a channel from the TV’s memory.

(–)

to add a channel to the TV’s memory or press

to exit.

VOL

;

–

Ch Setup (Continued)

321 654 987

100

ENTER

L PERSONAL PREFERENCE

By setting the PERSONAL PREFERENCE channels in advance, you can select your favorite channels easily.

1 Press 2 Press

to access the MAIN MENU screen.

CH UP (8)

DOWN (9)

to move the “a” mark to

“CH SETUP”.

→

3 Press

VOL (+)

CH UP (8)

DOWN (9)

(–)

to access CH SETUP mode, then press

to move the “a” mark to “PERSONAL

PREFERENCE”.

4 Press

VOL (+)

VOL

(–)

to select PERSONAL PREFERENCE select

VOL

;

–

→

mode in which you can program 4 favorite channels, in 4 different categories. (total of 16 channels)

VOL

;

–

5 Press

CH UP (8)

DOWN (9)

to move the “a” mark to the desired

position.

PERSONAL PREFERENCE

VOL

REMOTE

321

KEYPAD

654 987

FLASHBACK

ENTER

VOLUME

100

PERSONAL PREFERENCE

ABCD

VOL

;

–

MENU MUTEg SKIP

VCR-CH

POWER (DVD/VCR)

SLEEP T IMER VIDEO ADJUST AUD IO AD JUST AUD IO SE LECT CLOSED CAPT PAREN

TAL CON ROLT CH TSE UP SETUP

VOL

ION

(+)/(–)

CHANNEL UP (8)/ DOWN (9)

(MAIN MENU screen)

CH ESUPT

AIR AC/BLE CH MME ORY CH ASE RCH PERSONAL PR UN IV ERSAL PL SU EZ TSE UP

EF .

(SETUP mode)

PER OSPRE.FALN

><A B C D

––– ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– –––

(PERSONAL PREFERENCE select mode)

PER OSPRE.FALN

><A B C D

––– ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– –––

6 Press

REMOTE KEYPAD

on the Remote to input the CHANNEL

Number into the memory.

Example:

125 — Press “100” followed by “2” and then “5”. 25 — Press “2” and then “5”. 4 — Press “0” and then “4”.

7 Repeat steps 4 to 6 to input the next CHANNEL Number. 8 Press

to exit.

To select the PERSONAL PREFERENCE channel.

If the channels are memorized as shown to the right, press the Remote’s “A” button to select the Channels below.

125 25 40 4

PER OSPRE.FALN

><A B C D

125 ––– ––– –––

––– ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– –––

PER OSPRE.FALN

><A B C D

1258538–––

25 123 30 ––– 40 55 ––– –––

4 ––– ––– –––

Ch Setup (Continued)

L UNIVERSAL PLUS FUNCTION

VCR or DVD input mode will be selected automatically by pressing the VCR or DVD PLAY buttons on the UNIVERSAL REMOTE CONTROL.

1 Press 2 Press

to access the MAIN MENU screen.

CH UP (8)

DOWN (9)

to move the “a” mark to “CH

SETUP”.

→

3 Press

VOL (+)

CH UP (8)

DOWN (9)

(–)

to access CH SETUP mode, then press

to move the “a” mark to “UNIVERSAL

PLUS”.

4 Press

VOL (+)

VOL

(–)

to access UNIVERSAL PLUS to select VCR

VOL

;

–

→

or DVD mode.

VOL

;

–

VOLUME

VOL

ION

(+)/(–)

CHANNEL UP (8)/ DOWN (9)

PERSONAL PREFERENCE

ABCD

VOL

;

–

MENU MUTEg SKIP

VCR-CH

POWER (DVD/VCR)

SLEEP T IMER VIDEO ADJUST AUD IO AD JUST

AUD IO SE LECT CLOSED CAPT PAREN

TAL CON ROLT CH TSE UP SETUP

(MAIN MENU screen)

CH ESUPT

AIR AC/BLE CH MME ORY

CH ASE RCH PERSONAL PR UN IV ERSAL PL SU EZ TSE UP

EF .

(CH SETUP mode)

UN I EVSLARPLSU

VCR FF:O DVD FF:O

VOL

(EZ SETUP mode)

5 Press

press

CH UP (8)

VOL (+)

DOWN (9)

(–)

to select “CH3, CH4”, “INPUT 1 (or

COMPONENT)”, “INPUT 2” or “OFF”.

CH3 CH4

INPUT 1 (or COMPONENT)

OFF

INPUT 2

Set model to the input in which your VCR or DVD is connected to. If done through RF, select either channel 3 or 4 to match the setting of the VCR or DVD.

6 Press

to exit.

to select the VCR or DVD, and

→

VOL

;

–

UN I EVSLARPLSU

VCR H3:C DVD FF:O

(UNIVERSAL PLUS select mode)

Set Up

L ENERGY SAVE

This feature lets you lower the power consumption of your TV set which in turn saves you money and minimizes the impact on the environment. When this feature is turned on, it reduce the brightness of the TV to a level that consumes approximately 20 percent less energy than when the feature is turned off. The reduction in brightness will be less noticeable under low room lighting conditions.

1 Press 2 Press

to access the MAIN MENU screen.

CH UP (8)

DOWN (9)

to move the “a” mark to “SETUP”.

→

3 Press

4 Press

VOL (+)

CH UP (8)

VOL (+)

DOWN (9)

(–)

to access SETUP select mode, then press

to move the “a” mark to “ENERGY SAVE”.

VOL

(–)

to access ENERGY SAVE select mode.

VOL

;

–

→

POWER

CATV

DVD VCR

DISPLAY

INPUT

321

VOLUME

654

(+)/(–)

987

ENTER

FLASHBACK

100

PERSONAL PREFERENCE

ABCD

VOL

;

–

MENU MUTEg SKIP

VCR-CH

POWER (DVD/VCR)

SLEEP T IMER VIDEO ADJUST AUD IO AD JUST

AUD IO SE LECT CLOSED CAPT PAREN

TAL CON ROLT CH TSE UP SETUP

VOL

ION

CHANNEL UP (8)/ DOWN (9)

(MAIN MENU screen)

SET PU

LANG GUA E ENERGY SAVE

BLUE SCREE AUTO I NPUT

(SETUP mode)

ENERGY SAVE

:OFFATST US

5 Press

6 Press

VOL (+)

(–)

to exit.

to select “ON”.

VOL

;

–

(ENERGY SAVE select mode)

ENERGY SAVE

:ONATST US

VOL

;

–

Set Up (Continued)

L BLUE SCREEN

Automatically turns the screen blue if a broadcast signal is not received.

1 Press 2 Press

3 Press

)

(

4 Press

5 Press

to access MAIN MENU screen.

CH UP (8)

VOL (+)

DOWN (9)

VOL (+)

DOWN (9)

(–)

to access SETUP mode, then press

to move the “a” mark to “BLUE SCREEN”.

(–)

to access BLUE SCREEN select mode.

(–)

to select “ON”.

to move the “a” mark to “SETUP”.

→

CH UP

VOL

→

VOL

;

–

VOL

;

VOL

;

–

MENU SLEEP T IMER VIDEO ADJUST AUD IO AD JUST AUD IO SE LECT CLOSED CAPT PAREN CH TSE UP SETUP

TAL CON ROLT

ION

(MAIN MENU screen)

SET PU

LANG GUA E ENERGY SAVE BLUE SCREE AUTO I NPUT

(SETUP mode)

BLUE CSREEN

:OFFATST US

(BLUE SCREEN select mode)

BLUE CSREEN

:ONATST US

6 Press

to exit.

When BLUE SCREEN is set to “ON”.

No signal Blue screen TV off

After five

seconds

After 15 minutes

Standby

mode

Note:

• Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function despite the presence of a broadcast signal. To continue watching TV under these conditions, switch the BLUE SCREEN “OFF”.

Set Up (Continued)

L AUTO INPUT

The unit is preset to switch to the INPUT 2 mode automatically when VIDEO equipment is connected to the INPUT 2 terminal. Do the following to switch this feature off:

1 Press 2 Press

3 Press

4 Press 5 Press

(

CH UP (8)

VOL (+)

)

DOWN (9)

VOL (+) VOL (+)

to access MAIN MENU screen.

DOWN (9)

(–)

to access SETUP mode, then press

to move the “a” mark to “SETUP”.

to move the “a” mark to “AUTO INPUT”.

VOL

;

–

(–)

to access AUTO INPUT select mode.

(–)

to select “OFF” or “ON”.

VOL

;

–

→

VOL

6 You may turn off “AUTO INPUT” when it is not in use.

VOL (+)

(–)

Press

to select “OFF”.

VOL

MENU SLEEP T IMER VIDEO ADJUST AUD IO AD JUST AUD IO SE LECT CLOSED CAPT PAREN

TAL CON ROLT CH TSE UP SETUP

ION

→

(MAIN MENU screen)

→

CH UP

SET PU

LANG GUA E ENERGY SAVE BLUE SCREE AUTO I NPUT

(SETUP mode)

OAUT I NPUT

:ONATST US

2)IN(PUT

VOL

;

–

(AUTO INPUT select mode)

OAUT I NPUT

:OFFATST US

2)IN(PUT

VOL

;

–

7 Press

to exit.

Using the Video and Audio Input Jacks

L Connecting video equipment for playback of video material.

• When the television is connected to video equipment as shown below, the material being played back on the video equipment can be seen on the television screen.

Connecting video device equipped with video output terminals.

CONNECTIONS

VIDEO EQUIPMENT

CAMCORDER

TV GAME

To VIDEO OUTPUT

To AUDIO OUTPUT (L)

To AUDIO OUTPUT (R)

(Rear connection

terminals of TV)

IN 1

COMPONENT

(Front connection

terminals of TV)

(Pull open for inside door)

LINE

OUT

AUDIO

VIDEO

VCR

To VIDEO OUTPUT

To AUDIO OUTPUT (L)

To AUDIO OUTPUT (R)

DVD

Using the Video and Audio Input Jacks (Continued)

(Rear connection terminals of TV)

Video Equipment

To VIDEO OUTPUT

To AUDIO OUTPUT (L)

To AUDIO OUTPUT (R)

Video Equipment with Component Video (Component Color) Output Jacks (Y, P

To AUDIO OUTPUT (L/R)

and PR)

To COMPONENT VIDEO OUTPUT Jacks

IN 1

COMPONENT

AUDIO

VIDEO

LINE OUT

L To watch video material playback.

• Press the Remote’s

INPUT

button to select the VIDEO INPUT mode for the video equipment you wish

to play.

• The external VIDEO INPUT mode will change as follows each time the

AIR

CABLE

INPUT 1 (or COMPONENT)

(IN 1)

Rear

INPUT 2

(IN 2)

Front

INPUT

button is pressed.

• When the AV cables are being connected to the VIDEO INPUT 1 and COMPONENT Y terminals simultaneously, the COMPONENT terminal has priority over the VIDEO terminal.

• INPUT mode can be selected by pressing either the is set to the highest channel stored in memory, or by pressing the

CH UP (8)

on the TV remote control when the TV

CH DOWN (9)

when it is set to the

lowest channel.

Note:

• When connecting video or audio equipment to the television, be sure that the power is turned off in

order to prevent damage to either the television or the equipment being connected.

• It is the intent of SHARP that this product be used in full compliance with the copyright law of the

United States and that prior permission be obtained from copyright owners whenever necessary.

• For detailed information on the connection and use of auxiliary equipment, refer to the instruction

manuals of the equipment being used.

• The connection cords can be obtained from your local video store.

Using the Audio Output Jacks

L These jacks are used for connecting an external audio amplifier. The STEREO/MONO/SAP,

VOLUME, MUTE and FAO functions can all be controlled via the television’s remote control or directly on the TV itself. These jacks relay the audio signal of all programs being displayed on the TV screen.

(AUDIO OUTPUT JACKS are located on the rear of the cabinet.)

CONNECTIONS

(Rear connection

terminals of TV)

IN 1

COMPONENT

AUDIO

VIDEO

LINE

OUT

To the audio input terminals

IN 1

COMPONENT

LINE

OUT

AUDIO

VIDEO

Stereo Amplifier

Speaker System

(1) Before connecting the cables, turn on the TV and adjust the VOLUME control on the TV to a moderate

listening level. (2) Turn off the TV and connect the audio cables to the AUDIO LINE OUTPUT JACKS on the TV. (3) Turn the TV set and stereo amplifier on. (4) If you desire, you can turn off the sound to the TV’s internal speakers by acessing the TV’s AUDIO

SELECT mode. See page 15 ~ 16. (5) Adjust the VOLUME control on the stereo amplifier for a moderate listening level. (6) Control of the audio can be adjusted using the audio controls (STEREO/MONO/SAP, VOLUME,

MUTE and FAO), from either the remote control, or directly from the TV set.

Note:

• For detailed information on the connection and use of auxiliary equipment, refer to the operation manuals of the equipment being used.

• When connecting monaural equipment to the AUDIO INPUT or OUTPUT of this set, use an audio connection cord and plug adaptor as shown below.

• For optimal sound quality, we recommend you to keep the TV’s audio output level high.

Plug adapter

To the TV

Pin plug x 2 Pin Plug

Pin jack/Mini plug

To the equipment being connected

Operation of Universal Remote Control

• Universal Remote Control

With the purchase of your television set you also have received the latest innovation in remote control technology. With its easy-to-use push button keyboard, your Remote can control your television set and most infrared remote controlled VCRs, cable TV converters and DVDs as well.

Note:

• Depending on the model, year produced, brand

and type of VCR, cable TV converter and DVD, some models may not be compatible with the remote control.

• Some brands may not enable channel selection

until the

ENTER

button is pressed.

Example:

When you select channel 24, (1) Press

(2) Press (3) Press

REMOTE KEYPAD REMOTE KEYPAD ENTER

“2”. “4”.

For detailed information on the use of the Cable TV converter Box refer to their operating manuals.

• Using Your Remote With Your TV

After installing the batteries, press the on the remote to select the TV mode. (If you can change the channel of the TV by pressing

CH UP (8) or DOWN (9)

on the Remote

Control, it is the TV mode.)

TV/VCR

• “Identifying” Remote VCRs, cable TV

conveters and DVDs

Your Remote Control has been set at the factory to operate your TV and many remote control VCRs, cable TV converters and DVDs. However, in some cases an easy one-time setup step may be necessary before the Remote will operate accessory VCRs, cable TV converters and DVDs.

• In this set-up step, the Remote locates and memorizes the remote control transmitter code for the VCR, cable TV converters and DVDs.

• Once “identified”, the Remote sends the proper remote signals to operate your accessory.

• This identify step will not have to be repeated until power to the Remote is interrupted due to a battery failure.

• Using your remote control with a VCR

Once you make certain the Remote Control has “identified” your remote controlled VCR or DVD, the Remote Control is ready to operate your unit. The various VCR or DVD function buttons on the Remote Control will not operate your VCR or DVD if those features are not already found on your unit.

• All VCR buttons will operate whether the Remote Control is in TV or VCR modes.

• For detailed information on the use of the VCR or DVD, refer to the operation manual of the VCR or DVD.

PLAY -

Press to playback a tape or disc.

POWER (DVD/VCR)

Press to turn the VCR or DVD on and off.

REWIND 3

Press to rewind a tape or reverse a disc. For some VCRs or DVDs you may need to press STOP first, then REWIND.

STOP L

Press to stop the tape or disc.

PAUSE J

Press to temporarily stop the tape or disc during playback or recording (VCR only). Press again to release Pause.

POWER

CATV

DVD VCR

DISPLAY

INPUT

FLASHBACK

ENTER

100

PERSONAL PREFERENCE

ABCD

VOL

–

MENU MUTEg SKIP

POWER (DVD/VCR)

REW

(

;

PLAY

STOP

PAUSE

TV • CATV • VCR • DVD

VCR-CH

FWD

)

VOL

REMOTE KEYPAD

Use to enter two-digit code numbers

321 654 987

when identifying your VCR.

ENTER

VCR CHANNEL UP (8)/DOWN (9)

Press to scan up or down through

REC

channels on the VCR.

DVD SKIP

Press to jump forward to the beginning of the next chapter/track, or backward to the beginning of the current chapter/ track, and automatically start to play that chapter/track.

FF 2

Press to rapidly advance the tape or disc. For some VCRs or DVDs, you may need to press STOP first, then FF.

Operation of Universal Remote Control (Continued)

POWER

TV POWER

REMOTE

KEYPAD

POWER

(DVD/VCR)

CATV TV

DVD VCR

DISPLAY INPUT

FLASHBACK

ENTER

PERSONAL PREFERENCE

ABCD

VOL

–

MENU MUTEg SKIP

POWER (DVD/VCR)

REW

(

VOL

;

VCR-CH

PLAY

FWD

STOP

)

PAUSE

100

321 654 987

REC

CATV/DVDTV/VCR

DISPLAY

CHANNEL UP (,)/ DOWN(9)

• How to identify a VCR

The remote control may already be set to operate your VCR. Try this initial check before going on to the following “identify” section.

(1) Press (2) Point remote towards VCR and press

(3) Does the remote turn the VCR ON and OFF?

(1) Press (2) Press and hold down

(3) Within ten seconds after releasing

TV/VCR

button.

POWER

(DVD/VCR)

• If yes, the remote is ready to operate the VCR and no further steps are needed.

• If no, continue to the “identify” section.

Setting Method

Refer to the following steps and list to quickly find the remote control code for your accessory VCR.

• First look up your VCR’s remote control code number before going through the Setting Method.

TV/VCR

button.

(9)

on your remote control.

DISPLAY

and

CH DOWN

Then release both buttons.

DISPLAY

and

CH DOWN (9)

, enter your VCR’s two-digit

remote control code number using the

REMOTE KEYPAD

(refer to list).

• The remote control is now ready to send commands to your VCR.

Some brands have more than one remote code listed, due to changes in the remote codes from early to later model years, or due to format differences (VHS/BETA). In such cases, you may have to try more than one code to find the code your VCR accepts.

Note:

Depending on the model, year produced, brand, and type of VCR, some models may not be compatible with the remote control.

VCR BRAND

Akai 25, 26, 37 Audio Dynamics 15, 22, 30 Broksonic 32 Canon 04 Capehart 34 Craig 10, 31 Curtis Mathis 04 Daewoo 34 DBX 15, 22, 30 Dynatech 29 Emerson 21, 32, 35 Fisher 09, 10, 11 Funai 28, 29 GE 04 Goldstar 24 Hitachi 06 Instant Replay 04 JC Penney 04, 06, 24, 30 JVC 15, 41, 42 Kenwood 14, 15 Lloyds 29 Magnavox 04, 05, 08 Magnin 31 Marantz 30 Memorex 04, 10, 24, 29 Minolta 06 Mitsubishi 17, 18, 39, 40 Montgomery Ward 02, 43 Multitech 29 NEC 15, 22, 30 Panasonic 04, 44 Pentax 05, 06 Philco 04, 05 Philips 04, 05, 08 Quasar 04 RCA 06, 07, 33 Realistic 01, 02, 10, 24 Samsung 23, 31 Sanyo 14, 10 Scott 20 Sears 06, 11, 24 Sharp 01, 02, 03 Shintom 36 Sony 12, 13, 38 Sound Design 29 Sylvania 04, 05, 08 Symphonic 29 Tatung 15 Teac 15, 29 Teknika 27, 29 Thomas 29 TMK 21 Toshiba 19, 20 Video Concepts 30 Yamaha 15, 29, 30 Zenith 16

REMOTE CONTROL

CODE NUMBER

Operation of Universal Remote Control (Continued)

POWER

TV POWER

REMOTE

KEYPAD

POWER

(DVD/VCR)

CATV TV

DVD VCR

DISPLAY INPUT

FLASHBACK

ENTER

PERSONAL PREFERENCE

ABCD

VOL

–

MENU MUTEg SKIP

POWER (DVD/VCR)

;

PLAY

REW

STOP

(

PAUSE

TV • CATV • VCR • DVD

VCR-CH

FWD

)

VOL

321 654 987

100

REC

CATV/DVD-TV/VCR

INPUT DISPLAY

CHANNEL UP (,)/ DOWN(9)

• How to identify a DVD

The remote control may already be set to operate your DVD. Try this initial check before going on to the following “identify” section.

(1) Press (2) Point remote towards DVD and press

(3) Does the remote turn the DVD ON and OFF?

(1) Press (2) Press and hold down

(3) Within ten seconds after releasing

CATV/DVD

button.

POWER

(DVD/VCR)

• If yes, the remote is ready to operate the DVD and no further steps are needed.

• If no, continue to the “identify” section.

Setting Method

Refer to the following steps and list to quickly find the remote control code for your accessory DVD.

• First look up your DVD’s remote control code number before going through the Setting Method.

CATV/DVD

(9)

on your remote control.

button.

INPUT

and

CH DOWN

Then release both buttons.

INPUT

CH DOWN (9)

, enter your DVDs two-digit

remote control code number using

KEYPAD

(refer to list).

and

REMOTE

• The remote control is now ready to send

commands to your DVD.

DVD BRAND

Denon 02 JVC 09 Magnavox 04 Marantz 04 Mitsubishi 06 Panasonic 02 Philips 04 Pioneer 08 Proscan 03 RCA 03 Samsung 07 Sharp 01, 10 Sony 05 Toshiba 04 Yamaha 02 Zenith 04

REMOTE CONTROL

CODE NUMBER

Note:

Depending on the model, year produced, brand, and type of DVD, some models may not be compatible with the remote control.

Operation of Universal Remote Control (Continued)

POWER

TV POWER

REMOTE

KEYPAD

CATV TV

DVD VCR

DISPLAY INPUT

FLASHBACK

ENTER

100

PERSONAL PREFERENCE

ABCD

VOL

–

MENU MUTEg SKIP

POWER (DVD/VCR)

REW

(

;

VCR-CH

PLAY

STOP

PAUSE

TV • CATV • VCR • DVD

VOL

FWD

)

CATV/DVD-TV/VCR

321 654 987

REC

DISPLAY

CHANNEL UP (,)/ DOWN(9)

• How to identify a cable converter

Setting Method

Refer to the following steps and list to quickly find the remote control code for your cable TV converter.

• First look up your converter’s remote code number before going through the Setting Method below.

(1) Press (2) Press and hold down

(3) Within ten seconds after releasing

CATV/DVD

(9)

on your remote control.

button.

DISPLAY

and

CH DOWN

Then release both buttons.

DISPLAY

and

CH DOWN (9)

digit code number using

, enter your converter’s two-

REMOTE KEYPAD

(refer to list).

• The remote control is now ready to send commands to your converter.

• Some brands have more than one remote code listed due to changes in the remote codes from early to later model years. In such cases, you may have to try more than one code to find the code your converter accepts.

Note:

Depending on the model, year produced, brand, and type of CATV converter, some models may not be compatible with the remote control.

CATV CONVERTER REMOTE CONTROL

BRAND CODE NUMBER

Anvision 07, 08 Cable Star 07, 08 Eagle 08 General Instrument 04, 05, 15, 23, 24, 25,

Jerrold 04, 05, 15, 23, 24, 25,

Magnavox 07, 08, 19, 25, 28, 29,

Oak Sigma 18 Panasonic 27, 39 Philips 07, 08, 19, 26, 28, 29,

Pioneer 18, 20 Randtek 07, 08 RCA 27, 43 Scientific Atlanta 03, 22, 42 Sony 44 Viewstar 07, 08, 19, 26, 28, 29,

Zenith 14

30, 36

32, 33, 40, 41

Before Calling for Service

Check these items and see if you can correct the trouble with a slight adjustment of the controls.

QUICK SERVICE

CHECK LIST

PROBLEM

No Playback of VCR and Disc

Player

No Picture or Sound from

External Video/Audio Products

Remote Control Doesn’t Work

Bars on Screen

Picture Distorted

Picture Rolls Vertically

No Color

Poor Reception on Some

Channels

Weak Picture

Lines or Streaks in Picture

Ghosts in Picture

Picture Blurred

Sound OK, Picture Poor

Picture OK, Sound Poor

No Picture or Sound

Dark and Blank Picture

External Electrical Noise

Interfering with TV’s Operation

Color on Part of the Screen

POSSIBLE REMEDY

Try a new channel, if OK, then there is possible station trouble.

Is TV plugged in? Power at outlet? XX X Is TV’s POWER button on? XX Is antenna connected to terminal

on the back of the set? If outside antenna is being used,

check for broken wire. Check for local interference or

external electrical noise. Turn off with POWER button and

then turn it on after about a minute. Adjust COLOR control. X Adjust PICTURE control. XX Check external Video/Audio

products: look for loose/broken connection leads. (Refer to page 38 ~ 39)

Check batteries of Remote Control. X Press TV/VCR button on the

remote to select TV mode. Are audio cables connected firmly?

Check the volume level. Is SPEAKER ON? See page 15 ~ 16. X Change CLOSED CAPTION mode

to “OFF” / ENERGY SAVE mode to X “OFF”.

Unplug the TV and plug it in again after two minutes or longer.

X X XXX

XX X X X XX XXXX

XXX X X X

XXXX X XXXXX X

XXXXXXX X

X XXXX XXXXX X

Appears Distored

Note:

• When viewing in TEXT mode, if no TEXT broadcast is being received,

the screen may become dark and blank. Should this occur, set the CLOSED CAPTION mode to “OFF”.

(Dark and Blank Picture)

Calling for Service

For location of the nearest Sharp Authorized Servicer, or to obtain product literature accessories, supplies, or customer assistance, please call 1-800-BE-SHARP.

Specifications

MODEL 20F650 Receiving System NTSC Stereo Broadcast MTS/SAP Reception Channels

AIR VHF 2-13 ch

UHF 14-69 ch

CATV 1-125 ch Channel Tuning 181-channel Reception PLL tuning system Antenna Input Impedance VHF/UHF 75 ohm Unbalanced Screen Size 20˝ Diagonally Measured

(Visible Area) (50.8 cm) Terminals Audio/Video input × 2 (Front x 1, Rear x 1),

Sound Output 2.5 W (RMS) × 2 Power Source AC 120 V, 60 Hz Power Consumption 88 W Dimensions 2325/64˝ × 181/2˝ × 195/64˝

(W) x (H) x (D) [594 mm × 470 mm × 485 mm] Weight (approx.) 56.2 lbs. (25.5 kg)

• Design and specifications are subject to change without notice.

COMPONENT-IN × 1 (Rear), Audio Output × 1 (Rear)

(ESPAÑOL)

Lea estas instrucciones cuidadosamente y consérvelas a la mano para consultarlas en el futuro.

IMPORTANTE

Sírvase anotar el modelo del televisor y los números de serie en el espacio provisto, para ayudar a reportar en caso de pérdida o robo. Los números están ubicados en la parte posterior del televisor.

N° de modelo :

N° de serie :

INFORMACIÓN IMPORTANTE

Existen dos razones importantes para registrar dentro del plazo límite la garantía de su nuevo televisor SHARP, mediante la TARJETA DE REGISTRO incluida con el aparato.

PRIMERA – GARANTÍA

Garantiza al cliente la recepción inmediata de todas las prestaciones de consumidor en c’uanto a piezas, servicio técnico y mano de obra aplicable a su adquisición.

SEGUNDA – ACTA DE SEGURIDAD DE PRODUCTOS DE CONSUMIDOR

Con el fin de garantizar al cliente la recepción puntual de cualquier notificación de seguridad sobre inspección, modificación o cancelación que se le pueda solicitar a SHARP bajo el Acta de seguridad de productos de consumidor de 1972. LEA CUIDADOSAMENTE LA CLÁUSULA “GARANTÍA LIMITADA” DE LA ÚLTIMA PÁGINA.

ADVERTENCIA:

PRECAUCIÓN : PARA REDUCIR EL RIESGO DE

DESCARGAS ELÉCTRICAS, NO RETIRE LA

CUBIERTA (NI EL PANEL POSTERIOR).

NO CONTIENE PIEZAS REPARABLES POR EL

USUARIO.

SOLICITE ASISTENCIA TÉCNICA A PERSONAL DE

SERVICIO TÉCNICO ESPECIALIZADO.

“Nota para el instalador del sistema de TV por cable: Esta nota tiene el propósito de llamar la atención del instalador del sistema de cable acerca del Artículo 820-40 del Código Eléctrico Nacional, que contiene las directrices para la puesta a tierra y, en particular, especifica que el cable de puesta a tierra debe estar conectado al sistema de puesta a tierra del edificio lo más cerca a la entrada del cable.”

ADVERTENCIA - Las Normas de la FCC establecen que cualquier cambio o modificación no autorizada que se realice en este equipo y que no esté expresamente aprobado por el fabricante podría anular la autoridad del usuario para utilizar este equipo.

DESECHO DEL PRODUCTO

Este producto utiliza un Tubo de rayos catódicos (TRC) que contiene soldadura de estaño y plomo. El desecho de estos materiales deberá ser considerando regulaciones ambientales. Para obtener información sobre el desecho o el reciclado, póngase en contacto con las autoridades locales o con Electronics Industries Alliance: www.eiae.org

PARA REDUCIR EL RIESGO DE INCENDIO O DESCARGA ELÉCTRICA, NO EXPONGA ESTE APARATO A LA HUMEDAD.

El relámpago con cabeza de flecha dentro de un triángulo trata de indicar al usuario que las partes dentro del producto representan riesgo de electrochoque para las personas.

El signo de exclamación dentro de un triángulo trata de indicar al usuario que las instrucciones importantes de operación y servicio se encuentran en los documentos con el aparato.

INFORMACIÓN IMPORTANTE (Continuación)

PRECAUCIÓN:

• No coloque el cable de alimentación de CA debajo del televisor u otro elemento pesado.

• Para impedir un incendio, no ponga nunca ningún tipo de vela o llama al descubierto encima o cerca del

televisor.

• Para impedir un incendio o una descarga eléctrica, no exponga este aparato al goteo ni a las salpicaduras. Tampoco deberán ponerse encima de los productos objetos llenos de líquidos como, por ejemplo, floreros.

MEDIDAS DE SEGURIDAD IMPORTANTES

PRECAUCIÓN: Lea por favor todas estas instrucciones antes de poner en funcionamiento

su televisor, y guárdelas para poder utilizarlas en el futuro.

La energía eléctrica permite realizar muchas funciones útiles. Este aparato ha sido diseñado y fabricado para garantizar su seguridad física. Sin embargo, UNA UTILIZACIÓN INAPROPIADA PODRÍA SER LA CAUSA DE DESCARGAS ELÉCTRICAS O INCENDIOS. Para mantener el buen funcionamiento de este equipo y evitar problemas, siga las normas básicas indicadas a continuación cuando lo instale, utilice o repare.

1. Desenchufe el televisor del tomacorriente antes de limpiarlo.

2. No utilice líquidos ni aerosoles de limpieza. Para limpiar el televisor utilice un paño húmedo.

3. No utilice accesorios que no los recomiende el fabricante del televisor porque podrían causar peligros.

4. No utilice el televisor cerca del agua – por ejemplo, cerca de una bañera, lavado, fregadero o lavadora, en un sótano húmedo, cerca de una piscina, etc.

5. No utilice este televisor sobre un carrito, un soporte o una mesa inestables. El televisor podría caerse causando serías heridas a niños o adultos, y, por supuesto, el aparato se estropearía. Ponga el televisor solamente sobre un carrito o soporte recomendado por el fabricante, o vendido junto con el televisor.

6. La combinación de carrito y televisor debe moverse con mucho cuidado. Las paradas rápidas, la fuerza excesiva y las superficies irregulares pueden ser la causa de que la combinación de televisor y carrito se volteen.

7. Cuando instale el televisor en una pared o en una estantería siga las instrucciones del fabricante, y utilice el kit de montaje aprobado por el fabricante.

8. Las ranuras y aberturas de la caja y del panel posterior o inferior sirven para la ventilación del aparato, para que éste funcione bien y para evitar que se caliente. Estas aberturas no deben taparse nunca. Este televisor no debe colocarse en un lugar cerrado (como un estante para libros) si éste no dispone de la ventilación apropiada.

9. Las aberturas no deben taparse nunca con un paño u otro material; y las aberturas del panel inferior no deben taparse tampoco colocando el televisor sobre una cama, sofá, alfombra u otra superficie similar. Este televisor no debe ponerse nunca cerca o encima de un radiador u otro aparato que produzca calor.

10. Este televisor sólo debe funcionar con la fuente de corriente indicada en la etiqueta del fabricante. Si no está seguro acerca del tipo de corriente de su hogar, póngase en contacto con el concesionario de quien adquirió el televisor o con la compañía eléctrica local.

En el caso de equipos de televisión diseñados para funcionar con baterías, consulte las instrucciones de uso.

11. Como medida de seguridad, el equipo de televisión está equipado con un enchufe polarizado de dos hilos. El enchufe polarizado de dos hilos solamente calza de una sola manera en el tomacorriente.

Si el enchufe no entra en el tomacorriente, pídale a un electrícista que le coloque un tomacorriente nuevo. No modifique el enchufe porque anulará esta característica de seguridad.

12. No permita que se apoye nada sobre el cable de alimentación. No ponga este televisor donde el cable pueda ser deformado por personas que caminen sobre él.

MEDIDAS DE SEGURIDAD IMPORTANTES

(Continuación)

13. Cumpla con todos los avisos y las instrucciones marcados en el televisor.

14. Si se conecta una antena exterior al televisor, asegúrese de que el sistema de antena esté conectado a tierra para obtener cierta protección ante los aumentos de voltaje y la acumulación de cargas estáticas. La sección 810 del Código Eléctrico Nacional ofrece información relacionada con la conexión a tierra correcta del poste y la estructura de apoyo, la conexión a tierra del cable de entrada a una unidad de descarga, el tamaño de los conductores de conexión a tierra, la ubicación de la unidad de descarga de antena, la conexión a los electrodos de conexión a tierra, y los requisitos para el electrodo de conexión a tierra.

EJEMPLO DE CONEXIÓN A TIERRA DE LA

ANTENA SEGÚN EL CÓDIGO ELÉCTRICO NACIONAL

CABLE DE ENTRADA DE ANTENA

ABRAZADERA DE CONEXIÓN A TIERRA

UNIDAD DE DESCARGA DE ANTENA

EQUIPO DE SERVICIO ELÉTRICO

NEC - CÓDIGO ELÉCTRICO NACIONAL

(NEC SECCIÓN 810-20)

CONDUCTORES DE CONEXIÓN A TIERRA (NEC SECCIÓN 810-21)

ABRAZADERAS DE CONEXIÓN A TIERRA

SISTEMA DE CONEXIÓN A TIERRA DEL ELECTRODO DE SERVICIO ELÉCTRICO (NEC ART. 250, APARTADO H)

15. Para proteger aún más este televisor durante tormentas eléctricas o cuando se deje sin atender y sin utilizar durante largos periodos de tiempo, desenchufe el cable de alimentación del tomacorriente y desconecte la antena. Esto evitará que el aparato pueda estropearse debido a los relámpagos y la sobretensión en la línea de alimentación.

16. Un sistema de antena exterior no debe ubicarse cerca de líneas de alimentación elevadas, ni cerca de luces eléctricas o circuitos de alimentación. Tampoco debe ubicarse donde pueda caer sobre tales líneas o circuitos de alimentación. Cuando instale un sistema de antena exterior, tenga muchísimo cuidado para no tocar las líneas o circuitos de alimentación porque el contacto podría causar un accidente mortal.

17. No sobrecargue los tomacorrientes ni los cables de extensión porque esto podría causar un incendio o descarga eléctrica.

18. No meta nunca ningún objeto en el interior del televisor porque podría tocar piezas con alta tensión o causar un cortocircuito con otras piezas causando un incendio o descarga eléctrica. No derrame nunca ningún tipo de líquido sobre el televisor.

19. No trate de reparar el televisor usted mismo porque al abrir o quitar las tapas podría exponerse a una descarga de tensión u otros peligros. Las reparaciones debe realizarlas el personal de servicio CALIFICADO.

20. Desenchufe este televisor del tomacorriente y solicite el servicio de un técnico calificado cuando se produzcan las condiciones siguientes: A. Cuando el cable de la alimentación o el enchufe estén estropeados. B. Cuando haya derramado un líquido sobre el televisor. C. Si el televisor ha quedado expuesto a la lluvia o al agua. D. Si el televisor no funciona normalmente siguiendo las instrucciones de utilización. Ajuste solamente los

controles indicados en las instrucciones de utilización. Un ajuste inadecuado de otros controles podría estropear el aparato y, entonces, sería necesario acudir a un técnico CALIFICADO para que éste lo

repare y lo devuelva a su condición normal. E. Si el televisor se ha caído o la caja se ha estropeado. F. Cuando las prestaciones del televisor cambien considerablemente será necesario llamar al servicio de

reparaciones.

21. Al finalizar cualquier servicio o reparación de este televisor, pida al técnico de servicio que realice comprobaciones de seguridad rutinarias para determinar si el televisor puede funcionar sin causar ningún problema.

22. Cuando sea necesario cambiar piezas, cerciórese de que el técnico de servicio utiliza las piezas de CAMBIO especificadas por el fabricante, aquellas que tengan las mismas características que las piezas originales. Las piezas de recambio no autorizadas pueden causar incendios, descargas eléctricas u otros peligros.

Referencia rápida de los controles de operación

• Nombres de los Componentes (ESPAÑOL)

Panel Delantero

ALIMENTACION (POWER)

Pulsando → Enciende (On). Pulsando nuevamente → Apaga (Off).

SENSOR DE CONTROL REMOTE

MENU (MENU)

Pulsando → Accede al MENU PRINCIPAL. Pulsando nuevamente → Sale del MENU PRINCIPAL.

AUMENTO/DISMINUCION DEL VOLUMEN (VOL)

(+) Aumenta el sonido. (–) Disminuye el sonido.

CANAL SUPERIOR/INFERIOR

(8) Selecciona el siguiente canal superior. (9) Selecciona el siguiente canal inferior.

Para abrir la puerta

Utilizando el saliente situado debajo de la indicación “PULL-OPEN”, tire de la puerta y levántela para abrirla.

Para cerrar la puerta

Utilizando el saliente, baje la puerta hasta que se cierre.

Precaución:

• Cuando abra o cierre la puerta, no inserte los dedos en la ranura entre la puerta y el panel frontal. Esto podria producirle una lesión.

TERMINALES

IN 2 DE

ENTRADA VIDEO/AUDIO IN 2

(POR DENTRO DE LA PUERTA)

Panel Posterior

TERMINAL DE ENTRADA DE ANTENA/TV POR CABLE

COMPONENT

IN 1

COMPONENT

LINE

OUT

AUDIO

VIDEO

IN 1

LINE

OUT

AUDIO

VIDEO

TERMINALES LINE OUT

TERMINALES IN 1

TERMINALES DE VÍDEO COMPONENTE

Referencia rápida de los controles de operación (Continuación)

• Nombres de los Componentes

Funciones Basicas Del Control Remoto

ALIMENTACION (POWER)

Pulsando → Enciende (On). Pulsando nuevamente → Apaga (Off).

TECLADO A DISTANCIA (REMOTE KEYPAD)

Para tener acceso a cualquier canal empleando las teclas.

RETORNO AL CANAL ANTERIOR (FLASHBACK)

Para volver al canal anterior.

PREFERENCIAS PERSONALES

Con los botones Personal Preference puede programar sus programas favoritos utilizando las cuatro categorías A, B, C y D. Puede acceder a los canales rápidamente utilizando estos botones. (Consulte la página 33)

AUMENTO/DISMINUCION DEL VOLUMEN (VOLUME UP/DOWN)

(+) Aumenta el sonido. (–) Disminuye el sonido.

• En modo de MENU cambia o selecciona el ajuste del televisor.

PREPARACION (MENU)

Pulsando → Accede al MENU PRINCIPAL. Pulsando nuevamente → Sale del MENU PRINCIPAL.

SILENCIAMIENTO (MUTE)

Pulsando → Silencia el sonido. Pulsando nuevamente → Restaura el sonido.

• CLOSED CAPTION aparece automáticamente cuando el sonido es silenciado. Siempre y cuando la transmisión tenga esta señal.

ALIMENTACION (DVD/VCR) [POWER (DVD/VCR)]

Pulsando → Enciende (On). Pulsando nuevamente → Apaga (Off).

CONTROLES DEL DVD/VIDEO

Consulte la página 41.

REC

POWER

MENU MUTEg SKIP

POWER (DVD/VCR)

CATV

DVD VCR

DISPLAY

INPUT

PLAY

PAUSE

STOP

VCR-CH

FWD

)

ENTER

100

VOL

FLASHBACK

PERSONAL PREFERENCE

ABCD

VOL

;

–

REW

(

TV • CATV • VCR • DVD

321 654 987

REC

Ventanilla del transmisor de infrarrojos

Botones DE TELEVISOR/ TV POR CABLE (TV-CATV)

Pulse TV/VCR, el mando envia los comandos de alimentación y selección de canales (botones de canal superior/ inferior y de acceso aleatorio) a un televisor. Pulse CATV/DVD, envia los comandos de alimentación y selección de canales a un convertidor de TV por cable.

VISUALIZACION (DISPLAY)

Pulsando → Aparece el canal de recepción por cuatro segundos. Pulsando nuevamente → Elimina la visualización.

• En el modo de “Closed Caption” se muestra el canal de recepción por un corto tiempo.

ENTRADA (INPUT)

Pulsando → Cambia al modo de entrada 1 del vídeo externo o al modo. Pulsando 2 veces → Cambia al modo de entrada 2 del vídeo externo. Pulsando 3 veces → Vuelve al modo TV original. Consulte la página 39.

INTRODUCIR (ENTER)

Se utiliza en algunos casos en los cuales una Caja de Inversor de Cable requiere una orden “enter” después de seleccionar los canales, al usar el teclado a distancia. (Consulte la página 41)

CANAL SUPERIOR/INFERIOR (CHANNEL UP/DOWN)

(8) Selecciona el siguiente canal

superior.

(9) Selecciona el siguiente canal

inferior.

• Consulte las páginas 30 ~ 32 para obtener información sobre el preajuste de canales.

• En el modo de MENU, mueve la marca “ a ”.

SKIP/VCR-CH

Nota:

• Los botones que arriba pueden verse sombreados en el Control Remoto lucen en la oscuridad. Para usar el visor del control remoto que luce en la oscuridad, colocarlo bajo una luz fluorescente u otra fuente luminosa.

• El material fosforescente no contiene elementos radiactivos ni tóxicos, de modo que su uso no representa ningún peligro.

• El grado de iluminación variará de acuerdo con la potencia de la luz utilizada.

• El grado de iluminación irá decayendo con el tiempo y dependiendo de la temperatura.

• El tiempo necesario para cargar el visor fosforescente variará de acuerdo con la iluminación

circundante.

• La luz del sol y la luz fluorescente son las más eficaces para la carga del visor.

Antes de llamar al servicio de reparaciones

Verifique estos puntos para ver si usted mismo puede solucionar el problema.

LISTA DE

COMPROBACIONES

DE SERVICIO

RAPIDO

POSIBLE SOLUCIÓN

Pruebe con otro canal y si todo está bien, el problema puede ser de la emisora.

Está conectado el televisor? Llega electricidad al tomacorrientes?

Está conectado el interruptor POWER del televisor?

Está conectado la antena al terminal del panel posterior del televisor?

Si utiliza una antena exterior, cerciórese de que el cable no esté dañado.

Compruebe si hay interferencia local. Desconecte el interruptor POWER y

vuelva a conectarlo después de transcurrir un minuto.

Ajuste el control de COLOR. Ajuste el control de MATIZ. Verifique los productos externos de Video/

Audio, revise si hay conexiones sueltas o rotas. (Ver pág. 38 ~ 39)

Compruebe el estado de las pilas del mando a distancia.

Deslice CATV/DVD-TV/VCR selector para situarlo sobre la posición TV.

Están bien conectados los cables de sonido? Compruebe el nivel del volumen.

Está conectado el altavoz? Ver pág. 15 ~ 16.

Desactive (OFF) el modo CLOSED CAPTION / Desactive (OFF) el modo AHORRO DE ENERGÍA (Energy Save).

Desenchufe el televisor y vuelva a enchufarlo despúes de dos minutos o más.

Nota:

• Cuando se ve en modo TEXTO sin recibir emisiones de TEXTO, la pantalla puede ponerse en blanco y negro. Si ocurriera ésto, ponga el modo CLOSED CAPTION en OFF.

ágenes

PROBLEMA

El vídeo o el reproductor de discos de

video no reproducen im

El equipo de video/audio externo no

produce imágenes ni sonido

El mando a distancia no funciona

Barras en la pantalla

Imagen distorsionada

La imagen se desplaza verticalmente

No hay color

Mala recepción de algunos canales

Imagen débil

XX X X X XX X XXX

XX X

XXX X X X

XXXXXXXXXX X

XX X XX XX X

XX XXX

X XXXX XXXXX X

Franjas en la imagen

Imagen fantasma

Imagen borrosa

Sonido adecuado, imagen mala

Imagen adecuada, sonido malo

Imagen oscura y en blanco

con el funcionamento del televisor

Interferencia de ruido eléctrico externo

No hay imagen ni sonido

El color se ve distorsionado en parte

de la pantalla

(Imagen oscura y en blanco)

Solicitud de servicio técnico

Para la localización del Servicio Técnico Autorizado de Sharp más próximo o para conseguir material de información, repuestos o asistencia técnica, llame a 1-800-BE-SHARP.

(FRANÇAIS)

Lisez attentivement ces instructions et gardez-les à proximité pour toute référence ultérieure.

IMPORTANT

Afin de vous aider en cas de perte ou de vol, inscrivez les numéros de série et de modèle du téléviseur dans les espaces fournis à cet effet. Ces numéros sont situés à l’arrière du téléviseur.

N° du modèle :

N° de série :

INFORMATIONS IMPORTANTES

Deux raisons importantes d’enregistrer rapidement la garantie de votre nouveau téléviseur SHARP à l’aide de la carte d’enregistrement (REGISTRATION CARD) incluse dans le colis :

LA PREMIERE – LA GARANTIE

Grâce à elle, vous obtiendrez immédiatement les avantages client concernant la garantie des pièces, du service et des travaux applicable à votre achat.

LA DEUXIEME – LA LOI SUR LA SECURITE DU PRODUIT DE CONSOMMATION (CONSUMER PRODUCT SAFETY ACT)

Grâce à elle, vous recevrez rapidement un avis de sécurité lors du contrôle, de la modification ou du rappel de votre produit que SHARP peut être amené à fournir conformément à la loi de 1972 sur la sécurité du produit de consommation. LISEZ ATTENTIVEMENT LE PARAGRAPHE «GARANTIE LIMITEE» DE LA DERNIÈRE PAGE.

AVERTISSEMENT:

ATTENTION :

NE RETIREZ PAS LE CAPOT (OU LE PANNEAU ARRIERE).

L’APPAREIL NE CONTIENT AUCUNE PIECE A ENTRETENIR

CONSULTEZ UN PERSONNEL QUALIFIE POUR

“Note à l’intention de l’installateur du système CATV : Ce rappel est fourni afin d’attirer l’attention de l’installateur de système CATV sur l’article 820-40 du National Electrical Code qui indique les règles de mise à la terre appropriée et, en particulier, spécifie que la ligne de terre doit être connectée au réseau commun de mise à la terre du bâtiment, au point le plus proche possible de la source.”

AVERTISSEMENT - Les réglementations FCC établissent que des changements ou des modifications non autorisés sur cet équipement et non approuvés expressément par le fabricant peuvent annuler tout pouvoir de l’utilisateur sur le fonctionnement de cet équipement.

MISE AU REBUT DU PRODUIT

Ce produit utilise un tube à rayons cathodiques (TRC) contenant du plomb à braser et du brasage tendre. La mise au rebut de ces matières peut être réglementée pour des raisons environnementales. Pour toute information sur la mise au rebut ou le recyclage, contactez les autorités locales ou les précautions importantes préconisées par la société Electronics Industries Alliance sur : www.eiae.org.

POUR REDUIRE LE RISQUE

D’ELECTROCUTION,

PAR L’UTILISATEUR.

LA MAINTENANCE.

POUR REDUIRE LE RISQUE D’INCENDIE OU D’ELECTROCUTION, N’EXPOSEZ PAS CET EQUIPEMENT A DES ENDROITS TRES HUMIDES.

Le symbole de la foudre sous forme de flèche dans un triangle est supposé indiquer à l’utilisateur que les pièces internes au produit constituent un risque d’électrocution.

Le symbole du point d’exclamation dans un triangle est supposé indiquer à l’utilisateur que des instructions de fonctionnement et de maintenance importantes se trouvent dans la documentation fournie avec l’équipement.

INFORMATIONS IMPORTANTES (Suite)

ATTENTION:

• Ne placez pas le cordon d’alimentation sous le téléviseur ou sous tout autre objet lourd.

• Ne placez pas le bougies ni de flammes nues sur le téléviseur ou à sa proximité, afin d’éviter les incendies.

• Veillez à ne pas éclabousser ni faire tomber de l’eau sur ces appareils afin d’éviter les incendies ou les électrocutions. Ne placez jamais d’objets remplis de liquide, comme des vases, sur ces appareils.

PRÉCAUTIONS IMPORTANTES

ATTENTION: Veuillez lire toutes ces instructions avant d’utiliser votre télévision et conservez-

les pour un usage ultérieur.

L’énergie électrique peut exécuter de nombreuses fonctions utiles. Cet appareil a été conçu et fabriqué de façon à garantir votre entière sécurité. CEPENDANT, TOUTE UTILISATION INADEQUATE PEUT ENTRAINER DES RISQUES D’ELECTROCUTION OU D’INCENDIE. Afin de ne pas détruire les protections intégrées à cet appareil, respectez les règles de base suivantes pour son installation, son utilisation et sa maintenance.

1. Débranchez la télévision avant de la nettoyer.

2. N’utilisez pas de nettoyants liquides ou d’aérosols et utilisez un chiffon humide.

3. N’utilisez pas d’accessoires déconseillés par le fabricant de matériel vidéo, car ils impliquent des risques.

4. N’utilisez pas cette télévision à proximité d’eau — par exemple, près d’une baignoire, d’un lavabo, d’un évier ou d’un bac à laver, dans une cave humide ou près d’une piscine, etc.

5. Ne placez pas cet équipement sur un chariot, un support ou une table instable. La télévision peut tomber et provoquer de graves lésions à toute personne et causer de sérieux dommages à l’équipement. Utilisez uniquement un support ou un chariot recommandé par le fabricant ou vendu avec la télévision.

6. L’ensemble télévision-chariot doit être déplacé délicatement. Les arrêts brusques, une force excessive et des surfaces inégales peuvent renverser l’ensemble.

7. L’installation au mur ou sur une tablette doit être réalisée conformément aux instructions du fabricant et à l’aide d’un kit de montage approuvé par ce dernier.

8. Les fentes et les ouvertures du châssis à l’arrière ou dans la partie inférieure sont prévus pour la ventilation. Pour garantir un fonctionnement fiable de la télévision et pour la protéger de toute surchauffe, ces ouvertures ne doivent être ni obturées, ni recouvertes. La télévision ne doit pas être placée dans un endroit encastré tel qu’une bibliothèque, sauf si une ventilation adéquate est prévue.

9. Les ouvertures ne doivent jamais être recouvertes par un chiffon ou autre et celles de la partie inférieure ne doivent jamais être obturées si vous placez la télévision sur un lit, un sofa, un tapis ou toute surface similaire. Cette télévision ne doit être placée ni à proximité d’un radiateur ou d’un registre de chaleur, ni dessus.

10. Cette télévision doit être alimentée uniquement par le type d’alimentation électrique indiqué sur l’étiquette. Si vous n’êtes pas sûr du type d’alimentation de votre domicile, consultez votre revendeur de télévision ou la compagnie d’électricité locale (EDF en France).

Pour la télévision conçue pour fonctionner sur batterie, reportez-vous au mode d’emploi.

11. Du point de vue de la sécurité, la télévision est équipée d’une fiche polarisée à 2 fils (une lame plus impor tante que l’autre). La fiche polarisée à 2 fils ne pénètre dans la prise électrique que dans un seul sens.

Si la fiche ne correspond pas à la prise, demandez à votre électricien de remplacer la prise, elle doit être obsolète. Ne modifiez pas la fiche et ne désactivez pas cette fonction de sécurité.

12. Ne posez rien sur le cordon d’alimentation. Ne placez pas la télévision dans un emplacement où le cordon d’alimentation est susceptible d’être endommagé par le passage répété de personnes.

PRÉCAUTIONS IMPORTANTES (Suite)

13. Respectez tous les avertissements et instructions mentionnés sur la télévision.

14. Si une antenne extérieure est raccordée à la télévision, veillez à ce que le système d’antenne soit relié à la terre de façon à fournir une protection vis-à-vis des poussées de tension et des charges électrostatiques accumulées. La section 810 du National Electrical Code fournit des informations relatives à une mise à la terre correcte de la potence et de la structure portante, à une mise à la terre du fil d’entrée à une unité de décharge d’antenne, aux dimensions des conducteurs de terre, à l’emplacement de l’unité de décharge d’antenne, au raccordement des prises de terre ainsi qu’à leurs exigences.

EXEMPLE DE MISE A LA TERRE D’UNE ANTENNE

SELON LE CODE NATIONAL DE L’ÉLECTRICITÉ

DESCENTE D’ANTENNE

COLLIER DE MISE À LA TERRE

UNITÉ DE DÉCHARGE D’ANTENNE

BOÎTIER DE LA COMPAGNIE D’ÉLECTRICITÉ

NEC - CODE NATIONAL DE L’ÉLECTRICITÉ

15. Pour tout ajout de protection à votre télévision en cas de foudre ou lorsque elle reste en veille et inutilisée pendant de longues périodes, débranchez-la et déconnectez l’antenne. Vous éviterez ainsi des dommages à votre équipement suite à la foudre et des poussées de tension.

16. Un système d’antenne extérieure ne doit pas être situé à proximité de lignes aériennes ou d’autres groupes électrogènes ou circuits électriques ou dans des emplacements où l’antenne pourrait tomber sur ce type de lignes ou circuits. Lors de l’installation d’un système d’antenne extérieure, faites extrêmement attention à ne pas entrer en contact avec ces lignes ou circuits, car cela pourrait vous être fatal.

17. Ne surchargez pas les prises et les prolongateurs de ligne afin d’éviter tout risque d’incendie ou d’électrocution.

18. N’introduisez jamais d’objets à travers les fentes du châssis, car ils pourraient entrer en contact avec des points de tension dangereux ou des pièces court-circuitées et provoquer ainsi un incendie ou une électrocution. Ne répandez jamais de liquides sur la télévision.

19. N’essayez pas de réparer vous-même votre télévision. L’ouverture ou le retrait des capots peut vous exposer à une tension dangereuse ou à d’autres risques. Confiez toutes les opérations de maintenance à un personnel qualifié.

20. Lorsque vous êtes confronté aux situations suivantes, débranchez la télévision et confiez toutes les opérations de maintenance à un personnel qualifié : A. Lorsque le cordon d’alimentation ou la fiche est endommagé ou effiloché ; B. Si du liquide a été répandu sur/dans la télévision ; C. Si la télévision a été exposée à la pluie ou à l’eau ; D. Si la télévision ne fonctionne pas normalement même en respectant le mode d’emploi. Réglez uniquement

les commandes abordées par le mode d’emploi. Des réglages inappropriés d’autres commandes peuvent occasionner des dommages et nécessiteront ensuite, dans la plupart des cas, une intervention plus

importante d’un technicien qualifié pour que la télévision fonctionne normalement ; E. Si la télévision a été renversée ou que le châssis est endommagé ; F. Lorsque la télévision présente une altération visible des performances — cela indique un besoin de

maintenance.

21. Pour toute maintenance ou réparation de la télévision, demandez au technicien de réaliser des contrôles de sécurité classiques afin de déterminer si la télévision est en bon état de marche.

22. Lorsqu’un remplacement de pièces se révèle nécessaire, veillez à ce que le technicien utilise des pièces de rechange spécifiées par le fabricant et qu’elles aient les mêmes caractéristiques que la pièce d’origine. Des remplacements non autorisés peuvent occasionner un incendie, une électrocution ou d’autres risques.

(NEC SECTION 810-20)

CONDUCTEURS DE TERRE (NEC SECTION 810-21)

COLLIERS DE MISE À LA TERRE

ÉLECTRODE DE TERRE DE LA COMPAGNIE D’ÉLECTRICITÉ (NEC ART. 250, PARTIE H)

Référence rapide sur les commandes

• Nomenclature (FRANÇAIS)

Panneau Avant

ALIMENTATION (POWER)

Appuyer → Pour mettre sous tension. Appuyer de nouveau → Pour mettre hors tension.

CAPTEUR DE TÉLÉCOMMANDE

RÈGLAGE (MENU)

Appuyer → Accès au MENU PRINCIPAL. Appuyer de nouveau → Sortie du MENU PRINCIPAL.

AUGMENTATION/RÉDUCTION DU VOLUME SONORE (VOL)

(+) Pour augmenter le volume du son.

CANAL HAUT/BAS

(8) Sélectionne le canal supérieur suivant. (9) Sélectionne le canal inférieur précédent.

(–) Pour diminuer le volume du son.

Pour ouvrir le volet

A l’aide de la saillie située sous l’indication “PULL-OPEN”, tirez et soulevez pour ouvrir le volet.

Pour fermer le volet

A l’aide de la saillie, rabaissez le volet jusqu’à ce qu’il se ferme.

Attention:

• Lors de l’ouverture ou de la fermeture du volet, n’introduisez pas les doigts dans la fente entre la porte et le panneau avant sous peine de provoquer un accident.

ENTREE VIDEO

IN 2

G-AUDIO-D

(DERRIÉRE LE VOLET)

Panneau Arrière

PRISE D’ENTRÉE ANTENNE/ CÂBLE

COMPONENT

IN 1

COMPONENT

LINE

OUT

AUDIO

VIDEO

IN 1

LINE

OUT

AUDIO

VIDEO

PRISES LINE OUT

PRISE D’ENTRÉE IN 1

PRISE POUR APPAREIL VIDÉO

Référence rapide sur les commandes (Suite)

• Nomenclature

Fonctions de base de la télécommande

ALIMENTATION (POWER)

Appuyer → Pour mettre sous tension. Appuyer de nouveau → Pour mettre hors tension.

PAVE NUMERIQUE DE COMMANDE A DISTANCE (REMOTE KEYPAD)

Sélectionne directement le canal voulu sur le pavé numérique.

RETOUR (FLASHBACK)

Rappelle le canal regardé précédent.

PREFERENCES PERSONNELLES

Grâce aux touches de préférence personnelle, vous pouvez programmer vos programmes préférés à l’aide des 4 catégories: A, B, C et D. Ces touches vous permettent d’accéder rapidement à ces canaux. (Voir page 33)

AUGMENTATION/RÉDUCTION DU VOLUME SONORE (VOLUME UP/DOWN)

(+) Pour augmenter le volume du son. (–) Pour diminuer le volume du son.

• Pour changer ou sélectionner les réglages du téléviseur en mode menu.

RÉGLAGE (MENU)

Appuyer → Accès au MENU PRINCIPAL. Appuyer de nouveau → Sortie du MENU PRINCIPAL.

SOURDINE (MUTE)

Appuyer → Mise en sourdine du son. Appuyer de nouveau → Rétablissement du son.

• CLOSED CAPTION apparaît lorsque le son est mis en sourdine.

ALIMENTATION (DVD/VCR) [POWER (DVD/VCR)]

Appuyer → Pour mettre sous tension. Appuyer de nouveau → Pour mettre hors tension.

COMMANDE DU LECTEUR DE DVD/MAGNÉTOSCOPE

Voir page 41.

REC

POWER

MENU MUTEg SKIP

POWER (DVD/VCR)

CATV

DVD VCR

DISPLAY

INPUT

PLAY

STOP

PAUSE

VCR-CH

FWD

)

ENTER

100

VOL

FLASHBACK

PERSONAL PREFERENCE

ABCD

VOL

;

–

REW

(

TV • CATV • VCR • DVD

321 654 987

REC

Fenêtre d’émission du signal infrarouge

Touches DE MODE DE CÂBLOVISION/ DVD-TÉLÉVISION/MAGNÉTOSCOPE (CATV/DVD-TV/VCR)

Appuyer sur la touche télévision/ magnétoscope (TV/VCR), permet de mettre le téléviseur et le magnétoscope sous/hors tension et de sélectionner ses canaux (touche de canaux en ordre croissant/décroissant et d’accès direct). Appuyer sur la touche câblovision/DVD (CATV/DVD), permet de mettre un convertisseur de téléviseur par câble et un lecteur de DVD sous/hors tension et de sélectionner ses canaux.

AFFICHAGE (DISPLAY)

Appuyer → Pour afficher le canal reçu pendant quatre secondes. Appuyer de nouveau → Pour faire disparaître le canal.

• Pour afficher temporairement le canal reçu en mode Sous-titres.

ENTRÉE (INPUT)

Appuyer → Pour sélectionner le mode ENTRÉE 1 vidéo externe ou le mode COMPOSANT. Appuyer 2 fois → Pour sélectionner le mode ENTRÉE 2 vidéo externe. Appuyer 3 fois → Pour revenir au mode TV initial. Voir page 39.

ENTRER (ENTER)

Parfois utilisée lorsqu’un convertisseur nécessite l’introduction d’une commande “enter” après la sélection de canaux à l’aide du pavé numérique de commande à distance. (Voir page 41)

TOUCHES DES CANAUX CROISSANT/ DÉCROISSANT (CHANNEL UP/DOWN)

(8) Sélectionne le canal supérieur

suivant.

(9) Sélectionne le canal inférieur

précedént.

• Voir pages 30 ~ 32 pour prérégler les canaux.

• Déplace le curseur “ a ” sur l’écran du MENU.

SKIP/VCR-CH

Remarque:

• Les boutons ombrés de la télécommande illustrés ci-dessus brillent dans l’obscurité lorsque la télécommande a été placée sous une ampoule fluorescente ou toute autre source lumineuse.

• Le matériau phosphorescent n’est absolument pas toxique ou radioactif. Il peut donc être utilisé en toute sécurité.

• Le degré d’illumination variera en fonction de l’intensité de la source d’éclairage.

• Le degré d’illumination diminuera avec le temps, en fonction de la température.

• Le temps requis pour charger les touches phosphorescentes dépendra de l’éclairage environnant.

• Les rayons directs du soleil et les luminaires fluorescents constituent les meilleures sources de chargement des touches phosphorescentes.

Avant d’appeler un réparateur

Vérifier les points suivants afin de déterminer s’il est possible de remédier au problème par un simple réglage des commandes.

LISTE DES

VÉRIFICATIONS

POUR UN

DÉPANNAGE

RAPIDE

SOLUTION POSSIBLE

Essayer un nouveau canal. S’il fonctionne, il s’agit probablement d’une panne de la chaîne.

Le téléviseur est-il branché? La prise secteur fonctionne-t-elle?

L’interrupteur POWER du téléviseur est-il sous tension?

L’antenne est-elle raccordée aux bornes à l’arrière de l’appareil?

Si l’antenne extérieure est utilisée, s’assurer qu’il n’y a pas de fils sectionnés.

Vérifier s’il n’y a pas d’interférence locale ou de bruit électrique extérieur.

Mettre l’interrupteur POWER hors tension puis de nouveau sous tension au bout d’une minute.

Régler la commande de COULEUR. Régler la commande de CONTRASTE. Vérifier l’appareil vidéo/audio externe:

s’assurer que les câbles de connexion ne sont pas desserrés ou cassés. (Se reporter à la page 38 ~ 39)

Vérifier les piles de la télécommande. Appuyez sur la touche TV/VCR de la

télécommande pour sélectionner le mode TV. Les câbles audio sont-ils fermement

connectés? Vérifier le niveau du volume. Les haut-parleurs fonctionnent-ils?

Voir pages 15 ~ 16. Mettre le mode sous-titrage hors service

“ARRÊT” / Mode d’économie d’énergie sur “ARRÊT”.

Débrancher le téléviseur et le rebrancher après deux minutes.

Remarque:

• En mode TEXTE, s’il n’y a pas d’émission TEXTE à recevoir, l’écran du téléviseur pourrait être sombre et vide. Dans ce cas, placer le mode Sous-titrage hors service.

PROBLEM

Pas de reproduction d’un magnéto-

scope ou lecteur de disque

Pas d’image ou de son d’un appareil

vidéo/audio externe

La télécommande ne fonctionne pas

Barres sur l’écran

Distorsion de l’image

L’image défile verticalement

Pas de couleur

Faible réception de certains canaux

Image affaiblie

Lignes ou rayures dans l’image

Images fantômes

Image brouillée

Son normal, image médiocre

XX X X X XX XXXX

XX X

XXX X X X

XXXXXXXXXX X

XXXXXXX X

X X XXX

X XXXX XXXXX X

Image normale, son médiocre

Ni son, ni image

Image sombre et vide

Bruit électrique extérieur interférant

avec le fonctionnement du téléviseur

Couleur sur une partie de l’écran

semble altérée

(Image sombre et vide)

Appel au service après-vente

Pour connaître l’emplacement du centre de service après-vente agrée Sharp le plus proche ou pour obtenir de la documentation sur les produits, des accessoires, des consommables ou une aide au consommateur, appelez le 1-800-BE-SHARP.

Limited Warranty

CONSUMER LIMITED WARRANTY

SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.

This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in design or construction.

In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer.

The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp.

The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion of incidental or consequential damages, so that above exclusion may not apply to you.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

Model Specific Section Your Product Model Number & Description: 20F650, 20 inch Color Television

Warranty Period for this Product: One (1) year parts and 90 days labor. The warranty

Additional Item(s) Excluded from Non-rechargeable batteries. Warranty Coverage (if any): Where to Obtain Service: From a Sharp Authorized Servicer located in the

What to Do to Obtain Service: Contact your Sharp Authorized Servicer to obtain

TO OBTAIN ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP OR VISIT www.sharp-usa.com

(Be sure to have this information available when you need service for your Product.)

period continues for an additional one (1) year, for a total of two (2) years, with respect to the picture tube(s) in the Product for parts only. Labor and service are not provided free of charge for this additional period.

United States. To find the location of the nearest Sharp Authorized Servicer, call Sharp toll free at 1-800-BE-SHARP.

in-home service for this Product. The Servicer will come to your home and if it is necessary to remove the Product, the Servicer will reinstall it. Be sure to have Proof of Purchase available.

Sharp 20F650 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual