Page 1
Manual for use with
Page 2
MVM
X-Tatic S7
Sound Control Unit (SCU)
Detachable microphone
Optical connection cable (S/PDIF)
Microphone connection cable for Xbox
®
360 (3.5 mm jack > 2.5 mm jack)
USB2.0 Y cable (2x type A > type B)
Stereo connection cable (3.5 mm jack > 3.5 mm jack)
Stereo extension cable (3.5 mm plug > 3.5 mm jack)
G6 adapter cable (G6 > USB2.0 A and 2x 3.5 mm connectors)
E
F
G
H
I
Package contents
1
Page 3
MVM
MVM
Basic information
Getting started
Microphone on / off and Microphone Voice Monitoring
Connection for Xbox
®
360 microphone
Microphone volume controller
Volume adjustment controller
Amplifier on/off switch
USB connector (for power and PS3™/PC microphone)
Optical audio input (S/PDIF)
Switch between optical and analog input
Analog audio input
ON/OFF switch for 3D stereo function
SCU power on/off button
Volume +
Volume Dolby
®
Headphone button
X-Tatic S7 headphone connector (G6)
Analog output for speakers or non S7 headset
(3.5 mm jack)
Power/Source LED
Dolby
®
ProLogic IIx® on/off LED
Dolby
®
Headphone on/off LED
Gaming/Music mode LED
Locate and align the markings on both the headset and the microphone.
Plug the microphone into the microphone connector.
Turn the microphone to the front to lock it.
2
Page 4
MVM
with SCU
Required parts for PC
Cabling
Remove the
protective caps!
Optical connection
cable (S/PDIF)
USB2.0 Y cable (2x type A > type B)
Sound Control Unit (SCU)
3
Always connect the main USB connector
of the USB2.0 Y cable!
In case a single USB port of the connected
device does not provide sufficient power,
please also connect the supplementary
USB connector of the USB2.0 Y cable.
Page 5
MVM
without SCU
Required parts for PC
G6 adapter cable
(G6 > USB2.0 A and
2x 3.5 mm connectors)
In case the USB port of your notebook
does not provide sufficient power,
please switch off the amplifier function.
Switching off the amplifier will cause a
noticeable decrease of the maximum volume!
Using the G6 adapter cable will disable
the microphone volume controller!
Cabling
4
Page 6
with other stereo headsets
Required parts for PC
Remove the
protective caps!
Optical connection
cable (S/PDIF)
USB2.0 Y cable (2x type A > type B)
Sound Control Unit (SCU)
Stereo extension cable
(3.5 mm plug > 3.5 mm jack)
Cabling
5
Page 7
SCU settings
SCU LED indications
Press 1x: Dolby® Headphone Gaming mode
Press 2x: Dolby
®
Headphone Music mode
Press 3x: Dolby
®
Headphone off
Dolby
®
Digital 5.1 Input
Dolby
®
Headphone Output
Stereo Input
Dolby
®
Headphone Output
Gaming mode Music mode
Gaming mode Music mode
Stereo bypass
Stereo bypass
6
Page 8
PC sound settings
Choose SPDIF out as Standard Output Device. If available, set “Dolby® Digital Live 5.1” as output format.
Inside your system's sound settings define the USB microphone as input device. Please pay attention to the microphone level, as this level may be set to zero by default
under Windows 7.
If you are facing any failures using the microphone function via USB we recommend to check your operating system’s audio settings and to define the soundcard as output
device and the USB microphone as input device.
Important notes
Avoid listening at a high volume level for a longer period of time. Doing so may harm your hearing.
Dolby, Pro Logic, the double-D symbol and the respective images/logos are registered trademarks or trademarks of Dolby
Laboratories.
PlayStation, PlayStation 3, PS3 and the respective images/logos are registered trademarks or trademarks of Sony
Computer Entertainment Inc.
Xbox, Xbox 360, Xbox Live, Windows 7, Microsoft and the respective images/logos are registered trademarks or
trademarks of Microsoft Corporation in the U.S. and/or other countries.
All named products and descriptions are trademarks and/or registered trademarks of the respective manufacturers and
are accepted as protected.
As a continuing policy of product improvement at SHARKOON, the design and specifications are subject to change
without prior notice. National product specifications may vary.
All rights reserved especially (also in extracts) for translation, reprinting, reproduction by copying or other technical
means. Infringements will lead to compensation.
All rights reserved especially in case of assignation of patent or utility patent. Means of delivery and technical
modifications reserved.
Disposal of your old product
Your product is designed and manufactured with high quality materials
and components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product, it
means the product is covered by the European Directive 2002/96/EC.
Please be informed about the local separate collection system for
electrical and electronic products.
Please act according to your local rules and do not dispose of your old
products with your normal household waste. The correct disposal of
your old product will help prevent potential negative consequences to
the environment and human health.
© SHARKOON Technologies 2012
www.sharkoon.com
7
Loading...