Sharkoon TG5 Pro RGB User Manual
HIGHLY LUMINOUS
With the TG5 Pro RGB, we've given one of our classics a thorough upgrade. Three 120 mm addressable RGB
fans illuminate nearly the whole surface of the front panel and lend the TG5 Pro RGB an incomparable look of
radiance. The side panel, which is entirely made of tempered glass, puts the installed hardware into focus,
while the cables, power supply and data drives are inconspicuously concealed.
8-PORT ADDRESSABLE RGB
5V
D G
5VD G
5V
D G
RGB SW
+
-
5V
D G
CONTROLLER
The TG5 Pro RGB comes with a preinstalled addressable RGB controller. With compatible mainboards,
this will function as a hub for controlling and synchronizing up to
eight addressable LED components, which will illuminate in up
to 16.8 million colors. The controller is connected to the power
supply via a SATA connector and
to a mainboard via a 4-pin or 3-pin
header for addressable LEDs with
the pinout: 5V-D-coded-G or
5V-D-G.
SATA
Addressable RGB LED Fans/ Strips
5V
D G5VD G
5V
D G5VD G5VD G5VD G
Addressable RGB LED Fans/ Strips
or
V D G
VDG
+5V D G
D G5VD G
Mainboard Addressable
RGB Pin Header
5V
MANUAL COLOR CONTROL
The TG5 Pro RGB also has a manual color control function for mainboards which do not have headers
for addressable LED components. With this, the RGB controller is not connected to the mainboard, but
rather connected to the power supply and the reset switch of the PC case. The switch’s reset function
is then replaced with a new function which allows up to twenty lighting modes to be cycled through
and selected, or, if desired, the lighting can be turned o.
Yellow Cyan Pink
RGB
RGB
Mode 6
Mode 7
RGB
Mode 5
RGB
Mode 4
RGB
Mode 1
RGB
Mode 2
RGB
Mode 3
RGB
Mode 9
Blue White
RGB
Mode 8
RGB
Mode 13
RGB
Mode 12
RGB
Mode 11
Red Green
RGB
Mode 10
SATA
Addressable RGB LED Fans/ Strips
5V
D G5VD G
5V
D G5VD G5VD G5VD G
Addressable RGB LED Fans/ Strips
D G5VD G
5V
+
RGB SW
-
Loading...