Shark VC200, UM200, VM200 User Manual

VACMOP™

Cordless Hard Floor System

VC200/UM200/VM200 Series

OWNER’S GUIDE

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT.

If the charging cord plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT force into outlet or try to modify to fit.

WARNING

To reduce the risk of fire, electric shock, injury, or property damage:

When using an electrical appliance, basic precautions should always be followed, including the following:

THIS PRODUCT CONTAINS ELECTRICAL CONNECTIONS:

1.Use only as described in this manual. DO NOT use the VACMOP™ for any purpose other than those described in this manual.

2.These components contain electrical connections, electrical wiring, and moving parts that potentially present risk to the user.

3.Before each use, carefully inspect all parts for any damage. If a part is damaged, discontinue use.

4.Use only identical replacement parts.

5.This VACMOP contains no serviceable parts.

6.DO NOT immerse or spray water on the body of the VACMOP. To clean the surface, wipe with a dry cloth.

7.Keep the appliance and its charging cord out of reach of children. DO NOT allow the appliance to be used by children.

Do not allow to be used as a toy. Close supervision is necessary when used near children.

GENERAL USE

8.This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way

and understand the hazards involved. Cleaning and user maintenance shall not be made by children. Always turn off the VACMOP before connecting or disconnecting any current carrying hoses, chargers, batteries, or other electrical or mechanical parts.

9.DO NOT handle plug or VACMOP with wet hands.

10.DO NOT use without VACMOP disposable pad attached.

11.Only use Shark® branded VACMOP disposable pads.

12.DO NOT put any objects into VACMOP base. DO NOT use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.

13.DO NOT use if VACMOP base airflow is restricted. If the air paths or the

VACMOP base become blocked, turn the VACMOP off. Remove all obstructions before you turn on the unit again.

14.Keep all VACMOP base openings away from hair, face, fingers, uncovered feet, or loose clothing.

15.DO NOT use if VACMOP is not working as it should, or has been dropped, damaged, left outdoors, or dropped into water.

16.Use extra care when cleaning on stairs.

17.DO NOT place VACMOP on unstable surfaces such as chairs or tables.

18.DO NOT use to pick up:

a)Large quantities of dust (including drywall, fireplace ash, or embers).

b)Smoking or burning objects (hot coals, cigarette butts, or matches)

c)Flammable or combustible materials (lighter fluid, gasoline, or kerosene)

d)Toxic materials (chlorine bleach, ammonia, or drain cleaner)

19.DO NOT use in the following areas:

a)Poorly lit areas

b)Outdoor areas

c)Spaces that are enclosed and may contain explosive or toxic fumes or vapors (lighter fluid, gasoline, kerosene, paint, paint thinners, mothproofing substances, or flammable dust)

20.Release all operational triggers on the VACMOP before plugging in or unplugging the charger.

21.Release all operational triggers on the VACMOP before any adjustment,

cleaning, maintenance or troubleshooting.

22.DO NOT modify or attempt to repair the VACMOP or the battery yourself, except as indicated in this manual.

DO NOT use the battery or VACMOP if it has been modified or damaged. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.

23.Always release all operational triggers on this appliance before attaching or detaching a VACMOP disposable pad.

BATTERY

24.The battery is the power source for the VACMOP. Carefully read and follow all charging instructions.

25.To prevent unintentional starting,

DO NOT carry the appliance with your finger on the trigger or spray button.

26.Use only Shark® standard replacement charger. Use of an incorrect charger may result in no charging, and/or unsafe conditions. A charger that is suitable for one type of battery may create a risk of fire when used with another battery.

27.Keep the battery away from all metal objects such as paper clips, coins, keys, nails, or screws. Shorting the battery terminals increases the risk of fire or burns.

28.Under abusive conditions, liquid may be ejected from the battery. Avoid contact with this liquid, as it may cause

irritation or burns. If contact occurs, flush with water. If liquid contacts eyes, seek medical help.

29.Battery should not be stored at temperatures below 37.4°F (3°C) or above 104°F (40°C) to maintain longterm battery life.

30.DO NOT charge battery at temperatures below 40°F (5°C) or above 104°F (40°C). Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.

31.Store the appliance indoors. DO NOT use or store it below 37.4°F (3°C). Ensure the appliance is at room temperature before operating.

32.DO NOT expose the battery to fire or temperatures above 265°F (130°C) as it may cause explosion.

33.Not for wet pickup.

34.Use only Shark brand cleaning fluids.

SAVE THESE INSTRUCTIONS

sharkclean .com

sharkclean .com

ASSEMBLY

Your VACMOP™ unit comes partially assembled with a cord connecting the parts. All versions assemble the same way. This appliance is for Household use only.

1.Align and insert the Handle into the top of the Pole. You will feel it click in place.

2.Align and insert the pole into the Main Body. You will feel it click in place.

For proper operation, ensure all components are completely connected and clicked into place.

Handle

1. (Click)

Pole

2. (Click)

Main

Body

Spray

Button

LED

Indicator

Spray

Nozzle

Disposable

Pad Release

Hanging

Loop

Vacuum

Trigger

Reservoir

Lid

Charging

Connector

NOTE: The model and serial numbers can be found on the QR code label on the back on the main body.

CHARGING THE LI-ION BATTERY

STANDARD CHARGER	STANDARD CHARGING CONNECTOR
Plug charger into an electrical outlet.	Plug the charger into the port on the back of the
	main body.

CONTROLS

		Spray Button
		Press and hold the spray button on top of the handle to
		dispense cleaning solution through the spray nozzle.
	Spray Button	Vacuum Trigger
		To vacuum, pull the trigger and hold it in.

Vacuum Trigger

VACUUM TRIGGER AND SPRAY BUTTON

sharkclean .com

sharkclean .com