Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.
UPLIGHT™ CORDED
LIFT-AWAY® VACUUM
QUICK START GUIDE
|
WHAT’S INSIDE |
||
A Lift-Away® Pod |
|
E Duster Crevice Tool |
|
B Wand |
|
F Pet Multi-Tool |
|
C Floor Nozzle |
|
G MultiFLEX® Under |
|
D Accessory Holder |
Appliance Wand |
||
H Self-Cleaning Pet Power Brush |
|||
|
|
ASSEMBLY
Attach the accessory holder
(D) onto the wand and place accessories on the holder.
D E F
A
B |
(Click) |
(Snap)
G H
Lift the floor nozzle tube,
pushing it firmly until it stands upright, then insert
the wand into the tube.
(Click)
C
NOTE: For proper operation, ensure all parts are firmly CLICKED into place.
TIPS
When storing, wrap cord |
When the vacuum is placed |
around cord hooks. |
in the upright position, |
For quick cord access, |
the retractable wheels will |
rotate upper hook down |
extend so the vacuum |
and remove cord. |
can stand up on its own. |
EMPTYING THE DUST CUP
Empty the dust cup after each use.
MAINTENANCE:
Rinse pre-motor filters every month and HEPA filter once a year.
Rinse with cold water only. Allow filters to air-dry completely before reinstalling.
See enclosed Owner’s Guide for more information on how to clean and replace the filters.
clean
Keep the Lift-Away pod attached to the wand while emptying the dust cup.
BRUSHROLL MAINTENANCE
Brushroll access
The self-cleaning brushroll automatically removes hair wrap. If some hair or debris remains after continued use, remove the cover to access the brushroll. Use
a coin to turn the locks counterclockwise, then lift off the cover. Remove any debris or hair wrap and clear the debris intake.
To close, push down the cover until it clicks into place, then turn the locks clockwise.
Soft Roller
Slide the button on the floor nozzle to eject the Soft Roller. Tap off debris and wipe the roller clean with a dry towel.
QU602Q_Series_QSG_REV_Mv1
VERSATILE FLOOR-TO-CEILING CLEANING
UPRIGHT
Step on the footprint icon on the floor nozzle and tilt the handle back, then press the power button on the back of the handle.
Power Button
Step on Nozzle
WAND WITH EXTENDED HOSE
For even more flexibility with the wand, slide the hose cuff down to extend the integrated hose.
NOTE: When finished with the hose, slide the hose cuff back into place while reattaching the wand to the pod.
ABOVE-FLOOR WITH WAND
For more reach, detach the wand and add an accessory. Step on the wand release pedal and lift the handle.
LIFT-AWAY® POD WITH HOSE
To clean with the Lift-Away pod, detach it by pressing the Pod Release button. Attach an accessory for more reach. For added flexibility, slide the cuff down to extend the hose. To reattach the hose, slide the hose cuff back into place.
NOTE: During reassembly, ensure the hose is clicked securely into place before attaching the wand.
OR
For additional parts and accessories, visit sharkaccessories.com
For questions or to register your product, visit us online at sharkclean.com
@sharkcleaning