Shark NV602UK Instruction Manual

Corded Upright Vacuum with Lift-Away™ Technology
NV602UK Series
INSTRUCTIONS
sharkclean.co.uk
THANK YOU
for purchasing the Shark® Corded Upright Vacuum with Lift-Away™ Technology�
CONTENTS
TIP: You can find
the model and serial numbers on the QR code label located on the back of your unit.
TIP: You can locate the date code on one of the prongs of the power cordplug.
REGISTER YOUR PURCHASE
TO BENEFIT FROM YOUR PRODUCT'S EXTENDED GUARANTEE, SIMPLY REGISTER YOUR PURCHASE AT:
sharkclean.co.uk/register-guarantee
+44 (0)800 862 0453
Scan QR code using mobile device
Please note, products purchased directly from Shark are automatically registered.
Benefits of registering your product and creating an account:
Get easier, faster product support and access to
guarantee information
Access troubleshooting and product care instructions
Be among the first to know about exclusive product
promotions
RECORD THIS INFORMATION
Model Number: ______________________________
Serial Number _______________________________
Date Code: __________________________________
Date of Purchase (Keep receipt): ________________
Store of Purchase: ____________________________
Important Safety Instructions � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �4
Getting to Know Your Shark® Lift-Away™ � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6
Assembly � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 8
Power Cord � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �9
Settings � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10
Brush-Roll Indicator Light� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10
Cleaning Modes � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 11
Emptying the Dust Cup � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 12
Cleaning the Filters � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 13
Cleaning the Brush Roll � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 13
Checking for Blockages � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 14
Avalible accessories � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 15
Troubleshooting Guide � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 16
Guarantee Terms and Conditions � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 17
2
TECHNICAL SPECIFICATIONS
Voltage: 220-240V~, 50-60Hz
Body Motor Watts: 750W
Nozzle Watts: 80W
PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE�
This instruction manual is designed to help you get a complete understanding of your new Shark Corded Upright Vacuum with Lift-Away™ Technology�
If you have any questions, please call the customer service line on +44 (0)800 862 0453�
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material sources. To return your used device, please use the return and collection systems or contact the retailer where this product was purchased. They can take this product for environmental safe recycling.
3
IMPORTANT SAFETY INSTRUCTIONS
FOR HOUSEHOLD USE ONLY • PLEASE READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM�
SAVE THESE INSTRUCTIONS
SAVE THESE INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
READ ALL INSTRUCTIONS BEFORE USE
IF YOU HAVE DELICATE OR WOOL CARPETS, PARTICULARLY LOOP PILE, PLEASE TRY THE VACUUM ON A HIDDEN AREA FIRST TO ENSURE THE SPINNING BRUSH-ROLLS DO NOT DAMAGE OR UNPICK CARPET FIBRES�
WARNING
REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, INJURY, OR PROPERTY DAMAGE:
GENERAL WARNINGS
1 Your vacuum cleaner may consist of
a motorised nozzle, wand, hose, and/ or vacuum pod. This device contains electrical connections, electrical wiring, and moving parts that potentially present risk to the user.
2 Use only identical replacement parts.
3 Carefully observe and follow the
instructions provided below to avoid improper use of the appliance. DO NOT use the vacuum for any purpose other than those described in this manual.
4 Before use, carefully inspect all parts
for any damage. DO NOT use if any parts are damaged.
5 The use of an extension cord is NOT
recommended.
6 CAUTION: This vacuum cleaner handle
contains electrical connections. This vacuum contains no serviceable parts.
USE WARNINGS
7 This appliance can be used by persons
with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
8 DO NOT allow the appliance to be
used by children. Keep the appliance
and its cord out of reach of children. Do not allow to be used as a toy. Close supervision is necessary when used near children. Cleaning and user maintenance shall not be done by children.
9 Always turn o the vacuum cleaner
before connecting or disconnecting any motorised nozzles or other accessories.
10 DO NOT handle plug or vacuum cleaner
with wet hands.
11 DO NOT use without filters in place.
12 If you have delicate or wool carpets,
particularly loop pile, turn the spinning brush-roll o by selecting the Hard Floor setting when cleaning these surfaces as the bristles have the potential to damage or unpick carpet fibres.
13 DO NOT damage the power cord:
a) DO NOT pull or carry vacuum cleaner
by the cord or use the cord as a handle.
b) DO NOT unplug by pulling on cord.
Grasp the plug, not the cord.
c) DO NOT run the vacuum cleaner
over the power cord, close a door on the cord, pull the cord around sharp corners, or leave the cord near heated surfaces.
14 Only use Shark branded filters and
accessories. Use of non-Shark parts may invalidate your guarantee.
15 DO NOT put any objects into nozzle
or accessory openings. DO NOT use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
16 DO NOT use if nozzle or accessory
airflow is restricted. If the air paths or the motorised floor nozzle become blocked, turn the vacuum cleaner o and unplug from electrical outlet. Remove all obstructions before you plug in and turn on the unit again.
17 Keep nozzle and all vacuum openings
away from hair, face, fingers, uncovered feet, or loose clothing.
18 DO NOT use if vacuum cleaner
is not working as it should, or has been dropped, damaged, left outdoors, or dropped into water.
19 If the supply cord is damaged, it
must be replaced by the manufacturer, its service agent or similar qualified persons in order to avoid a hazard.
20 Use extra care when cleaning
on stairs.
21 DO NOT leave the vacuum cleaner
unattended while plugged in.
22 When powered on, keep the vacuum
cleaner moving over the carpet surface at all times to avoid damaging the carpet fibres.
23 DO NOT place vacuum cleaner
on unstable surfaces such as chairs or tables.
24 Your Shark
designed to stand up on its own. When taking a break from cleaning, you may need to lean it against furniture or a wall, or lay it flat on the floor. Using the vacuum for an application where the unit lacks stability may result in personal injury.
25 DO NOT use to pick up:
a) Liquids
b) Large objects
c) Hard or sharp objects
d) Large quantities of dust (drywall dust,
e) Smoking or burning objects (hot coals,
f) Flammable or combustible materials
g) Toxic materials (chlorine bleach,
vacuum may not be
(glass, nails, screws, or coins)
fireplace ash, or embers). DO NOT use as an attachment to power tools for dust collection.
cigarette butts, or matches)
(lighter fluid, gasoline, or kerosene)
ammonia, or drain cleaner)
26 DO NOT use in the following areas:
a) Poorly lit areas
b) Wet or damp surfaces
c) Outdoor areas
d) Spaces that are enclosed and may
contain explosive or toxic fumes or vapors (lighter fluid, gasoline, kerosene, paint, paint thinners, mothproofing substances, or flammable dust)
27 Turn o all controls before plugging
in or unplugging the vacuum.
28 Unplug from electrical outlet when
not in use and before any maintenance or cleaning.
29 Hand wash with water only. Washing
with cleaning chemicals could damage the unit.
30 During cleaning or routine maintenance,
DO NOT cut anything other than hair, fibres, or string wrapped around the brush-roll.
31 Allow all filters to air-dry completely
before replacing in the vacuum to prevent liquid from being drawn into electric parts.
32 Make sure the dust cup and all filters
are in place after routine maintenance.
33 If provided, secure the power cord around
the two cord hooks during storage.
SAVE THESE INSTRUCTIONS
4
5
GETTING TO KNOW YOUR SHARK® CORDED UPRIGHT
Wand
Release
VACUUM WITH LIFT-AWAY™ TECHNOLOGY�
WELCOME!
Congratulations on your purchase. Use this instruction manual to learn about your new vacuum’s great features. From assembly to use to maintenance, you will find it all in here.
6
MAIN UNIT
A Suction Control Slider
B Handle
C Hose
D Handle Release Button
E Power Switch
F Wand Release Button
G Wand
H Dust-Cup Release Latch
I Lift-Away™ Pod
J Dust-Cup Empty Buttons
K Lower Cord Hook
L Lift-Away™ Food Pedal
M Motorised Floor Nozzle
N Headlights
O Brush-roll indicator light
A
B
C
E
F
H
I
J
K
O
N
D
G
M
L
7
Loading...
+ 7 hidden pages