Shark ION RV760 Series Owner's Manual

Robot
Vacuum

RV760 Series

OWNER’S GUIDE

TM

ION

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY

If the charging cable plug does not fit fully into the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. DO NOT force into outlet or try to modify to fit.

WARNING

To reduce the risk of fire, electric shock, injury, or property damage:

GENERAL WARNINGS

1. Robotic vacuum cleaner consists of a

robotic vacuum and charging dock with
power supply. These components contain
electrical connections, electrical wiring,

QUICK

and moving parts that potentially present
risk to the user.

START

2. Before each use, carefully inspect all
parts for any damage. If a part is damaged,
discontinue use.

GUIDE

3. Use only identical replacement parts.

4. This robotic vacuum cleaner contains no

serviceable parts.

5. Use only as described in this manual.
DO NOT use the robotic vacuum cleaner

for any purpose other than those
described in this manual.

6. With the exception of filters, DO NOT
expose any parts of the robotic vacuum
cleaner to water or other liquids.

USE WARN INGS

7. This appliance can be used by children

aged from 8 years and above and persons
with reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning
use of the appliance in a safe way and
understand the hazards involved.
a) Children shall not play with the

b) Cleaning and user maintenance shall

8. Always turn o the robotic vacuum

appliance.

not be made by children without
supervision.

cleaner before inserting or removing the
filter or dust bin.

9. DO NOT handle plug, charging dock,
charging cable, or robotic vacuum
cleaner with wet hands. Cleaning and
user maintenance shall not be made by
children without supervision.

10. DO NOT use without dust bin and filters
in place.

11. Only use Shark® branded filters and
accessories. Failure to do so will void
the warranty.

12. DO NOT damage the charging cord:

a) DO NOT pull or carry charging

dock by the cord or use the cord as
a handle.

b) DO NOT unplug by pulling on cord.

Grasp the plug, not the cord.

c) DO NOT close a door on the cord,

pull the cord around sharp corners,
or leave the cord near heated
surfaces.

13. DO NOT put any objects into nozzle or
accessory openings. DO NOT use with
any opening blocked; keep free of dust,
lint, hair, and anything that may reduce
air flow.

14. DO NOT use if robotic vacuum cleaner
airflow is restricted. If the air paths
become blocked, turn the vacuum
cleaner o and remove all obstructions
before turning on the unit again.

15. Keep nozzle and all vacuum openings
away from hair, face, fingers, uncovered
feet, or loose clothing.

16. DO NOT use if robotic vacuum cleaner
is not working as it should, or has been
dropped, damaged, left outdoors, or
dropped into water.

17. DO NOT place vacuum cleaner on
unstable surfaces.

18. DO NOT use to pick up:
a) Liquids
b) Large objects
c) Hard or sharp objects (glass, nails,

screws, or coins)

d) Large quantities of dust (drywall

dust, fireplace ash, or embers).
DO NOT use as an attachment to
power tools for
dust collection.

e) Smoking or burning objects (hot

coals, cigarette butts, or matches)

f) Flammable or combustible

materials (lighter fluid, gasoline,
or kerosene)

g) Toxic materials (chlorine bleach,

ammonia, or drain cleaner)

19. DO NOT use in the following areas:
a) Wet or damp surfaces
b) Outdoor areas
c) Spaces that are enclosed and may

contain explosive or toxic fumes
or vapors (lighter fluid, gasoline,
kerosene, paint, paint thinners,
mothproofing substances, or
flammable dust)

20. Turn o the robotic vacuum cleaner
before any adjustment, cleaning,
maintenance or troubleshooting.

21. Allow all filters to air-dry completely
before replacing in the robotic vacuum
cleaner to prevent liquid from being
drawn into electric parts.

22. DO NOT modify or attempt to repair the
robotic vacuum cleaner or the battery
yourself, except as indicated in this
manual. DO NOT use the vacuum if it has
been modified or damaged.

BAT T E RY U S E

23. The battery is the power source for

the vacuum. Carefully read and follow
all charging instructions.

24. To prevent unintentional starting, ensure
the vacuum is powered o before picking
up or carrying the vacuum. DO NOT
carry the appliance with your finger on
the power switch.

25. Use O N LY the Shark® charging docks
RVDOK850 or RVDOK85OWV and use
only battery RVBAT850. Use of batteries
or battery chargers other than those
indicated may create a risk of fire.

26. Keep the battery away from all metal
objects such as paper clips, coins, keys,
nails, or screws. Shorting the battery
terminals together increases the risk of
fire or burns.

27. Under abusive conditions, liquids may be
ejected from the battery. Avoid contact
with this liquid, as it may cause irritation or
burns. If contact occurs, flush with water. If
liquid contacts eyes, seek medical help.

28. Robotic vacuum cleaner should not be
stored, charged, or used at temperatures
below 50°F (10°C) or above 104°F
(40°C). Ensure the battery and vacuum
have reached room temperature before
charging or use. Exposing the robot
or battery to temperatures outside of
this range may damage the battery and
increase the risk of fire.

29. DO NOT expose the robotic vacuum cleaner
or battery to fire or temperatures above
265°F (130°C) as it may cause explosion.

30. Non-rechargeable batteries cannot
be recharged.

SAVE THESE INSTRUCTIONS

For additional warnings, go to sharkclean.com/robothelp

sharkclean.comsharkclean.com

ABOUT THE SHARK IONTM ROBOT ABOUT THE SHARK IONTM ROBOT

With Auto-Sense Navigation, your robot uses an array of sensors to navigate around walls, furniture legs,

Charge Indicator Lights

Error Indicator Light Wi-Fi Indicator Light

and other obstacles while it cleans. The robot may gently bump into obstructions or linger in one spot, and
it may not cover every area in a single cleaning. For best results, prepare your home as indicated below,
and schedule a daily cleaning to ensure all floor areas are regularly maintained.

Front Bumper

Dock Button

Side Brush Side Brush

Charging Contact

Side Brush Post

!

Clean

Dock Max

Dust Bin Release Button

Cli Sensors

Clean Button

Max Button

Power Button

Front Caster Wheel

Robot Traps Robot Friendly

CORDS AND OBSTRUCTIONS

Before cleaning, clear away cords and other
obstructions or block o the area with the included

BotBoundary® Strips.

LOW-CLEARANCE FURNITURE

To prevent your robot from becoming trapped,
use furniture risers or BotBoundar y strips.

Battery Door

Drive Wheel

Side Cli
Sensor

Multi-Surface Brushroll

Dust Bin and Filter

DOORWAY THRESHOLDS

Your robot may have some trouble clearing some
high thresholds. Block o high thresholds with
BotBoundary strips.

RETURNING TO DOCK

If your robot roams too far, it could have trouble
finding the Charging Dock. It may be helpful to
block o part of your home with BotBoundary
strips, or to add a second dock (available at
sharkaccessories.com).

sharkclean.comsharkclean.com

PREPARING FOR USE

CHARGING THE SHARK IONTM ROBOT

INSTALLING THE SIDE BRUSHES CHARGING

Snap the 2 included Side Brushes onto the square
posts on the bottom of the robot.

CHARGING DOCK SET-UP

IM P O RTAN T: The Shark Robot has a pre-installed rechargeable battery. Battery must be fully charged before using.

To charge, the Power button on the side of the robot
must be in the ON position (I).

When the cleaning cycle is complete, or if the batter y
is running low, the robot will search for the dock .
If your robot doesn’t return to the dock, its charge
may have run out.

3 ft.

3 ft.

5 ft.

Place the charging dock on a level sur face with its back against a wall, in a space without obstructions, that
can easily be accessed by your robot. Remove any objects that are closer than 3 feet ( 1 meter) from either
side of the dock, or closer than 5 feet (1.52 meters) from the front of the dock. Plug the Charging Adapter
into a wall outlet. The dock must be plugged in continually for the robot to find it. The dock indicator will
turn green when the dock is plugged in. The robot will beep when it starts charging on the dock.

If the robot has no charge and cannot return to the
charging dock, place it on the dock manually. If the
batter y was depleted, it may take up to 60 seconds
for the robot lights to come on after manually
placing on the dock.

NOTE: Whe n manu ally placing the robot o n the dock, make sure the Charging Contacts on the bottom of the robot are
aligned with the dock . To ensure the robot is d ocked co rrectly, refer to th e Charge Indicator Lights section.

sharkclean.comsharkclean.com