Shark HZ250 User Manual
UltraLight Pet Corded Stick
with Self-Cleaning Brushroll
HZ250 Series
OWNER’S GUIDE
IMPORTANT SAFETY INSTRUCTIONS
HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
To reduce the risk of electric shock, this vacuum cleaner has a polarized
plug (one blade is wider than the other). As a safety feature, this plug will
fit into a polarized outlet only one way. If the plug does not fit fully into the
outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
DO NOT force into outlet or try to modify to fit.
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:
GENERAL WARNINGS
When using an electrical appliance,
basic precautions should always be
followed, including the following:
1. Your vacuum cleaner may consist
of a motorized nozzle, wand, hose,
and/or vacuum pod. This device
contains electrical connections,
electrical wiring, and moving
parts that potentially present risk
to the user.
2. Use only identical replacement parts.
3. Carefully observe and follow
the instructions provided below
to avoid improper use of the
appliance. DO NOT use the vacuum
for any purpose other than those
described in this manual.
4. Before use, carefully inspect all
parts for any damage. DO NOT
use if any parts are damaged.
5. The use of an extension cord is
NOT recommended.
6. This vacuum cleaner contains
no serviceable parts.
USE WARNINGS
7. This appliance can be used by
persons with reduced physical,
sensory or mental capabilities or
lack of experience and knowledge
if they have been given supervision
or instruction concerning use of
the appliance in a safe way and
understand the hazards involved.
Cleaning and user maintenance shall
not be made by children. Keep the
appliance and its cord out of reach of
children. DO NOT allow the appliance
to be used by children. DO NOT allow
to be used as a toy. Close supervision
is necessary when used near children.
8. Always turn off the vacuum cleaner
before connecting or disconnecting
any motorized nozzles or other
accessories.
9. DO NOT handle plug or vacuum
cleaner with wet hands.
10. DO NOT use without filters in place.
11. Only use Shark® branded filters
and accessories.
12. DO NOT damage the power cord:
a) DO NOT pull or carry vacuum
cleaner by the cord or use the
cord as a handle.
b) DO NOT unplug by pulling
on cord. Grasp the plug, not
the cord.
c) DO NOT run the vacuum cleaner
over the power cord, close a
door on the cord, pull the cord
around sharp corners, or leave
the cord near heated surfaces.
13. DO NOT put any objects into nozzle
or accessory openings. DO NOT use
with any opening blocked; keep free
of dust, lint, hair, and anything that
may reduce airflow.
14. DO NOT use if nozzle or accessory
airflow is restricted. If the air
paths or the motorized floor
nozzle become blocked, turn the
vacuum cleaner off and unplug
from electrical outlet. Remove all
obstructions before you plug in
and turn on the unit again.
15. Keep nozzle and all vacuum
openings away from hair, face,
fingers, uncovered feet, or
loose clothing.
16. DO NOT use if vacuum cleaner is
not working as it should, or has
been dropped, damaged, left
outdoors, or dropped into water.
17. Use extra care when cleaning
on stairs.
18. DO NOT leave the vacuum cleaner
unattended while plugged in.
19. When powered on, keep the
vacuum cleaner moving over the
carpet surface at all times to avoid
damaging the carpet fibers.
20. DO NOT place vacuum cleaner
on unstable surfaces such as chairs
or tables.
21. Your Shark® vacuum may not
be designed to stand up on its own.
When taking a break from cleaning,
you may need to lean it against
furniture or a wall, or lay it flat
on the floor. Using the vacuum
for an application where the unit
lacks stability may result in
personal injury.
22. DO NOT use to pick up:
a) Liquids
b) Large objects
c) Hard or sharp objects
(glass, nails, screws, or coins)
d) Large quantities of dust (drywall
dust, fireplace ash, or embers).
DO NOT use as an attachment to
power tools for dust collection.
e) Smoking or burning objects
(hot coals, cigarette butts,
or m atche s)
f) Flammable or combustible
materials (lighter fluid, gasoline,
or kerosene)
g) Toxic materials (chlorine bleach,
ammonia, or drain cleaner)
23. DO NOT use in the following areas:
a) Poorly lit areas
b) Wet or damp surfaces
c) Outdoor areas
d) Spaces that are enclosed and
may contain explosive or toxic
fumes or vapors (lighter fluid,
gasoline, kerosene, paint,
paint thinners, mothproofing
substances, or flammable dust)
24. Turn off all controls before plugging
in or unplugging the vacuum.
25. Unplug from electrical outlet
when not in use and before
any maintenance or cleaning.
26. Hand wash with water only.
Washing with cleaning chemicals
could damage the unit.
27. During cleaning or routine
maintenance, DO NOT cut anything
other than hair, fibers, or string
wrapped around the brushroll.
28. Allow all filters to air-dry completely
before replacing in the vacuum to
prevent liquid from being drawn
into electric parts.
29. Make sure the dust cup and all
filters are in place after routine
maintenance.
30. If provided, secure the power
cord around the two cord hooks
during storage.
sharkclean.comsharkclean.com
ASSEMBLY SETTINGS
1 2
(Click)
(Click)
1. Insert Wand into Floor Nozzle.
3
2. Insert Handheld Vacuum into wand.
3. Snap the Accessory Holder onto the wand,
then place accessories in the holder.
Ensure all connections click securely into place.
CONTROLS
The control panel is located on top of the
handheld vacuum.
POWER BUTTON
Power Button
Press the Power button to begin vacuuming.
Press again to turn o power.
BARE FLOOR SETTING CARPET SETTING
Bare Floor/Small Area Rugs
In the Bare Floor/Small Area Rug setting,
the brushrolls spin slowly to clean bare
floors and small arearugs.
Carpet
The brushrolls spin faster to pick up debris
below the surface ofyour carpets.
NOTE: Use the fl oor selector to toggle between Bare Floor and C arpet settin gs.
NOTE: For dee p cleaning per ASTM F 6 08 (embedded di rt in ca rpets) please use the Carpet set ting.
sharkclean.comsharkclean.com
Loading...