
HV390UK_QSG_1712 15
For questions or to register your product, contact us on
0800 862 0453 or visit us online at sharkclean.eu
Please make sure to read the enclosed Shark® O wner’s Gui de prior to using you r unit.
©2017 Eruo -Pro Europe Ltd. S HARK is a registe red trademark o f Eruo-Pro Europ e Ltd.
DUOCLEAN and FLEXOLOGY, and SHARKFLEX are trademarks of Eu ro-Pro Europe Ltd .
STORE ANYWHEREREACH ANYWHERE
FLEXOLOGY
Flexology
Lock Release
Flexology
Lock Release
Carry
Handle
HV390UK Series
CORDED VACUUM WITH FLEXOLOGY™
Use this Quick Start Guide
to start using your new
vacuum’s great features.
QUICK
STAR T
GUIDE
To store, wrap the cord anti-clockwise
around the hooks whilst in upright mo de.
Then press the Flexology Lo ck Release
and gently fold forwards.
To use the vacuum in upright mode
again, unwind the co rd then press the
Lock Release while lif ting the handheld
vacuum until the wand locks into place
Easily access hard-to-reach areas und er
furniture. Press th e Flexology Lock
Release button to lower the angle of the
wand to increase your reach.
Cool Gray 8c K
HV390UK_QSG_171215
UV VARNISH COATING OVER ALL

NOTE: For best performance,
use Setting I for all above-floor
accessories.
To detach the wand from the handheld
vacuum, press the Wand Release button
on the top of the wand.
To disconnect the wand from the floor
nozzle, stand the vacuum upright, step
on the foot pedal, and pull the wand up.
Floor Nozzle Release
Wand Release
OR
ABOVE-FLOOR CLEANING
VERSATILE FLOOR-TO-CEILING CLEANING
A
Handheld Vacuum
B
Motorised Floor Nozzle
C
Flexology Wand
D
Crevice Tool
E
Dusting Brush
F
Motorised pet Tool
A
B
C
AS S E M B LY
2
(Click)
1
(Click)
E F
WHAT’S INSIDE:
D
For additional par ts and accesso ries,
visit sharkclean.eu
The top flap of your b ox shows the selec t
accessories t hat are includ ed with your mode l.
For complete ins tructions , see enclosed
Owner's Guide.
Setting II
Deep cleans
carpets by removing
embedded dirt.
Setting I
Gentle on hard
floors and delicate
area rugs.
FLOOR CLEANING
Plug in the Vacuum
Place your foot gently on the floor
nozzle and tilt the handle back.
Choose Setting
Slide the power switch to appropriate
speed setting (I or I I) and start cl eaning.
Attach desired cleaning accessor y
to wand or handheld vacuum.
E
Cool Gray 8c K
HV390UK_QSG_171215
UV VARNISH COATING OVER ALL