THANK YOU
for purchasing the Shark® Rocket®
CONTENTS
ENGLISH
TIP: The model
number and serial
number are on
the QR code label,
located on the
bottom of the
dust cup.
TIP: The date code
is located on one of
the prongs of the
power cordplug.
REGISTER YOUR PURCHASE
registeryourshark.com
1-800-798-7398
Scan QR code using mobile device
RECORD THIS INFORMATION
Model Number: _____________________________
Date Code: _________________________________
Date of Purchase: ____________________________
(Keep receipt)
Store of Purchase: ___________________________
TECHNICAL SPECIFICATIONS
Voltage: 120V, 60Hz
Watts: 500W
Amps: 4.2A
Important Safety Instructions � � � � � � � � � � � � � � � � � � � � � � � � � � � 3
Getting To Know Your Shark® Rocket® � � � � � � � � � � � � � � � � � � � � 5
Assembling Your Vacuum � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7
Choosing the Appropriate Setting � � � � � � � � � � � � � � � � � � � � � � � 8
Using Your Vacuum in Above-Floor Mode � � � � � � � � � � � � � � � � 9
Storage � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10
Accessories � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 11
Maintaining Your Vacuum � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 13
Emptying the Dust Cup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Cleaning the Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Checking for Blockages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Bottom of Floor Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Troubleshooting Guide � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 17
Warranty � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 18
PLEASE READ CAREFULLY AND KEEP
FOR FUTURE REFERENCE�
This Owner’s Guide is designed to help you
get a complete understanding of your new
Shark Rocket ultra-light vacuum.
If you should have a question, please call the
Customer Service line at 1-800-798-7398.
1 2sharkclean.com sharkclean.com
IMPORTANT SAFETY INSTRUCTIONS
HOUSEHOLD USE ONLY
To reduce the risk of electric shock, this vacuum cleaner has a polarized
plug (one blade is wider than the other)� As a safety feature, this plug will
fit into a polarized outlet only one way� If the plug does not fit fully into the
outlet, reverse the plug� If it still does not fit, contact a qualified electrician�
DO NOT force into outlet or try to modify to fit�
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:
GENERAL WARNINGS
1. Your vacuum cleaner may consist
of a motorized nozzle, wand, hose,
and/or vacuum pod. This device
contains electrical connections,
electrical wiring, and moving
parts that potentially present risk
to the user.
2. Use only identical replacement
parts.
3. Carefully observe and follow the
instructions provided below to
avoid improper use of the appliance.
DO NOT use the vacuum for any
purpose other than those described
in this manual.
4. Before use, carefully inspect all
parts for any damage. DO NOT
use if any parts are damaged.
5. The use of an extension cord is
NOT recommended.
6. This vacuum cleaner contains
no serviceable parts.
USE WARNINGS
7. DO NOT allow the appliance to be
used by children. Close supervision
is necessary when used near
children. This is not a toy.
8. Always turn off the vacuum cleaner
before connecting or disconnecting
any motorized nozzles or other
accessories.
9. DO NOT handle plug or vacuum
cleaner with wet hands.
10. DO NOT use without filters in place.
11. Only use Shark® branded filters
and accessories. Failure to do so
will also void the warranty.
12. DO NOT damage the power cord:
a) DO NOT pull or carry vacuum
cleaner by the cord or use the
cord as a handle.
b) DO NOT unplug by pulling
on cord. Grasp the plug, not
the cord.
c) DO NOT run the vacuum cleaner
over the power cord, close a
door on the cord, pull the cord
around sharp corners, or leave
the cord near heated surfaces.
13. DO NOT put any objects into nozzle
or accessory openings. DO NOT use
with any opening blocked; keep free
of dust, lint, hair, and anything that
may reduce airflow.
14. DO NOT use if nozzle or accessory
airflow is restricted. If the air
paths or the motorized floor
nozzle become blocked, turn the
vacuum cleaner off and unplug
from electrical outlet. Remove all
obstructions before you plug in
and turn on the unit again.
15. Keep nozzle and all vacuum
openings away from hair, face,
fingers, uncovered feet, or
loose clothing.
16. DO NOT use if vacuum cleaner is
not working as it should, or has been
dropped, damaged, left outdoors, or
dropped into water.
SAVE THESE INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
17. Use extra care when cleaning
on stairs.
18. DO NOT leave the vacuum cleaner
unattended while plugged in.
19. When powered on, keep the
vacuum cleaner moving over the
carpet surface at all times to avoid
damaging the carpet fibers.
20. DO NOT place vacuum cleaner
on unstable surfaces such as chairs
or tables.
21. Your Shark® vacuum may not
be designed to stand up on its own.
When taking a break from cleaning,
you may need to lean it against
furniture or a wall, or lay it flat
on the floor. Using the vacuum
for an application where the unit
lacks stability may result in
personal injury.
22. DO NOT use to pick up:
a) Liquids
b) Large objects
c) Hard or sharp objects
(glass, nails, screws, or coins)
d) Large quantities of dust (drywall
dust, fireplace ash, or embers).
DO NOT use as an attachment to
power tools for dust collection.
e) Smoking or burning objects
(hot coals, cigarette butts,
or matches)
f) Flammable or combustible
materials (lighter fluid, gasoline,
or kerosene)
g) Toxic materials (chlorine bleach,
ammonia, or drain cleaner)
23. DO NOT use in the following areas:
a) Poorly lit areas
b) Wet or damp surfaces
c) Outdoor areas
d) Spaces that are enclosed
and may contain explosive or
toxic fumes or vapors (lighter
fluid, gasoline, kerosene, paint,
paint thinners, mothproofing
substances, or flammable dust)
24. Turn off all controls before plugging
in or unplugging the vacuum.
25. Unplug from electrical outlet
when not in use and before
any maintenance or cleaning.
26. Hand wash with water only.
Washing with cleaning chemicals
could damage the unit.
27. During cleaning or routine
maintenance, DO NOT cut anything
other than hair, fibers, or string
wrapped around the brushroll.
28. Allow all filters to air-dry completely
before replacing in the vacuum to
prevent liquid from being drawn
into electric parts.
29. Make sure the dust cup and all
filters are in place after routine
maintenance.
30. If provided, secure the power
cord around the two cord hooks
during storage.
ENGLISH
4sharkclean.com3 sharkclean.com