SHANGHAI SUNRISE ELECTRONICS CO P6KE10, P6KE100C, P6KE100, P6KE10C, P6KE10CA Datasheet

SHANGHAI SUNRISE ELECTRONICS CO

P6KE6.8 THRU P6KE440CA

TRANSIENT VOLTAGE SUPPRESSOR

BREAKDOWN VOLTAGE:6.8-440V

PEAK PULSE POWER: 600W

TECHNICAL SPECIFICATIO

FEATURES

•600W peak pulse power capability

•Excellent clamping capability

•Low incremental surge resistance

•Fast response time:

typically less than 1.0ps from 0V to VBR

for unidirectional and 5.0nS for bidirectional types.

•High temperature soldering guaranteed: 265oC/10S/9.5mm lead length at 5 lbs tension

MECHANICAL DATA

•Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C

•Case: Molded with UL-94 Class V-O recognized flame retardant epoxy

•Polarity: Color band denotes cathode except for unidirectional types.

•Mounting position: Any

DO-15

Dimensions in inches and (millimeters)

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

(Ratings at 25oC ambient temperature unless otherwise specified)

	RATINGS		SYMBOL	VALUE
	Peak power dissipation	(Note 1)	Pppm	Minimum 600
	Peak pulse reverse current	(Note 1)	Ippm	See Table
	Steady state power dissipation	(Note 2)	Pm(av)	2.0
	Peak forward surge current	(Note 3)	IFSM	100
	Maximum instantaneous forward voltage at 50A		VF	3.5/5.0
	for unidirectional only	(Note 4)
	Operating junction and storage temperature range		TSTG,TJ	-55 to + 175

Notes:

1.10/1000 S waveform non-repetitive current pulse, and derated above Ta=25oC

2.Tl=75oC, lead length 9.5mm, Mounted on copper pad area of (20×20mm)

3.Measured on 8.3ms single half sine-wave or equivalent square wave,duty cycle=4 pulses per min

4. VF=3.5V max. for devices of V(BR) 200V, and VF=5.0V max. for devices of V(BR) >200V

DEVICES FOR BIDIRECTIONAL APPLICATIONS

1.Suffix 'A' dnotes 5% tolerance device,no suffix 'A' dnotes 10% tolerance device.

2.For bidirectional use 'C' or 'CA' suffix for types P6KE6.8 thru types P6KE440A (e.g. P6KE7.5C, P6KE440CA), for unidirectional don't use 'C' suffix after types.

3.For bidirectional devices having VWM of 10 volts and less, the ID limit is doubled.

4.Electrical characteristics apply in both directions.

http://www.sse

., LTD.

TECHNICAL

SPECIFICATION

DO-15

Dimensions in inches and (millimeters)

UNITS

W

A

W

A

V

oC

ute maximum.

-diode.com