April 1998 1/3
This is preliminary information on a new product in development or undergoing evaluation. Details are subject to change without noti ce.
R
ST7275-1
8-BIT, 56-PIN MCU FOR MONITORS, WITH UP TO 60K ROM, 2K
RAM, ADC, TIMER, IR, SYNC, PWM/BRM, DDC/DMA, I
2
C & SCI
PRODUCT PREVIEW
■
User ROM/OTP/EPROM: up to 60 Kbytes
■
Data RAM: up to 2 Kbytes (256 bytes stack)
■
8 MHz Maximum Internal Clock Frequency in
fast mode, 4 MHz in normal mode
■
Run, Wait and Halt CPU modes
■
Sync Processor for Mode Recognition, power
management and composite video blanking,
clamping and free-running frequency
generation.
– Corrector mode
– Analyzer mode
■
Fast I2C Multi Master Interface
■
DDC Bus Interface fully compliant with DDC1,
2B, 2B+, 2AB, 2Bi standards
■
32 I/O lines
– 8 Open Drain I/Os with high current capacity
(10 mA) on port A
– 5 lines programmable as interrupt inputs
■
16-bit timer with 2 in put captures an d 2 output
compare functions (with 1 output pin)
■
8-bit Analog to Digital Converter with 8
channels on port B
■
8 10-bit PWM/BRM Digital to Analog outputs
■
One 12-bit PWM/BRM Digital to Analog output
■
Asynchronous Serial Communications
Interface
■
Infra red controller
■
Master Reset and Power on/off reset1
■
Programmable Watchdog for system reliability
■
56-pin Shrink Dual In line Plastic package
■
Fully static operation
■
0 to + 70 oC operating temperature range
■
4.0V to 5.5V supply operating range
■
24 MHz Quartz Oscillator
■
63 basic instructions/17 main address modes
■
8x8 unsigned multiply instruction
■
True bit manipulation
■
Versatile Development Tools (DOS and
Windows) including assembler, linker, Ccompiler, archiver, source level debugger,
EPROM programme r and hardware emula tor
Device Summary
Note 1
: Power On/Off reset not implemented in
this revision.
Features ST72751N9 ST72751N7 ST72751N6
ROM
(bytes)
60K 48K 32K
RAM
(bytes)
2K 1.5 1
ADC 8 channels
Timer 1
I
2
C Bus one multimaster
DDC/DMA yes
Sync yes
PWM 9
I/O 32
SCI yes
IR yes
EPROM
Device
ST72E751N9D1
OTP
Device
ST72T751N9B1
PSDIP56
See Ordering Information at the end of the Document
1