SGS TJH1.5 Owner's Manual

FOR YOUR SAFETY
PLEASE READ THESE INSTRUCTIONS CAREFULLY
AND RETAIN THEM FOR FUTURE USE.

OWNER’S MANUAL

TJH1.5 LONG REACH
TROLLEY JACK

PAGE 2

SPECIFICATION

Part Number: TJH1.5

Product Weight: 50kg

Brand: SGS Engineering

Capacity: 1.5 Ton

A - Closed Height: 135mm

D - Fully Extended: 855mm

E - Base Width: 450mm

F - Base Length: 1050mm

H - Height 180mm

Saddle Diameter: 105mm

WWW.SGS-ENGINEERING.COM

PAGE 3

SAFETY

1. Always read and ensure you fully understand the following precau­tions and the hazards associated with this product.

2. Only use this jack for its manufactured purpose.

3. Never make any modifications to this product. If experiencing dif­ficulty of any kind contact us.

4. Never use the jack on uneven surfaces, only on flat ground.

5. Never start the vehicle engine whilst the trolley jack is in use.

6. This jack is for lifting only. Never move a vehicle using the trolley
jack as a dolly.

7. Ensure the load is taken by the full saddle and that the point of lift
on the vehicle is strong enough to support the full weight ad­equately.

8. Never allow children or bystanders in the area while the jack is in
use. Ensure that all personnel are well clear of a load being raised
or lowered.

9. Never work underneath a vehicle supported only by this jack. If
working under a vehicle, always use stands designed for the pur­pose.

10. Ensure the jack is on a firm solid base and that there is no likeli­hood of it slipping when under load.

PAGE 4

Before use, visually examine the trolley jack for oil leaks or any
other sign of damage.

Should any appear, have the jack inspected and repaired by con­tacting us at SGS Engineering.

Ensure the vehicle to be raised is chocked and standing on firm,
level ground before manoeuvring the trolley jack so that the saddle
is directly underneath the lifting point.

Consult the vehicle manual to find out the suitable lifting points.

ASSEMBLY AND BEFORE FIRST USE CHECKS

Ensure you have the following components before use:

1. TROLLEY JACK CHASSIS

2. PUMPING HANDLE IN TWO PARTS

WWW.SGS-ENGINEERING.COM