SGS SSB400 Owner's Manual

SSB400
SANDBLASTING CABINET

OWNER’S MANUAL

FOR YOUR SAFETY
PLEASE READ THESE INSTRUCTIONS CAREFULLY
AND RETAIN THEM FOR FUTURE USE.

SPECIFICATION

WARNING

MODEL No SSB400

MAX WORK PRESSURE 125 PSI / 8.6 BAR

WEIGHT 160kg

LENGTH
WIDTH
HEIGHT

MOTOR 120V, 60Hz, 1100W

AIR CONSUMPTION 680L/min

AIR REQUIREMENT 24 CFM @ 125PSI

WARNING

1240mm
1330mm
1770mm

Read and understand instructions before use.

Do not use any silica based abrasives with this cabinet.
Silica based abrasives have been linked to severe res­piratory disease. Always use recommended abrasives.
Abrasives used in this unit may be covered by COSHH.

• All hoses sould be rated at least 125 PSI.

• Supplied air should be dry and clean from oil and other contaminants.

• Before operating the cabinet check seals on the doors, and make sure
dust collection system is running.

• This tank is NOT suitable for paint thinners, gun wash, or air drying.

• DO NOT operate the cleaning tank when you are tired, under the
influence of alcohol, drugs, or intoxication.

Always wear eye/face and hand protection.

WWW.SGS-ENGINEERING.COM

PAGE 2

• When not in use switch the cleaning tank off and remove plug from
power supply.

• DO NOT operate the cleaning tank if any parts are missing or
damaged. Use original parts and do not sybstitute or modify original
supplied items.

PAGE 3