SGS CRSSA User Manual
TEST REPORT:
REPORTED DATE: 27-January-2021
No. CRSSA/210155117-CA55654
Job Ref. CRS/2021-01-18-010
NO. 2 PERSIARAN BUDIMAN, SEKSYEN 23,
40300 SHAH ALAM, SELANGOR DARUL EHSAN,
MALAYSIA.
SHOWA DENKO MATERIALS (SELANGOR) SDN BHD
The following sample(s) was/were submitted and identified by applicant as:
Epoxy Molding Compound
SAMPLE DESCRIPTION :
GE-7470 series
SAMPLE RECEIVED
TESTING PERIOD
TEST METHOD
18-January-2021
18-January-2021 to 21-January-2021
:
:
:
:
TEST REQUESTED
:
TEST RESULTS
-PLEASE REFER TO NEXT PAGE(S)-
-PLEASE REFER TO NEXT PAGE(S)-
Selected test(s) as requested by customer
SIGNED FOR AND ON BEHALF OF
SGS (MALAYSIA) SDN BHD
.........................................
TAY SIAM PINE
TECHNICAL MANAGER
IKM No. M/3452/6047/11/12
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at https://www.sgs.com/en/terms-and-conditions and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at https://www.sgs.com/en/terms-and-conditions/terms-e-document. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from
exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized
alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results
shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 7 days (for perishable samples) or 30 days only from date of report.
Test Report Form No.: SGS/TR/CRS/013, Ver: 11.0, Effective Date: 18/01/2021
SGS (Malaysia) Sdn.Bhd.
(Company No. 10871-T)
Lot 4, Persiaran Jubli Perak, Seksyen 22, 40300 Shah Alam, Selangor Darul Ehsan, Malaysia.
t +6(03) 7627 0080 f +6 (03) 7627 0082 www.sgs.com
Member of the SGS Group (SGS SA)
Page 1 of 5
TEST REPORT:
REPORTED DATE: 27-January-2021
No. CRSSA/210155117-CA55654
Job Ref. CRS/2021-01-18-010
TEST RESULTS BY CHEMICAL METHOD:
Test Part Description
Sample Description:
Test Parameter(s):
Unit
Test Method
MDL
Result
-PLEASE REFER TO PAGE 1-
Hexabromocyclododecane
(HBCDD)(CAS No.:
3194-55-6,25637-99-4
In-house method, SGS-TM-RSTS-O-012, with
reference to IEC 62321-6:2015. Analysis was
performed by GCMS
mg/kg 5N.D.
N.D.
Phthalates
-
-
-
-
Di-isodecyl phthalate (DIDP)
(CAS No.: 26761-40-0,
68515-49-1)
With reference to IEC 62321-8:2017,
determination of phthalates by GC-MS.
mg/kg 100N.D.
N.D.
Di-isononyl phthalate (DINP)
(CAS No.: 28553-12-0,
68515-48-0)
With reference to IEC 62321-8:2017,
determination of phthalates by GC-MS.
mg/kg 100N.D.
N.D.
Di-n-octyl phthalate (DNOP)
(CAS No. 117-84-0)
With reference to IEC 62321-8:2017,
determination of phthalates by GC-MS.
mg/kg 50N.D.
N.D.
Di-n-hexyl phthalate
(DnHP/DHEXP)
(CAS No. 84-75-3)
In-house SGS-TM-RSTS-O-003 with reference to
IEC 62321-8:2017. Analysis was performed by
GC-MS.
mg/kg 50N.D.
N.D.
Diisoheptyl phthalate (DIHP)
(CAS No.:71888-89-6)
In-house SGS-TM-RSTS-O-003 with reference to
IEC 62321-8:2017. Analysis was performed by
GC-MS.
mg/kg 100N.D.
N.D.
1,2-Benzenedicarboxylic
acid, di-C7-11-branched and
linear alkyl esters (DHNUP)
(CAS No.:68515-42-4)
In-house SGS-TM-RSTS-O-003 with reference to
IEC 62321-8:2017. Analysis was performed by
GC-MS.
mg/kg 100N.D.
N.D.
Bis (2-methoxyethyl)
phthalate (DMEP)
(CAS No.:117-82-8)
In-house SGS-TM-RSTS-O-003 with reference to
IEC 62321-8:2017. Analysis was performed by
GC-MS.
mg/kg 50N.D.
N.D.
SIGNED FOR AND ON BEHALF OF
SGS (MALAYSIA) SDN BHD
.........................................
TAY SIAM PINE
TECHNICAL MANAGER
IKM No. M/3452/6047/11/12
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at https://www.sgs.com/en/terms-and-conditions and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at https://www.sgs.com/en/terms-and-conditions/terms-e-document. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from
exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized
alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results
shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 7 days (for perishable samples) or 30 days only from date of report.
Test Report Form No.: SGS/TR/CRS/013, Ver: 11.0, Effective Date: 18/01/2021
SGS (Malaysia) Sdn.Bhd.
(Company No. 10871-T)
Lot 4, Persiaran Jubli Perak, Seksyen 22, 40300 Shah Alam, Selangor Darul Ehsan, Malaysia.
t +6(03) 7627 0080 f +6 (03) 7627 0082 www.sgs.com
Member of the SGS Group (SGS SA)
Page 2 of 5
Loading...