Severin BA 3233 User Manual

9

8

10
12

11

7
4
6

5

3

13

14

1

2

Dear Customer,

Before using the appliance, the user should
read the following instructions carefully.

Connection to the mains supply

The appliance should only be connected to
an earthed socket installed in accordance
with the regulations.

Dual-voltage selector:

With the dual voltage selector, the iron can
be set to different supply voltages by using a
screwdriver or similar tool. Make sure that
the set voltage corresponds with the supply
voltage.
This product complies with all binding CE
labelling directives.

Familiarisation

1. Rating label

2. Dual voltage selector

3. Temperature control knob, infinitely
adjustable

4. Steam switch

5. Spray button

6. Spray nozzle

7. Water fill hole

8. Water level indication

9. Soleplate

10. Indicator light

11. Stand (base and handle)

12. Power cord with plug

13. Foldable handle

14. Handle release

Important safety instructions

● Do not use the iron if it has been

dropped onto a hard surface, or shows
any other sign of damage, or is seen to
leak water.

● The steam travel iron is not suitable for

regular domestic use.

● Great care is necessary when using any

appliance, especially near chil-dren. Do
not leave the steam iron unattended

while connected or on an ironing board.
Always remove the plug from the wall
socket and place the steam iron on its
base stand.

● The appliance operates at very high

temperatures. Do not touch any part of
the appliance except the handle. Burns
can occur from touching the hot parts of
the housing or the soleplate and from hot
water or steam. When operating the
steam iron, hold only by the handle. Do
not allow steam to escape in the direction
of anyone nearby.

● The iron must be used and stored on a

stable and durable surface only.

● With the iron placed on its base stand,

ensure that this too is on a stable and
durable surface.

● Do not allow the power cord to touch

hot surfaces. Do not coil the power cord
round the appliance.

● Always switch off and remove the plug

from the wall socket after use, and also

- in case of any malfunction,

- during cleaning.

● Before the appliance is used, the main

body including the power cord as well as
any attachment fitted should be checked
thoroughly for any defects. Should the
appliance, for instance, have been
dropped onto a hard surface, it must no
longer be used: even invisible damage
may have adverse effects on the
operational safety of the appliance.

● The power cord should be regularly

examined for any signs of damage. In the
event of such damage being found, the
appliance must no longer be used.

● Do not operate the appliance if excessive

force has been used to pull the power
cord. Damage cannot always be detected
from the outside; the entire unit should
therefore be checked by a qualified
technician before it is used again.

● Before refilling or emptying the water

reservoir, remove the plug from the wall
socket.

● When removing the plug from the wall

5

Travel iron

