Page 1
2017
Protocol Implementation Conformance Statement of FLEX
Protocol
Implementation
SETRA
Conformance
Statement
Setra FLEX Environmental Monitor
This document gives the brief product description and the complete over view of
the PICS statement.
SS-FLEX-BAC-PICS Rev. B
Page 2
Index
1. Document Introduction ................................................................................................................ 3
2. Product Description as per Annex A PICS (normative) ............................................................. 3
3. BACnet Requirements ................................................................................................................. 3
3.1 BACnet Standardized Device Profile (Annex L) ................................................................... 3
3.2 BACnet Interoperability Building Blocks (BIBBs) (Annex K) ............................................... 4
3.3 Standard Object Types Supported ......................................................................................... 5
3.3.1 Analog Input ........................................................................................................................ 5
3.3.2 Analog Output ..................................................................................................................... 5
3.3.3 Analog Value ....................................................................................................................... 6
3.3.4 Binary Input ......................................................................................................................... 7
3.3.5 Binary Output ...................................................................................................................... 7
3.3.6 Binary Value ........................................................................................................................ 8
3.3.7 Device .................................................................................................................................. 9
3.3.8 Multi-State Input ............................................................................................................... 10
3.3.9 Multi-State Value .............................................................................................................. 10
3.3.10 Loop .................................................................................................................................... 11
3.3.11 Character String Value Object ....................................................................................... 12
3.4 Data Link Layer Option ........................................................................................................... 12
3.5 Segmentation Capability ........................................................................................................ 12
3.6 Device Address Binding ......................................................................................................... 12
3.7 Networking Options ................................................................................................................. 12
3.8 Character Sets Supported ...................................................................................................... 13
3.9 Supported Services ................................................................................................................. 13
Page 2 of 13
SS-FLEX-BAC-PICS REV. B 10/17/2017
Page 3
1. Document Introduction
This document contains the Protocol Implementation Conformance Statement (PICS) and BACnet®
Interoperability Building Blocks (BIBBs) for the Setra FLEX™ as required by the American National Standards
Institute/ American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ANSI/ASHRAE) Standard
135-2012, BACnet protocol. BACnet interoperability building blocks are collections of one or more BACnet
services. This document includes a listing of the BIBBs currently supported by the Monitor.
FLEX is a native BACnet Application Specific Controller with MS/TP and IP capabilities.
2. Product Description as per Annex A PICS (normative)
Setra FLEX in conjunction with a separate Expansion I/O module (not BACnet) provide a complete solution for
monitoring and controlling critical room parameters like pressure, temperature, and humidity in healthcare and
laboratory facilities.
3. BACnet Requirements
3.1 BACnet Standardized Device Profile (Annex L)
BACnet Operator Workstation (B-OWS)
BACnet Building Controller (B-BC)
BACnet Advanced Application Controller (B-AAC)
BACnet Application Specific Controller (B-ASC)
BACnet Smart Sensor (B-SS)
BACnet Smart Actuator (B-SA)
Page 3 of 13
SS-FLEX-BAC-PICS REV. B 10/17/2017
Page 4
3.2 BACnet Interoperability Building Blocks (BIBBs) (Annex K)
Table below lists all the BIBBs that are required for the BACnet Application Specific Controller (B-ASC)
profile for FLEX. The BIBBS that are not required for B-ASC Profile but supported in FLEX are also listed.
Application Specific Controller (B-ASC) Designation
Required for B-ASC Profile
Data Sharing - Read Property – B
Data Sharing - Write Property – B
Device Management - Dynamic Device Binding – B
Device Management - Dynamic Object Binding – B
Device Management - Device Communication Control – B
Not Required for B-ASC Profile but supported in FLEX
Data Sharing - Write Property Multiple – B
Data Sharing - Read Property Multiple – B
Device Management - Reinitialize Device – B
Device Management - Time Synchronization – B
Device Management-Dynamic Device Binding-A
Device Management – UTC Time Synchronization – B
Data Sharing - Read Property – A
Data Sharing - Write Property – A
Data Sharing-COV-B
DS-RP-B
DS-WP-B
DM-DDB-B
DM-DOB-B
DM-DCC-B
DS-WPM-B
DS-RPM-B
DM-RD-B
DM-TS-B
DM-DDB-A
DM-UTC-B
DS-RP-A
DS-WP-A
DS-COV-B
Page 4 of 13
SS-FLEX-BAC-PICS REV. B 10/17/2017
Page 5
3.3 Standard Object Types Supported
3.3.1 Analog Input
Dynamically Creatable: YES NO
Dynamically Deletable: YES NO
Property Identifier
Writable
Object_Identifier No
Object_Name Yes
Object_Type No
Present_Value Yes*
Description Yes
Device_Type No
Status_Flags No
Event_State No
Out_Of_Service Yes
Units No+
Min_Pres_Value No+
Max_Pres_Value No+
Resolution No+
COV_Increment Yes
*writable only when Out_Of_Service is true
+
writable for instances 13-30
Conformance Code
Required Optional
restrictions
Range
3.3.2 Analog Output
Dynamically Creatable: YES NO
Dynamically Deletable: YES NO
Property Identifier
Object_Identifier No
Object_Name Yes
Object_Type No
Present_Value Yes
Description Yes
Status_Flags No
Event_State No
Out_Of_Service Yes
Units No
COV_Increment Yes
Max_Pres_Value Yes
Min_Pres_Value Yes
Resolution Yes
Priority_Array No
Relinquish_Default Yes
Writable
Conformance Code
Required Optional
Range
restrictions
Page 5 of 13
SS-FLEX-BAC-PICS REV. B 10/17/2017
Page 6
3.3.3 Analog Value
Dynamically Creatable: YES NO
Dynamically Deletable: YES NO
Property Identifier
Object_Identifier No
Object_Name Yes
Object_Type No
Present_Value Yes
Description Yes
Status_Flags No
Event_State No
Out_Of_Service Yes
Units No
COV_Increment Yes
Writable
Conformance Code
Required Optional
Range
restrictions
Page 6 of 13
SS-FLEX-BAC-PICS REV. B 10/17/2017
Page 7
3.3.4 Binary Input
Dynamically Creatable: YES NO
Dynamically Deletable: YES NO
Property Identifier
Object_Identifier No
Object_Name Yes
Object_Type No
Present_Value* Yes
Description Yes
Device_Type No
Status_Flags No
Event_State No
Out_Of_Service Yes
Polarity No
Inactive_Text Yes
Active_Text Yes
*writable only when Out_Of_Service is true
Writable
Conformance Code
Required Optional
Range
restrictions
3.3.5 Binary Output
Dynamically Creatable: YES NO
Dynamically Deletable: YES NO
Property Identifier
Object_Identifier No
Object_Name Yes
Object_Type No
Present_Value Yes
Description Yes
Device_Type No
Status_Flags No
Event_State No
Out_Of_Service Yes
Polarity No
Inactive_Text Yes
Active_Text Yes
Priority_Array No
Relinquish_Default Yes
Writable
Conformance Code
Required Optional
Range
restrictions
Page 7 of 13
SS-FLEX-BAC-PICS REV. B 10/17/2017
Page 8
3.3.6 Binary Value
Dynamically Creatable: YES NO
Dynamically Deletable: YES NO
Property Identifier
Object_Identifier No
Object_Name Yes
Object_Type No
Present_Value Yes
Description Yes
Status_Flags No
Event_State No
Out_Of_Service No
Inactive_Text Yes
Active_Text Yes
Writable
Conformance Code
Required Optional
Range
restrictions
Page 8 of 13
SS-FLEX-BAC-PICS REV. B 10/17/2017
Page 9
3.3.7 Device
Dynamically Creatable: YES NO
Dynamically Deletable: YES NO
Property Identifier
Writable
Conformance Code
Required Optional
Object_Identifier No
Object_Name Yes
Object_Type No
System_Status No
Vendor_Name No
Vendor_Identifier No
Model_Name No
Firmware_Revision No
Application_Software_Version No
Location Yes
Description Yes
Protocol_Version No
Protocol_Revision No
Protocol_Services_Supported No
Protocol_Object_Types_Supported No
Object_List No
Max_APDU_Length_Accepted No
Segmentation_Supported No
Local_Time No
Local_Date No
APDU_Timeout No
Number_Of_APDU_Retries No
Max_Master No
Max_Info_Frames No
Device_Address_Binding No
Database_Revision No
Daylight_Savings_Status
UTC_Offset
Active_COV_Subscriptions
MAX_SEGMENTS_ACCEPTED
Yes
Yes
Yes
NO
Range
restrictions
Page 9 of 13
SS-FLEX-BAC-PICS REV. B 10/17/2017
Page 10
3.3.8 Multi-State Input
Dynamically Creatable: YES NO
Dynamically Deletable: YES NO
Property Identifier
Object_Identifier
Object_Name
Object_Type
Present_Value*
Description
Status_Flags
Event_State
Out_Of_Service
Number_Of_States
State_Text
*writable only when Out_Of_Service is true
Writable
No
Yes
No
No
Yes
No
No
No
No
No
Conformance Code
Required Optional
Range
restrictions
3.3.9 Multi-State Value
Dynamically Creatable: YES NO
Dynamically Deletable: YES NO
Property Identifier
Object_Identifier
Object_Name
Object_Type
Present_Value
Description
Status_Flags
Event_State
Out_Of_Service
Number_Of_States
State_Text
.
Writable
No
Yes
No
Yes
Yes
No
No
No
No
No
Conformance Code
Required Optional
Range
restrictions
Page 10 of 13
SS-FLEX-BAC-PICS REV. B 10/17/2017
Page 11
3.3.10 Loop
Dynamically Creatable: YES NO
Dynamically Deletable: YES NO
Property Identifier
Object_Identifier
Object_Name
Object_Type
Present_Value*
Description
Status_Flags
Event_State
Out_Of_Service
Update interval
OUTPUT UNITS
Manipulated_Variable_Reference Yes
Writable
No
Yes
No
No
Yes
No
No
No
No
No
Conformance Code
Required Optional
Range
restrictions
Controlled_Variable_Reference Yes
Controlled_Variable_Value No
Controlled_Variable_Units No
Setpoint_Reference Yes
Setpoint No
Action Yes
Proportional_Constant Yes
Proportional_Constant_Units Yes
Integral_Constant Yes
Integral_Constant_Units Yes
Priority_For_Writing Yes
Page 11 of 13
SS-FLEX-BAC-PICS REV. B 10/17/2017
Page 12
3.3.11 Character String Value Object
Dynamically Creatable: YES NO
Dynamically Deletable: YES NO
Property Identifier
Object_Identifier No
Object_Name Yes
Description Yes
Object_Type No
Present_Value Yes
Status_Flags No
Writable
Conformance Code
Required Optional
Range
restrictions
3.4 Data Link Layer Option
BACnet Internet Protocol (IP) (Annex J)
BACnet IP (Annex J), Foreign Device
ISO 8802-3, Ethernet (Clause 7)
ANSI/ATA 878.1, 2.5 MB ARCNET network (Clause 8)
ANSI/ATA 878.1, RS-485 ARCNET network (Clause 8), baud rates:
Master-Slave/Token-Passing (MS/TP) master (Clause 9), baud rates: 9600, 19200, 38400, 76800
MS/TP slave (Clause 9), baud rates: 9600, 19200, 38400, 76800
Point-To-Point, EIA 232 (Clause 10), baud rates:
Point-To-Point, modem (Clause 10), baud rates:
LonTalk® protocol (Clause 11), medium:
Other:
3.5 Segmentation Capability
Segmented requests supported : Window Size: 1
Segmented responses supported : Window Size: 1
3.6 Device Address Binding
Is static device binding supported? (Required for two-way communication between MS/TP slaves
and other devices)
YES NO
3.7 Networking Options
Router, Clause 6
Annex H, BACnet Tunneling Router over IP
BACnet/IP Broadcast Management Device (BBMD)
Does the BBMD support registrations by Foreign Devices? YES NO
Page 12 of 13
SS-FLEX-BAC-PICS REV. B 10/17/2017
Page 13
3.8 Character Sets Supported
DeviceCommunicationControl
Service
ReinitializeDevice Service
Timesynchronization Service
Indicating support for multiple character sets does not imply that they can all be supported simultaneously.
ISO 10646 (UTF-8)
IBM/Microsoft DBCS)
ISO 8859-1
ISO 10646 (UCS-2)
ISO 10646 (UCS-4)
JIS X 0208
3.9 Supported Services
Table below lists all the BACnet standard application services. The checked services are supported.
Application Service
ReadProperty Service
ReadPropertyMultiple Service
WriteProperty Service
WritePropertyMultiple Service
UTCTimesynchronization Service
who-Is
Who-Has
I-Am
I-Have
UnconfirmedCOVNotification
ConfirmedCOVNotification
SubscribeCOV
Initiates Requests Executes Requests
Page 13 of 13
SS-FLEX-BAC-PICS REV. B 10/17/2017
Loading...