Setra SecureCal Specifications
SecureCal™ Calibration Key
AccuSense™ Accessory
SPECIFICATIONS
Display
Type LCD STN Gray Reective
Number of Characters 8 CH x 2 Lines
Character Size 1.845mm W x 2.595 mm H
Display Resolution
5 VDC 4 digits (±0.1 mV Correction)
ACCESSORY
AccuSense™ Model ASM with
SecureCal™ Accessory
DESCRIPTION
The SecureCal™ makes eld calibration of AccuSense™ pressure
transducers simple and secure. When connected to the tran
ducer, the simple push-button performs Snap Zero, Snap Span
and Factory Restore functions. The rotary dial provides ne analog output adjustments in the positive and negative direction
(0.1mV resolution), eliminating the need for manual zero and
span pot adjustments. The two-line LCD and LED conrmation
lights provide immediate feedback for quick, in-place adjustments. SecureCal™ can be congured for voltage or current
output AccuSense™ transducers.
DIMENSIONS
1.50
38.10
1.65
41.91
10 VDC 4 digits (±0.2mV Correction)
4 to 20 mA 6 digits (±0.00021mV Correction)
Environmental
Temperature
Operating ºF (ºC) +32 to +122 (0 to +50)
Storage ºF (ºC) -4 to +158 (-20 to +70)
Electrical Data
Nominal Excitation 24 VDC
Excitation Range 15 to 30 VDC
Interface with Sensor Serial Communications
1.60
40.69
2.64
67.08
in.
mm
ORDERING INFORMATION
S E C 1
Model Input
SEC1 SEC V Voltage (0-5VDC & 0-10VDC) TBR Removable Terminal Block, Rear 03R 3ft (1m) Cable 00 None, Standard
C Current (4-20mA) B3B Std 6-Pin Bayonet, Female, B3 Wiring
Phone: 800-257-3872 • Fax: 978-264-0292 • www.setra.com ©2013 Setra Systems, Inc. All rights reserved. The Setra Systems name and logo are registered trademarks of Setra Systems, Inc.
Connection to
AccuSense™ Transducer
B4B
6-Pin Bayonet, Female, Opt Wiring, B4, B5, B6
B5B
Wiring Code, Bottom
B6B
(See “Wiring Code” Table)
B7B
0 3 R
Connection to
Power Supply Options
Example Part No: SEC1VTBR03R00 =SecureCal Accessory,
voltage input, removable terminal block connection, 3ft cable,
no options
0 0
SSP-SecureCal RevA 5/2013
Loading...