Setra Power Battalion 48 Specifications

Power Battalion 48

Networked Power Meter

The Power Battalion 48 is a multi-circuit, revenue grade power meter designed to signicantly reduce installation time and cost per metering point. The Power Battalion 48 can be used with standard CTs, 1 Volt output or less, or with Rogowski style CTs to monitor any combination of up to 16 three-phase or 48 single-phase loads. The versatility of the device allows monitoring of two separate voltages and transformers on same meter simultaneously. The Setra power meter provides ANSI C12.20 accuracy on all circuits being metered.

Easy Installation and Conguration

The Power Battalion 48 is line powered with 90-600 volts, eliminating the need to choose a separate model number for single or three phase circuits and ensuring the correct part numbers are ordered. The Power Battalion 48 can be congured with a web browser or direct USB connection prior to installation, signicantly reducing labor costs, maximizing safety and eliminating the need for personal protective equipment. The initial set-up of the meter can be done from a lap top using the free Headstart software which also allows for cloning of the set-up parameters for multiple meters. The multi-colored backlit display ensure that the CTs are properly phased the rst time, eliminating the hassle and expense of having to return

to the job site.

CT Flexibility

The Power Battalion 48 provides the option to choose between standard split core CTs, existing current transformers or the Setra Patrol Flex CTs. Power Battalion 48’s interchangeable CT conguration on the browser drop down menu allows for exibility at the job site or when making last minute changes. Setra Patrol Flex CTs are industry best 0.5% revenue grade accuracy when used in conjunction with the Battalion.

YEAR

Phase-CheckVericationShownonDisplaytoConrm

ProperCTOrientation

FieldSelectableBACnet/Modbus(4-in-1)

Back-litPushButtonDisplay

Power Battalion Features:

• Dual voltage; Monitor two separate voltages and transformers on the same meter simultaneously

• Displays total harmonic distortion, waveform capture, phasor plot in real time

• 4-in-1 eld selectable network communications: BACnet IP, MS/TP, Modbus TCP/RTU

• 1.8 KHZ processor; updates data every second

• Phase-Check verication shown on display

• Pluggable terminal blocks for easy wiring and verication

• Backlit display

• UL listed (enclosure option); UL recognized (mounting plate option)

• NEMA 1 enclosure or circuit board only models available

• Phase loss alarm relay

• 125 communication object points/registers per meter to choose from

• On-board 12 V power supply for external sensors

• 5 year warranty, BTL certied

Applications:

• High Density Electrical Distribution Panels

• Demand Side Management

• Preventative Maintenance

• Retail Store Lighting Loads

• LEED Projects

• Chiller Optimization

Power Battalion 48

Networked Power Meter

ORDERING INFORMATION

S P B 84

Model Enclosure Display Options

SPB48= Setra Power Battalion 48 C Enclosure D Display N None

P Mounting Plate N No Display

SPECIFICATIONS

900900-G USB Communication Cable, Type A to B

900901-G USB Flash Drive, HeadStart Software

SPP-ACC-LEADS-208 Voltage Leads 208 VAC

SPP-ACC-LEADS-480 Voltage Leads 480 VAC

SPP-ACC-FUSE-208 Fuse Leads 208 VAC

SPP-ACC-FUSE-480 Fuse Leads 480 VAc

ACCESSORIES

Technical Communications

Service Type Single Phase, Split Phase, Three Phase-Four Wire (WYE), Three Phase-Three Wire (Delta) Hardware RS-485, Ethernet, and USB (for conguration only)

Power From L1 Phase to L2 Phase, 90-600 VAC RMS CAT III 50/60Hz, 500mA AC Max Supported Protocols Modbus (using SunSpec IEEE-754 single precision oating point model), or BACnet

AC Protection 0.5A Fuse 200kA interrupt capacity Max Distance 1,200 meters with Data Range of 100k bits/second or less

Power Out Unregulated 12 VDC output, 200 mA, self-resetting fuse. Supported Baud Rates 9600, 19200, 38400, 57600, 76800, 115200 baud

Voltage Channels 80-346 Volts AC Lint-to-Neutral, 600V Line-to-Line, CAT III. Two voltage reference inputs Data Bits 8 Current Channels 48 channels, 0.525 VAC max, 333 mV CTs, 0-4,000+ Amps depending on CT Parity None, Even, Odd

Maximum Current Input

Measurement Type True RMS using high-speed digital signal processing (DSP) with continuous sampling Data Formats Modbus, BACnet MS/TP, Modbus TCP or BACnet IP

Line Frequency 50/60 Hz

Waveform Sampling 1.8 kHz Wire Connections 12-22 AWG

Parameter Update Rate 1 second Mounting Panel Mount/Enclosure

Measurements

Accuracy 0.2% ANSI C12.20-2010 Class 0.2 Mounting Plate Available with Circuit Board Only model

Resolution Values reported in IEEE-754 single precision oating point format (32 bit) Operating Temperature1-20° to +60°C (-4° to 140°F)

Display 4-line display, tri-color backlight (PhaseChekTM) Humidity 5% to 95% non-condensing

Pulse Output

Certications

UL Recognized Mounting plate version

UL Listed Indoor enclosure version Operating System Windows® 10, Windows® 8, Windows® 7

CE Compliant Yes Communications Ethernet or USB. One free USB port required on PC

ANSI C12.20 Class 0.2 NIST Traceable Calibration Security 2 password levels

-20°C LCD display could be illegible. Meter voltage @ -20°C must exceed 100 VAC to power the meter.

150% of current transducer rating (mV CTs) to maintain accuracy. Measure up to 4000 A with Rogowski Coil CTs

Volts, Amps, kW, kVAR, kVA, aPF, dPF, kW demand, kVA demand, Import (Received) kWh, Export (Delivered) kWh, Net kWh, Import (Received) kVAh, Export (Delivered) kVAh, Net kVAh, Import (Received) kVARh, Export (Delivered) kVARh, Net kVARh, THD, Theta, Frequency. All parameters for each phase and system total.

Open Collector, 5mA max current, 40V max open voltage.

Stop Bit 2,1

Mechanical

PCBA Mounting 0.5” Standos #6 (Quantity 6)(user supplied)

High Voltage Cover IP40

Enclosure ABS Plastic, 94-V0 ammability rating

Enclosure Dimension

PCBA Dimensions

(L) 26.5cm x (W) 24.8cm x (H) 7.6CM (L) 14.25” x (W) 9.75” x (H) 3.0”

(L) 21.6cm x (W) 21.6cm x (H) 6.4cm (L) 8.5” x (W) 8.5” x (H) 2.5”

Headstart Software

Specications subject to change without notice.

MODBUS REGISTER/BACNET OBJECT DESCRIPTION LIST

System True Energy (kWh) Individual Phase to Phase Voltages Average Current (Amps)

Instantaneous Total True Power (kW) Line Frequency (Hz) Average Line to Line Voltage (Volts)

Peak Demand (Adjustable Window) (kW) Individual Phases True Energy (kWh) Average Line to Neutral Voltage (Volts)

Maximum Instantaneous Power (kW) Individual Phases True Power (kW) Multiple Meters External Data Synchronization

System Reactive Energy (kVARh) Individual Phases Reactive Energy (kVARh) Individual Phases Displacement Power Factor (dPF)

System Apparent Energy (kVAh) Individual Phases Reactive Power (kVAR) Individual Phases Current (Amps)

System Apparent Power (kVA) Individual Phases Apparent Energy (kVAh) Individual Phases Line to Neutral Voltages (Volts)

System Displacement Power Factor (dPF) Individual Phases Apparent Power (kVA) Individual Phases Line to Line Voltages (Volts)

System Apparent Power Factor (aPF) Individual Phases Apparent Power Factor (aPF) Refer to Operating Manual For Complete List

SSP-SPB48 Rev. A 11/17