Setra Patrol Flex Specifications

Patrol Flex

Rogowski Coil

SPECIFICATIONS

General Specications Specications

Probe and Cable Material TPE rubber, reinforced insulation

Couplings Material Polypropylene, UL94 V-0 Current Range 6000 A AC RMS

Probe Cable Length 610 mm Accuracy ± 1% of reading

Probe Cable Diameter 12.4 mm Linearity (10% to 100%

Probe Cable Bend Radius 40 mm Working Voltage (see

Output Cable Length 2.5 meters RG58 Safety Specications

Output Connector Unterminated

Operating Range -20° to +90° C

Storage Temperature -40° to +105° C

Operating Humidity 15% to 85% (non condensing)

Degree of Protection (Probe) IP41

DESCRIPTION

Oered in 12”, 24” and 36” lengths, the Patrol Flex is the most accurate Rogowski Coil in submetering. Rogowski Coils oer signicant installation advantages over split-core CT’s because of its light weight, wide current range (10-4000+ Amps), mechanical exibility for mounting in tight quarters and its easy placement around cable bundles or large bus bars.

The Setra Patrol Flex is an AC current probe utilizing the Rogowski principle. The exible and lightweight measuring head allows quick and easy installation in hard to reach areas, without batteries or an external power source. The Flex clamp ts around bus bars and large or hard-to-

reach conductors.

UL94 V-0, Colour: RED Munsell 7.5 R 1/14

Voltage Output (@1000 ARMS, 50 Hz)

of range)

Safety Standards section)

Safety Standards

111 mV

(@ 25°C, 50 Hz)

± 0.2% of reading

1000 V AC RMS or DC (head) 30 V max. (output)

-BS EN 61010-1 2001

- BS EN 61010-2-032 2002

-BS EN 61010-031 2002, 1000 VRMS, Category III, Pollution Degree 2

-Use of the probe on uninsulated conductors is limited to 1000 V ACRMS or DC and frequencies below 1 kHz.

ORDERING INFORMATION

C T P F

Name Probe Length

PF Patrol Flex 12 12”

24 24”

36 36”