SES imagotag EDG1-0600-A, EDG1-0270-B, EDG1-0270-A User Manual

G1 Labels Product Specification

Last change: 16.08.2018

G1 Labels Product Specification

1 Label Family Introduction 4

1.1 General Key Features 4

1.2 The G1 label family 5

2 Barcode Information 6

2.1 Serial Number 6

2.1.1 Producer is 01 7

2.1.2 Producer is not 01 7

3 Mechanical Characteristics 8

3.1 Technical characteristics 8

3.1.1 G1 1.6 BWR 8

3.1.2 G1 2.2 BWR 9

3.1.3 G1 2.6 BWR and G1 2.7 BW / BWR 9

3.1.4 G1 4.2 BW / BWR and G1 4.4 BW / BWR 10

3.1.5 G1 4.5 BWR 10

3.1.6 G1 6.0 BWR 11

3.1.7 G1 7.4 BW/BWR 11

3.1.8 S-tag 6 HF 12

3.2 Mechanical Dimensions 12

3.2.1 G1 1.6 BWR 12

3.2.2 G1 2.2 BWR 12

3.2.3 G1 2.6 BWR 13

3.2.4 G1 2.7 BW/ BWR 13

3.2.5 G1 4.2 BW /BWR 13

3.2.6 G1 4.4 BW/ BWR 14

3.2.7 G1 4.5 BWR 14

3.2.8 G1 6.0 BWR 15

3.2.9 G1 7.4 BW/ BWR 15

4 Electrical & RF Characteristics 17

4.1 Power and Current Consumption 17

4.2 Transmission power 17

5 NFC 18

5.1 Functionality 18

5.1.1 Application 18

5.1.2 Redirection/Forwarding (for demo purposes only) 19

5.2 Ordering Information 19

6 Environmental 20

6.1 General 20

6.2 Cleaning Instructions 20

6.3 Humidity Conditions 20

7 Storage and warehousing 21

8 Battery lifetime 22

Page 2 of 31

G1 Labels Product Specification

9 Battery Replacement 23

9.1 Audience 23

9.2 Instructions 23

9.3 Steps 23

9.3.1 G1 1.6 BWR 23

9.3.2 All labels except G1 1.6 BWR 23

10 Reliability Test Items 24

11 Certifications 25

11.1 Types 25

11.2 Overview 25

11.3 Applied Standards 25

11.4 Declaration 26

11.4.1 FCC 26

11.4.2 IC 26

11.4.3 IFT 26

11.4.4 NCC 警語: 26

12 Packing 27

12.1 G1 1.6 BWR 27

12.2 G1 2.2 BWR 27

12.3 G1 2.6 BWR 27

12.4 G1 2.7 BW/ BWR 28

12.5 G1 4.2 BW/BWR 28

12.6 G1 4.4 BW / BWR 28

12.7 G1 4.5 BWR 29

12.8 G1 6.0 BWR and G1 7.4 BW / BWR 29

13 Intended Use 30

14 Improper Use 31

Page 3 of 31

G1 Labels Product Specification

1 Label Family Introduction

The SES-imagotag electronic shelf label family offers high-quality display options, operating with a replaceable battery, thus working without any external power supply.

The performance of the labels (updates per hour) depends on the mode of the access point. In the USA and Canada the AP-2010 usa/canada bundle incl. antenna with limited data efficiency is required (based on the FCC/ICregulation).

1.1 General Key Features

l 2.4 GHz proprietary radio protocol l Radio coverage: up to 25 meters l Bi-directional communication l 11 available communication channels l Ultra-low power consumption l Customer-replaceable battery l Full graphical e-Ink display with paper-like readability l Different configurations available (theft protection, display protection, LED flash) l Label versions for deep-freezing environments l Super wide viewing angle (nearly 180 degrees) l Flexible mounting options available l May be used in landscape and portrait mode l Fast response time (less than 15/30 seconds, depends on wakeup time) l 128-bit AES encryption with secure key exchange l Multiple pages support with preloading and fast page switching l Integrated Passive NFC tag

Page 4 of 31

G1 Labels Product Specification

1.2 The G1 label family

The SES-imagotag G1 BWR label family is capable of changing all pixels to black, white or red. The current line-up has display sizes from 1.6 inch to 12.2 inch.

Capt ion

G1 1.6 BWR NF C 152 x 152 140 b/w/r 4* 27.5 x 27.5 7500/4600 1

G1 2.2 BWR NF C 212 x 104 111 b/w/r 4* 48.6 x 23.8 8500/5000 2

G1 2.6 BWR NF C 296 x 152 125 b/w/r 4* 60.1 x 30.7 4500/2600 2

G1 2.7 BW NFC 264 x 176 117 b/w 8* 57.3 x 38.2 5000/2700 4

G1 2.7 BWR NF C 264 x 176 117 b/w/r 4* 57.3 x 38.2 4500 2

G1 4.2 BW NFC 400 x 300 120 b/w 4* 84.8 x 63.6 3000/1600 4

G1 4.2 BWR NF C 400 x 300 120 b/w/r 4* 84.8 x 63.6 2000/1300 2

G1 4.5 BWR NF C 480 x 176 117 b/w/r 4* 104.2 x 38.2 2500/1500 2

G1 6.0 BWR NF C 600 x 448 129 b/w/r 4* 114.9 x 85.8 900/500 2

G1 7.4 BW NFC 480 x 800 126 b/w 12* 97 x 161.6 1000/500 8

G1 7.4 BWR NF C 480 x 800 126 b/w/r 4* 97 x 161.6 600/300 2

G1 12.2 BWR NFC 768 x 960 103 b/w/r 6*

Display Res-

olution

Density

(dpi)

Display Colo rs

Useable

Pages

Active Dis-

play Area

(mm)

190.08 x

237.60

Upd ates/h ou r/AP

(standard /

FCC&IC mode)

300/150 2

Batt ery life-

time: 5 years with N updates

per day

*One useable page is shared with the registration code page. This page is initially shown when the label is shipped. After registration this page can be used as a custom page. To restore the original content a service utility is required. To prevent accidentials overwrite this page is protected. To unlock this page contact the SES-imagotag support team.

The content of all pages except page number 0 won't remain after a firmware update.

Page 5 of 31

G1 Labels Product Specification

2 Barcode Information

The labels come with a label ID (which is a unique identifier – just like a MAC address) and this label ID as a barcode on the display (and printed on the back of the label).

The label ID consists of 8 hexadecimal digits (0-9 / A-F). The first 2 digits identify the different label types, shown on the following table:

Caption Label-ID Product Code Model Code

G1 1.6 BWR NFC F1xxxxxx R16N01xxx EDG1-0160-A

G1 2.2 BWR NFC A5xxxxxx

G1 2.6 BWR NFC B6xxxxxx

G1 2.7 BW NFC B3xxxxxx

G1 2.7 BWR NFC B5xxxxxx R27N01xxx EDG1-0270-B G1 4.2 BW NFC C7xxxxxx B42N01xxx EDG1-0420-A G1 4.2 BWR NFC C5xxxxxx R42N01xxx EDG1-0420-A

G1 4.4 BW NFC C1xxxxxx

G1 4.4 BWR NFC C4xxxxxx R44N01xxx EDG1-0440-A G1 4.5 BWR NFC C6xxxxxx R45N01xxx EDG1-0450-A G1 6.0 BWR NFC D4xxxxxx R60N01xxx EDG1-0600-A

G1 7.4 BW NFC D1xxxxxx

G1 7.4 BWR NFC D3xxxxxx R74N01xxx EDG1-0740-A

R22N01xxx R22N02xxx R26N01xxx R26N02xxx G1Bxxxxxx B27N01xxx

G1Cxxxxxx B44N03xxx

G1Dxxxxxx B74N05xxx B74N03xxx

EDG1-0220-A

EDG1-0260-A

EDG1-0270-B

EDG1-0440-A

EDG1-0740-A

2.1 Serial Number

Depends on Producer (A)

Page 6 of 31

G1 Labels Product Specification

2.1.1 Producer is 01

Part

Description

Format Example Comment Source

Specified by SES-

A Producer 2 alpha 01

imagotag once for each fab

Product family Product version

Product revision

3 alpha G1B

3 alpha 301

3 alpha 001

Incremented on every change of product specification

Specified by SESimagotag in the product specification document

- Separator “-“ - Fixed E Internal 1 alpha B Internal F Year 1 dec 4 4=2014, 5=2015,...

G Week 2 dec 10

H Weekday 1 dec 3

I Internal 5 dec 00060

Format:

Example:

AABBBCCCDDD-EFGGHIIIII

01G1B301001-B410300060

Calendar week in current year (01-53)

Continuous Serial Number (Counter)

Calculated during production

2.1.2 Producer is not 01

Part

A Producer

- Separator “-“ - Fixed

E Year

F Week 2 dec 13

G Internal 6 dec 000065

Format:

Example:

Note: Calendar week date is calculated according to ISO 8601 (see http://en.wikipedia.org/wiki/ISO_

week_date)

Description Format Example

Product family Product version

Product revision

Comment Source

2 alpha

3 alpha 3 alpha

3 alpha

1 alpha

R22

N01 N = with NFC

Incremented on every

001

change of product specification

E=2014, A=2010, B=2011,..

Continuous Serial Number (Counter)

AABBBCCCDDD-EFFGGGGGG

02G1B302001-E13000065

Specified by SESimagotag once for each fab

Specified by SESimagotag in the product specification document

Calculated during production

Page 7 of 31

G1 Labels Product Specification

3 Mechanical Characteristics

3.1 Technical characteristics

The G1 labels are made of several external parts:

1. Battery Cover including a. Label ID b. Label ID barcode

c. S/N

2. Battery pack /Coin cell

3. Main Unit including a. Back Cover b. PCB

c. Display

d. Transparent Front Cover

4. Front Cover Frame a. Customizable in design and color b. Replaceable

3.1.1 G1 1.6 BWR

Page 8 of 31

G1 Labels Product Specification

3.1.2 G1 2.2 BWR

3.1.3 G1 2.6 BWR and G1 2.7 BW / BWR

Page 9 of 31

G1 Labels Product Specification

3.1.4 G1 4.2 BW / BWR and G1 4.4 BW / BWR

3.1.5 G1 4.5 BWR

Page 10 of 31

+ 21 hidden pages