SES imagotag APG2 PCIA B User Manual

SES-imagotag GmbH I St. Peter Gürtel 10b I A-8042 Graz - AUSTRIA
FB: FN350927w I HG : Graz I UID : ATU65936017 I WEEE : DE 65879240
T. [phone] I F. [phone] I E. [e-mail] I www.ses-imagotag.com

1

V:IoT

APG2-PCIA-B

module

Installation manual

Version: 1.0
Date: 2019-07-04

SES-imagotag GmbH I St. Peter Gürtel 10b I A-8042 Graz - AUSTRIA
FB: FN350927w I HG : Graz I UID : ATU65936017 I WEEE : DE 65879240
T. [phone] I F. [phone] I E. [e-mail] I www.ses-imagotag.com

2

Table of Contents

1 General .......................................................................................................................... 3

2 Description ..................................................................................................................... 5

3 Specification ................................................................................................................... 6

4 Installation ...................................................................................................................... 7

5 Labeling ......................................................................................................................... 8

6 Declaration ..................................................................................................................... 9

SES-imagotag GmbH I St. Peter Gürtel 10b I A-8042 Graz - AUSTRIA
FB: FN350927w I HG : Graz I UID : ATU65936017 I WEEE : DE 65879240
T. [phone] I F. [phone] I E. [e-mail] I www.ses-imagotag.com

3

1 General

This is OEM installation manual for APG2-PCIA-B module.
If you have any problems with installation, please contact the SES-imagotag Support Team

([e-mail]).
If there are questions regarding AP in which this module is installed, please contact AP

manufacturer directly.

Figure 1 – APG2-PCIA-B module photo

Figure 2 – Retail IoT Connector Cisco Aironet 3800