SES imagotag AP0002 User Manual

Product Specification AP-2010

Last change: 27.03.2017

Product Specification AP-2010

1 Introduction 4

1.1 Key Features 4

1.2 Destination countries 4

1.3 Scope of delivery 4

2 Barcode Information 5

2.1 Serial Number 5

3 Mechanical Characteristics 7

3.1 Mechanical Dimensions 7

3.2 Front, Side and Top View 7

3.3 Upper Surface 8

3.4 Side View 8

3.5 Rear View 9

4 Mounting 10

4.1 Audience 10

4.2 General Instructions 10

4.3 Instructions for the Mounting Location 10

4.4 Approachability 11

4.5 Screw of the Antenna 11

4.6 Metal Bracket for Mounting on Wall, Ceiling or T-Mounting Rail 12

4.7 Mounting on Wall or Ceiling 12

5 Electrical Specifications 15

5.1 Used Channels 15

5.2 Difference WiFi and ESL protocol 15

5.3 Cabel Specifications 15

5.4 Power Supply Specifications 16

5.5 Pinout RJ45 Ethernet 16

6 Electrical & RF Characteristics 17

6.1 General Technical characteristics 17

6.2 Power and Current Consumption 17

6.3 General Specifications 17

7 Environmental 19

7.1 Humidity and Operating Conditions 19

Page 2 of 27

Product Specification AP-2010

7.2 Storage Conditions 19

7.3 Cleaning Instructions 19

8 Packing 20

8.1 Packing Dimensions 20

8.2 Illustrations 20

8.3 Palletization 21

9 Certifications 22

9.1 Types 22

9.2 Overview 22

9.3 Applied Standards 22

9.4 Declaration 22

10 Problems which requiring maintenance or replacement of the AP-2010 24

11 Intended Use 25

12 Improper Use 26

13 Warranty 27

Page 3 of 27

Product Specification AP-2010

1 Introduction

The Access Point AP-2010 by imagotag is a network device similar to WLAN access points that is required for communication with the imagotag electronic shelf labels (transmits price information to the labels).

Up to 10 000 labels can be managed per access point and the self-organizing network allows automatic roaming of labels without manual handling. The high transmission rate of the 2.4 GHz wireless technology and the intelligent task scheduling enables fast and secure updates on imago G1 labels of all sizes.

This document is the technical specification of the Access Point AP-2010.

In the USA and Canada the AP-2010 usa/canada bundle incl. antenna with limited data efficiency is required according to the FCC/IC regulations. This bundle has a reduced data efficiency for label/updates/hour, for more details see label product specification.

1.1 Key Features

l Manages up to 10 000 imago G1 labels of all sizes l Covers up to 1 950 m² (depending on shop layout) l Low power consumption – powered by PoE (Power over Ethernet) or with low power plug l Easy configuration and monitoring l Optimized scheduling of tasks and self-managed roaming of labels

1.2 Destination countries

The imagotag AP-2010 is currently intended for use in Europe, Canada and USA. More countries will follow.

1.3 Scope of delivery

l 1 pcs imagotag AP-2010 l 1 pcs 2.4-2.5GHz 5dBi antenna l 1 pcs metal mounting l 1 pcs “caddy® clips 4G16M11“ from Erico® l 2 pcs self-locking nuts M6

May vary depending on configuration

Page 4 of 27

Product Specification AP-2010

2 Barcode Information

The AP-2010 comes with an AP-ID, P/N, MAC and S/N. The AP-ID consists of 5 decimal digits (0-9).

Product Code: A1A001xxx

2.1 Serial Number

Depends on Producer (A)

2.1.1 Producer is 01

Part Description Format Example Comment Source

A Producer

- Separator “-“ - Fixed

E Internal

F Year 1 dec 4 4=2014, 5=2015,...

G Week 2 dec 10

H Weekday 1 dec 3

I Internal 5 dec 00060

Product family

Product version

Product revision3alpha

2 alpha

3 alpha

1 alpha

G1B

301

Incremented on every

001

B Internal

change of product specification

Calendar week in current year (01-53)

Continuous Serial Number (Counter)

Specified by imagotag once for each fab

Specified by imagotag in the product specification document

Calculated during production

Page 5 of 27

Product Specification AP-2010

2.1.2 Producer is not 01

Part Description Format Example Comment Source

Specified by imagotag once for each fab

Specified by imagotag in the product specification document

A Producer

Product family

Product version

Product revision3alpha

2 alpha

3 alpha

R22

N01 N = with NFC

Incremented on every

001

change of product specification

- Separator “-“ - Fixed

E Year

1 alpha

F Week 2 dec 13

G Internal 6 dec 000065

Format:

Example:

AABBBCCCDDD-EFFGGGGGG

02G1B302001-E13000065

E=2014, A=2010, B=2011,..

Calculated during production

Continuous Serial Number (Counter)

Note:

l Calendar week date is calculated according to ISO 8601 (see http://en.wiki-

pedia.org/wiki/ISO_week_date

Page 6 of 27

Product Specification AP-2010

3 Mechanical Characteristics

3.1 Mechanical Dimensions

l With antenna:

Outline (mm): 226 x 135 x 45

Weight: 350 g

l Without antenna:

Outline (mm): 196 x 135 x 45

Weight: 320 g

3.2 Front, Side and Top View

FIGURE 1-1: Front, side and top view of the AP-2010

1 Mounting plate fixation screw-

hole

2 LED 4 Antenna

3 Antenna socket

Page 7 of 27

Product Specification AP-2010

3.3 Upper Surface

FIGURE 1-2: Top view of the imagotag AP-2010

5 Connection for the Power Supply 8 Restart

6 LAN/PoE 9 Reset to Factory Settings

7 Console

3.4 Side View

FIGURE 1-3: Side view of the imagotag AP-2010

10 Antenna Connector (unused) 12 Snap Connector Housing

11 Warranty Seal

Page 8 of 27

Product Specification AP-2010

3.5 Rear View

FIGURE 1-4: Rear view of the imagotag AP-2010

13 Mounting Tab 17 Snap Connector Housing

14 Mounting Rail 18 Housing Screw

15 Locking Tab 19 Mounting Profile

16 Label

Page 9 of 27

+ 18 hidden pages