SERVIS WD7512F4W,LD752W User Manual

User Manual

Model Number: WD7512F4W

Customer Support Helpline

0333 577 7232

LD752W

Contents

01 Welcome

02 Safety Instructions

07 Your Washer Dryer

10 Technical Specifi cation

11 Installation

19 Usage

41 Maintenance

47 Clothing Care

51 Troubleshooting

57 Guarantee

59 Index

T: 0333 577 7232T: 0333 577 7232

01 02

T: 0333 577 7232 T: 0333 577 7232

WELCOME SAFETY INSTRUCTIONS

To ensure your safety and the safety of others, please read the following safety
precautions before you operate your Washer Dryer.

Your Washer Dryer conforms to current safety requirements. Inappropriate use can,

however, lead to personal injury and damage to property. To avoid the risk of accidents and
damage to your Washer Dryer, read this user guide carefully before using it for the first time.
It contains important information on the installation, safet y, use and maintenance of your
Washer Dryer. Retain this user guide for future use and pass it on to any new owners.

Read this user guide before using or installing your Washer Dryer.

WELCOME

Thank you for choosing this Ser vis Washer Dryer, which has been designed and manufactured to
give you many years of trouble-free ser vice.

You may already be familiar with using a similar product but please take time to read these
instructions, which have been written to ensure you get the very best from your purchase.

Servis provides you with a guarantee which will protect you should your Washer Dryer develop
an electrical or mechanical fault during the guarantee period. To ensure that you get a prompt
and efficient ser vice, please register your Washer Dryer immediately.

You will find a warranty card included within the packaging. To register, complete the form, or:

Visit us at w ww.servis.co.uk

Call us on 0333 577 7232

ITEMS INCLUDED

Spin

Daily Fast

Gentle Dry

Cotton Dry

Quick Wash & Dry

Cotton Wash & Dry

Rapid 15'

Cotton

Cotton Eco

Eco 20°C

Synthetics

Wool

Curtain

Rinse

Allergy Safe

Display Functions

Start/PauseDelayDry levelSpinTemp

60' 60 C

o

Fill hose

Blanking caps x 4

Fluid detergent level plate

Washer Dryer

Figure 1

SAFETY INSTRUCTIONS

WARRANTY

03 04

T: 0333 577 7232 T: 0333 577 7232

SAFETY INSTRUCTIONS

Your Washer Dryer is for domestic use only and is only intended to wash and dry items

which are specified by the manufacturer to be machine washable and dryable on the label,
and textiles composed of hand washable wool or wool blend fabrics as well as satin, lace,
silk and other hand-washable garments. Do not use your Washer Dryer for any purpose not
expressly specified in this user guide.

This appliance can be used by children aged from 8 years and above and persons with

reduced physical, sensory or mental capabilities or lack of experience and knowledge if they
have been given super vision or instruction concerning use of the appliance in a safe way and
understand the hazards involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.

Before setting up your Washer Dryer, check for any external visible damage. Do not install

or use your Washer Dryer if it is damaged.

Before setting up your Washer Dryer, remove the four transit bolts and the rubber washers

from the back of the machine (refer to page 11).

Some water may be left in your Washer Dryer as a result of quality checks during

production. This will not affect the operation of your Washer Dryer.

Before connecting your Washer Dryer, ensure that the information on the data plate (voltage

and connected load) matches that of the mains electricity supply. If in doubt, consult a
qualified electrician.

Do not connect your Washer Dryer to the mains electricity supply using an extension lead.

A damaged power cord/plug can cause fire or give you an electric shock. When damaged it

must be replaced, this should only be done by qualified personnel.

Make sure that the door of your Washer Dryer is not restricted and can be opened fully.

Exhaust air must not be discharged into a flue which is used for exhausting fumes from

appliances burning gas or other fuel.

Make sure hoses and cables do not cause a trip hazard.

Never remove the plug from the socket by pulling the cord. Always hold the plug.

Never touch the power cord/plug with wet hands as this could cause a short circuit or

electric shock.

Do not touch your Washer Dryer if your hands or feet are wet.

Do not keep flammable or explosive chemicals near your Washer Dryer.

Fault y components must only be replaced by a suitably qualified Service Agent using

genuine spare parts.

Unauthorised repairs could result in unforeseen dangers for the user. Repairs should only be

undertaken by an approved service agent.

In the event of a fault or for cleaning purposes, your Washer Dryer is only completely

isolated from the electricity supply when it is unplugged from the mains.

Your Washer Dryer must only be connected to your water supply using the supplied new fill

hose. Old hoses must not be reused.

Do not make any alterations to your Washer Dryer, unless authorised to do so by Servis.

The packaging of the machine could be hazardous to children. Do not allow children to play
with the packaging or small parts from the Washer Dr yer. Please refer to the disposal
instructions on the rear cover.

05 06

T: 0333 577 7232 T: 0333 577 7232

SAFETY INSTRUCTIONS

Do not climb on your Washer Dryer.

Do not turn your Washer Dryer upside down or on its side.

Do not lift your Washer Dryer using the door or detergent drawer.

Please ensure that you have removed all of the packaging materials and protective tape

from the outside of your Washer Dr yer, inside the drum and inside the detergent drawer
before using.

Do not exceed the maximum load for the washing or drying programme you have chosen.

Never force the door open when your Washer Dryer is running.

Never open the detergent drawer while the machine is running.

Thoroughly rinse off any chemicals such as stain remover from your garments before

beginning a washing and drying programme.

Please follow the manufacturers’ instructions regarding the use of fabric conditioner or any

similar products that you intend to use in your Washer Dryer.

Residue may build up on detergent and softeners exposed to air for a long period of time.

Only put softener or detergent in the drawer at the beginning of each wash.

Please ensure that garments loaded into your Washer Dr yer are free from foreign objects such

as nails, needles, lighters and coins.

Do not stop your Washer Dryer before the dr ying phase of a programme has been

completed.

Do not touch the door, drain hose or any discharged water while your Washer Dryer in

running. The high temperatures involved pose a burn risk.

Do not use a detergent ball/device if you have selected a washing and drying programme as
this may cause a fire hazard.

Open the drum door fully after the drying process. Do not touch the door glass. It will reach
high temperatures and pose a burn risk.

Clean the pump filter regularly.

The necessary ambient temperature for operation of your Washer Dryer is 15-25 °C.

Where the temperature is below 0 °C, hoses may split or the electronic card may not
operate correctly.

Unplug your Washer Dryer and switch off the water supply if the Washer Dr yer is left
unused for a long time. We also recommend that you leave the door open to prevent build
up of humidity inside the Washer Dryer.

Do not dry your laundr y under the conditions specified below as they present a fire risk:

If the laundry is not washed.

If oil based stains are not pre-treated before beginning a washing or drying programme.

Laundry that has a high amount of sponge, foam, rubber or rubber like parts and

accessories.

Rubber, sponge, latex, shower bonnets, watertight tex tile products, rubber based objects

and clothes or pillows filled with rubber sponge must not be dried in your Washer Dryer.

07 08

T: 0333 577 7232 T: 0333 577 7232

Spin

Daily Fast

Gentle Dry

Cotton Dry

Quick Wash & Dry

Cotton Wash & Dry

Rapid 15'

Cotton

Cotton Eco

Eco 20°C

Synthetics

Wool

Curtain

Rinse

Allergy Safe

Display Functions

Start/PauseDelayDry levelSpinTemp

60' 60 C

o

YOUR WASHER DRYER

1

4

FRONT VIEW REAR VIEW

Detergent drawer

2

Control panel

Door handle

5

Pump filter cover

Drain hose

1

2

Cold water
inle

t

Figure 2

Figure 3

1

Detergent drawer; Allows you to insert detergent, fabric conditioner and starch.

2

Programme dial; Allows you to select the programme for your wash.

3

Control panel; Allows you to configure the required settings for your wash.

4

Door handle; Provides you with access to the drum.

5

Pump filter cover; Provides access to the pump filter for maintenance purposes.

1

Drain hose; Provides an outlet for the dirty water from your Washer Dryer.

2

Cold water inlet; Connects your Washer Dryer to your cold water supply.

2

Transit bolts; Remove before first use of your Washer Dryer (refer to page 9).

3

Programme dial

3

Tra nsit bolts

3

09 10

T: 0333 577 7232 T: 0333 577 7232

YOUR WASHER DRYER

DETERGENT DRAWER

TECHNICAL SPECIFICATION

TECHNICAL SPECIFICATION

Voltage V/Frequency (Hz) 220-240V/50Hz

Electrical Current (A) 10

Power Rating (W) 2200

Water Consumption (l/Cycle)
(Washing, Spinning and Drying)

118

Energy Consumption(kWh/Cycle)
(Washing, Spinning and Drying)

5.67

Energy Consumption(kWh/Cycle)
(Washing and Spinning only)

1.2 3

Unpacked Dimensions (H x W x D) (cm) 84.5 x 59.7 x 58.2

Gross Weight (kg) 80

Spin Speed (rpm) 1200

Drum Volume (lt) 60

Max Load Capacity (Washing) (kg) 7

Max Load Capacity (Drying) (kg) 5

Energy Rating B

Washing Noise (dB) 58

Spinning Noise (dB) 76

Drying Noise (dB) 66

Figure 4

1

2

3

Main Wash
Co

mpartment

Compartment

Pre-Wash
Compartment

1

Main Wash Compartment; Add detergent for the main wash.

2

Compartment; For fabric conditioner and liquid starch.

3

Pre-Wash Compartment; Add detergent for the pre-wash.

11 12

T: 0333 577 7232 T: 0333 577 7232

INSTALLATION

INSTALLATION REQUIREMENTS

To avoid risk of injury, please take care when moving your Washer Dr yer. It is heavy and we
recommend that a minimum of two people move your Washer Dr yer.
To unpack your Washer Dryer and manoeuvre it to the installation area, one person should hold
it by the front feet and the other person at the edge of the lid at the rear.
Your Washer Dryer measures 84.5 x 59.7 x 58.2cm and will require an installation area with the
space to allow the door to fully open and provide easy access to the plumbing and electrical
connections.
The most suitable installation surface for your Washer Dryer is a concrete floor as it is less
prone to vibration during the spin cycle. Soft floor surfaces such as carpets and rugs are not
suitable.
If you have to install your Washer Dryer on a wooden floor, we recommend that a water­resistant wooden base at least 30mm thick is installed. The base should span several joists and
be bolted down. Check for the presence of pipes and cables before installing.
If possible, install your Washer Dryer in the corner of the room as it is often the most stable part
of the floor.
Do not install your Washer Dryer in rooms where temperatures below freezing may occur as
frozen hoses may burst or split.

REMOVAL OF TRANSIT BOLTS

The transit bolts are used to protect your Washer Dryer from damage during transportation and
must be removed before using your Washer Dryer for the first time. Keep the transit bolts safe
and re-fit them if you need to transport your Washer Dryer in the future.
The four transit bolts are located on the back of your Washer Dryer (fig 5a).
To remove the transit bolts (4 of f):

1

Remove each bolt by turning anti-clockwise with a suitable spanner (fig 5b).

2

Pull out the remaining plastic section of each transit bolt by hand. This will require a

r

easonable amount of force (fig 5c).

3

Inser t the blanking caps (4 off): Push the cap into the hole until the four connectors click into

place. Check that the cap is flush with the machine.

To re-fit the transit bolts (4 off) for future transportation:

1

Pull and remove the four plastic blanking caps.

2

Inser t the plastic sections of the transit bolts into the exposed holes.

3

Inser t the bolts into the plastic sections of the transit bolts and tighten with a suitable

sp

anner until secure.

Figure 5

a:

b:

c:

13 14

T: 0333 577 7232 T: 0333 577 7232

INSTALLATION

ADJUSTING THE FEET

For safe operation, it is important that your Washer Dryer is level and securely positioned on all
four feet. Incorrect installation may cause the Washer Dryer to vibrate and increase your water
and electricity consumption.
The four adjustable feet are used to level the Washer Dryer. To adjust the feet:

1

Loosen the plastic locking nut by turning anti-clockwise (fig 6a).

2

To increase the height of the machine, turn the feet clockwise (fig 6b).

3

To decrease the height of the machine, turn the feet anti-clockwise (fig 6b).

4

After making adjustments, use a spirit level to check that the machine is level.

5

Once the machine is level, tighten the locking nuts by turning clockwise (fig 6c).

WATER SUPPLY CONNECTION

Your Washer Dryer uses an energy efficient cold fill system, which means that only the water
required to wash the laundry is heated. As a result, no heat is lost in the pipeline from the hot
water supply.
Connect your Washer Dryer to your cold water supply only. If your previous machine had a hot
and cold fill, check that the hot tap on your water supply is closed to avoid leakage. Only use the
fill hose supplied and not one from your old Washer Dryer. Only one hose is required to install
your Washer Dryer to the cold water supply. The inlet hose provided with your Washer Dr yer
connects the rear of your machine and the cold water supply.
To connect your Washer Dryer to the cold water supply:

1

Connect the angled end of the fill hose to the cold water inlet on the rear of your Washer

D

ryer by screwing the threaded connector clockwise (fig 7). Take care not to over tighten the

connection. Hand tight is sufficient.

Figure 6

Figure 7

a:

b:

c:

Spin

Daily Fast

Gentle Dry

Cotton Dry

Quick Wash & Dry

Cotton Wash & Dry

Rapid 15'

Cotton

Cotton Eco

Eco 20°C

Synthetics

Wool

Curtain

Rinse

Allergy Safe

Display Functions

Start/PauseDelayDry levelSpinTemp

60' 60 C

o

15 16

T: 0333 577 7232 T: 0333 577 7232

INSTALLATION

WATER SUPPLY CONNECTION

2

Screw the straight end of the hose clock wise to a 19mm (3/4’’) cold water tap until hand

t

ight (fig 8). Take care not to trap or kink the hose.

DRAIN HOSE CONNECTION

Do not connect your Washer Dr yer to a surface water drain.
Connect your Washer Dr yer to your household drainage system (fig 9).
For your Washer Dryer to function properly the outlet end of the drain hose must be at a
minimum of 0cm and a maximum of 80cm from the ground.

CAUTION: Check to ensure that the hose is not trapped, kinked, twisted, folded or crushed.

Do not attempt to extend the drain hose by adding extra sections.

Figure 8

Figure 9

a:

b:

Max height 80cm

Min height 0cm

a: The drain hose
can be connected
to a standpipe, as
shown. The hose
must be between
0cm and 80cm
from the ground.

b: The drain hose
can be connected
to a household
sink, as shown.
The hose must be
between 0cm and
80cm from the
ground.