WASHER
DRYER
User Manual
Model Numbers:
WD1496FGW
WD1496FGS
WD1496FGB
WD1496FGR
REGISTER TO
ACTIVATE YOUR
2 YEAR
GUARANTEE NOW
SERVIS.CO.UK |
0800 0124382 |
Parts & Labour for 2 years. Go to www.servis.co.uk for more information
T: 0800 0124 382
Contents
01 |
Welcome |
02 |
Safety Instructions |
07 |
Your Washer Dryer |
10Technical SpeciÞcation
11Installation
19 |
Setting Up |
25 |
Usage |
62 |
Maintenance |
69 |
Clothing Care |
73 |
Troubleshooting |
81 |
Guarantee |
83 |
Index |
T: 0800 0124 382
WELCOME 
WELCOME
Thank you for choosing this Servis Washer Dryer, which has been designed and manufactured to give you many years of trouble-free service.
You may already be familiar with using a similar product but please take time to read these instructions, which have been written to ensure you get the very best from your purchase.
PowerDry technology allows intensive drying of your garments by accelerating the hot air in your Washer Dryer.
WARRANTY
Servis provides you with a guarantee which will protect you should your Washer Dryer develop an electrical or mechanical fault during the guarantee period. To ensure that you get a prompt and efficient service, please register your Washer Dryer immediately.
You will find a warranty card included within the packaging. To register, complete the form, or:
Visit us at www.servis.co.uk
Call us on 0800 0124 382.
01 T: 0800 0124 382
SAFETY INSTRUCTIONS 
ITEMS INCLUDED
Washer Dryer |
Blanking caps x 4 |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fill hose
Fluid detergent level plate
Figure 1
SAFETY INSTRUCTIONS
To ensure your safety and the safety of others, please read the following safety precautions before you operate your Washer Dryer.
Your Washer Dryer conforms to current safety requirements. Inappropriate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to your Washer Dryer, read this user guide carefully before using it for the first time. It contains important information on the installation, safety, use and maintenance of your Washer Dryer. Retain this user guide for future use and pass it on to any new owners.
Read this user guide before using or installing your Washer Dryer.
T: 0800 0124 382 02
SAFETY INSTRUCTIONS 
Your Washer Dryer is for domestic use only and is only intended to wash and dry items which are specified by the manufacturer to be machine washable and dryable on the label, and textiles composed of hand washable wool or wool blend fabrics as well as satin, lace, silk and other hand-washable garments. Do not use your Washer Dryer for any purpose not expressly specified in this user guide.
Keep children away from your Washer Dryer when in use. To avoid risk of injury do not allow children to play on or near it or to play with its controls.
Before setting up your Washer Dryer, check for any external visible damage. Do not install or use your Washer Dryer if it is damaged. Prolonged intensive use of your Washer Dryer may call for additional ventilation.
Before connecting your Washer Dryer, ensure that the information on the data plate (voltage and connected load) matches that of the mains electricity supply. If in doubt, consult a qualified electrician.
Do not connect your Washer Dryer to the mains electricity supply using an extension lead.
A damaged power cord/plug can cause fire or give you an electric shock. When damaged it must be replaced. This should only be done by qualified personnel.
Never remove the plug from the socket by pulling the cord. Always hold the plug.
Never touch the power cord/plug with wet hands as this could cause a short circuit or electric shock.
Do not touch your Washer Dryer if your hands or feet are wet.
03 T: 0800 0124 382
Never open the detergent drawer while the machine is running.
Faulty components must only be replaced by a suitably qualified Service Agent using genuine spare parts.
Unauthorised repairs could result in unforeseen dangers for the user. Repairs should only be undertaken by an approved service agent.
In the event of a fault or for cleaning purposes, your Washer Dryer is only completely isolated from the electricity supply when it is unplugged from the mains.
Your Washer Dryer must only be connected to your water supply using the supplied new fill hose. Old hoses must not be reused.
Do not make any alterations to your Washer Dryer, unless authorised to do so by Servis.
The packaging of the machine could be hazardous to children. Please refer to the disposal instructions on the rear cover.
Please ensure that you have removed all of the packaging materials and protective tape from the outside of your Washer Dryer, inside the drum and inside the detergent drawer before using.
Your Washer Dryer is not intended for use by people (including children) with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction concerning the use of your Washer Dryer by a person responsible for their safety. Children should be supervised to ensure they do not play with your Washer Dryer.
T: 0800 0124 382 04
SAFETY INSTRUCTIONS 
You must remove the transit bolts before using your Washer Dryer for the first time. Your Washer Dryer will malfunction if operated with the transit bolts still in place.
The necessary ambient temperature for operation of your Washer Dryer is 15-25 0C.
Please ensure that garments loaded into your Washer Dryer are free from foreign objects such as nails, needles, lighters and coins.
Residue may build up on detergent and softeners exposed to air for a long period of time. Only put softener or detergent in the drawer at the beginning of each wash.
Keep the document bag that contained this user manual out of reach of children and babies to prevent the risk of suffocation.
Keep the small items found in the document bag out of reach of small children and babies.
Do not exceed the maximum load for the washing or drying programme you have chosen.
Never force the door open when your Washer Dryer is running.
Please follow the manufacturersÕ instructions regarding the use of fabric conditioner or any similar products that you intend to use in your Washer Dryer.
Do not stop your Washer Dryer before the drying phase of a programme has been completed.
Do not touch the drain hose or any discharged water while your Washer Dryer in running. The high temperatures involved pose a burn risk.
Open the drum door fully after the drying process. Do not touch the door glass. It will reach high temperatures and pose a burn risk.
05 T: 0800 0124 382
Do not keep flammable or explosive chemicals near your Washer Dryer.
Thoroughly rinse off any chemicals such as stain remover from your garments before beginning a washing and drying programme.
Do not use a detergent ball/device if you have selected a washing and drying programme as this may cause a fire hazard.
Do not dry your laundry under the conditions specified below as they present a fire risk:
If the laundry is not washed.
If oil based stains are not pre-treated before beginning a washing or drying programme.
Laundry that has a high amount of sponge, foam, rubber or rubber like parts and accessories.
Rubber, sponge, latex, shower bonnets, watertight textile products, rubber based objects and clothes or pillows filled with rubber sponge must not be dried in your Washer Dryer.
T: 0800 0124 382 06
YOUR WASHER DRYER 
FRONT VIEW 
1 Detergent drawer
2 Control panel
3
Door handle
4 Pump filter cover
1Detergent drawer; allows you to insert detergent, fabric conditioner and starch.
2Control panel; allows you to configure the required settings for your washing and drying.
3Door handle; provides you with access to the drum.
4Pump filter cover; provides access to the pump filter for maintenance purposes.
Figure 2
07 T: 0800 0124 382
REAR VIEW 
|
2 |
Cold water |
|
|
inlet |
3 |
3 |
|
Transit bolts |
Transit bolts |
|
3 |
3 |
|
1 |
|
|
Drain hose |
|
|
1Drain hose; provides an outlet for the dirty water from your Washer Dryer.
2Cold water inlet; connects your Washer Dryer to your cold water supply.
3Transit bolts; please remove before using your Washer Dryer.
Figure 3
T: 0800 0124 382 08
YOUR WASHING DRYER 
DETERGENT DRAWER 
2 |
Compartment |
1 Compartment II |
|
3 Compartment I
1Compartment II; add detergent for the main wash.
2
Compartment; for fabric conditioner and liquid starch.
3Compartment I; add detergent for the pre-wash.
Figure 4
09 T: 0800 0124 382
TECHNICAL SPECIFICATION 
TECHNICAL SPECIFICATION 
Voltage V/Frequency (Hz) |
220-240V/50Hz |
Electrical Current (A) |
10 |
Power Rating (W) |
2200 |
Water Consumption (l/Cycle) |
112 |
(Washing and Drying) |
|
Energy Consumption (kWh/Cycle) |
6.12 |
(Washing and Drying) |
|
Unpacked Dimensions (H x W x D) (cm) |
84.5 x 59.7 x 58.2 |
Gross Weight (kg) |
81 |
Spin Speed (rpm) |
1400 |
|
|
Drum Volume (lt) |
61 |
Max Load Capacity (Washing) (kg) |
9 |
Max Load Capacity (Drying) (kg) |
6 |
Energy Rating |
A |
Washing Efficiency |
A |
Washing Noise (dBA) |
58 |
Spin Noise (dBA) |
77 |
Drying Noise (dBA) |
64 |
T: 0800 0124 382 10
INSTALLATION 
INSTALLATION REQUIREMENTS
To avoid risk of injury, please take care when moving your Washer Dryer. It is heavy and we recommend that a minimum of two people move your Washer Dryer.
To unpack your Washer Dryer and manoeuvre it to the installation area, one person should hold it by the front feet and the other person at the edge of the lid at the rear.
Your Washer Dryer measures 84.5 x 59.7 x 58.2cm and will require an installation area with the space to allow the door to fully open and provide easy access to the plumbing and electrical connections.
The most suitable installation surface for your Washer Dryer is a concrete floor as it is less prone to vibration during the spin cycle. Soft floor surfaces such as carpets and rugs are not suitable.
If you have to install your Washer Dryer on a wooden floor, we recommend that a waterresistant wooden base at least 30mm thick is installed. The base should span several joists and be bolted down. Check for the presence of pipes and cables before installing.
If possible, install your Washer Dryer in the corner of the room as it is often the most stable part of the floor.
Do not install your Washer Dryer in rooms where temperatures below freezing may occur as frozen hoses may burst or split.
REMOVAL OF TRANSIT BOLTS 
The transit bolts are used to protect your Washer Dryer from damage during transportation and must be removed before using your Washer Dryer for the first time. Keep the transit bolts safe and re-fit them if you need to transport your Washer Dryer in the future.
The four transit bolts are located on the back of your Washer Dryer (fig 5a). To remove the transit bolts (4 off):
1 Remove each bolt by turning anti-clockwise with a suitable spanner (fig 5b).
11 T: 0800 0124 382
2Pull out the remaining plastic section of each transit bolt by hand. This will require a reasonable amount of force (fig 5c).
3Insert the blanking caps (4 off): Push the cap into the hole until the four connectors click into place. Check that the cap is flush with the Washer Dryer.
a: b:
c:
Figure 5
To re-fit the transit bolts (4 off) for future transportation:
1Pull and remove the four plastic blanking caps.
2Insert the plastic sections of the transit bolts into the exposed holes.
3Insert the bolts into the plastic sections of the transit bolts and tighten with a suitable spanner until secure.
T: 0800 0124 382 12
INSTALLATION 
ADJUSTING THE FEET
For safe operation, it is important that your Washer Dryer is level and securely positioned on all four feet. Incorrect installation may cause the Washer Dryer to vibrate and increase your water and electricity consumption. Never place cardboard, wood or similar materials under your Washer Dryer to increase stability.
The four adjustable feet are used to level the Washer Dryer. To adjust the feet:
1Loosen the plastic locking nut by turning anti-clockwise (fig 6a).
2To increase the height of the machine, turn the feet anti-clockwise (fig 6b).
3To decrease the height of the machine, turn the feet clockwise (fig 6b).
4After making adjustments, use a spirit level to check that the machine is level.
5Once the machine is level, tighten the locking nuts by turning clockwise (fig 6c).
a: b:
c:
Figure 6
13 T: 0800 0124 382
WATER SUPPLY CONNECTION
Your Washer Dryer uses an energy efficient cold fill system, which means that only the water required to wash the laundry is heated. As a result, no heat is lost in the pipeline from the hot water supply.
Connect your Washer Dryer to your cold water supply only. If your previous machine had a hot and cold fill, check that the hot tap on your water supply is closed to avoid leakage. Only use the fill hose supplied and not one from your old Washer Dryer. Only one hose is required to install your Washer Dryer to the cold water supply. The inlet hose provided with your Washer Dryer connects the rear of your machine and the cold water supply.
To connect your Washer Dryer to the cold water supply:
1Connect the angled end of the fill hose to the cold water inlet on the rear of your Washer Dryer by screwing the threaded connector clockwise (fig 7). Take care not to overtighten the connection. Hand tight is sufficient.
Figure 7
T: 0800 0124 382 14
INSTALLATION 
WATER SUPPLY CONNECTION
2Screw the straight end of the hose clockwise to a 19mm (3/4ÕÕ) cold water tap until hand tight (fig 8). Take care not to trap or kink the hose.
Figure 8
DRAIN HOSE CONNECTION
Do not connect your Washer Dryer to a surface water drain.
Connect your Washer Dryer to your household drainage system (fig 9).
For your Washer Dryer to function properly the outlet end of the drain hose must be at a minimum of 60cm and a maximum of 100cm from the ground.
CAUTION: Check to ensure that the hose is not trapped, kinked, twisted, folded or crushed. Do not attempt to extend the drain hose by adding extra sections.
15 T: 0800 0124 382
a:
Max height 80cm
Min height 0cm
b:
Figure 9
a:The drain hose can be connected to a standpipe, as shown. The hose must be between 0cm and 80cm from the ground.
b:The drain hose can be connected to a household sink, as shown. The hose must be between 60cm to 100cm from the ground.
T: 0800 0124 382 16
INSTALLATION 
The cold water pressure for a normal household system ranges from netween 0.1 to 1 Mpa. Your Washer Dryer will run at optimum efficiency in this range.
Once you have made all of the connections, carefully turn your cold water supply on and check for leaks.
17 T: 0800 0124 382
ELECTRICAL CONNECTION 
Your Washer Dryer requires a 220-240V, 50Hz mains supply. Do not use any other supply.
Your Washer Dryer may be fitted with a moulded plug, which cannot be rewired.
If the fuse cover becomes damaged, you must not use the plug.
If your plug requires changing because it is not suitable for your socket, or it is damaged, you should consult a qualified electrician.
Fuse:
Replacement fuses should be ASTA-approved to BS1362 and have the correct 10 Amp rating.
Replacement fuses can be purchased from an electrical supplier.
T: 0800 0124 382 18
SETTING UP 
CONTROL PANEL OVERVIEW
1 |
2 |
4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3 |
5 |
|||||
1Programme Dial; Allows you to select a washing and drying programme.
2Information Screen; Displays details of the selected programme and information on the status of your Washer Dryer.
3Smart Touch Function Buttons: Allow you to select or adjust a particular function.
4Start/Pause Button: Start or Pause the selected programme.
5Memory Button: Allows you to store preferred settings.
Figure 10
19 T: 0800 0124 382
USING THE SMART TOUCH BUTTONS
A series of 6 smart touch buttons can be found below the information screen. To make a selection, press the button below the desired selection choice on the information screen. For example, if the instructions in this user manual say ÔPress the 
buttonÕ press the button directly below the 
symbol.
SETTING UP YOUR WASHER DRYER
Your Washer Dryer has a range of adjustable features that can be altered to suit your preferences. To make the initial settings please ensure that:
1The transit bolts have been removed.
2Your Washer Dryer has been correctly connected to your water supply and your water drainage system.
3Your Washer Dryer has been connected to an appropriate mains power supply and is switched on at the socket.
4The programme dial is turned on i.e. is not in the ÔSTOPÕ position.
Current Time Setting 
We recommend that you set the correct time during the initial set-up of your Washer Dryer. After turning your Washer Dryer on for the first time it will check to see if you would like to set the current time Ôset day timeÕ will be displayed on the information screen (fig 11).
To set the current time, press the 
button. Alternatively, press the 
button to exit without setting the time.
T: 0800 0124 382 20
SETTING UP 
Figure 11
If you have chosen to set the current time:
Press the 
button under the hour setting until it displays the current hour. Press the 
button under the minute setting until the current time is shown. To confirm the current time setting, press the 
button.
Once you have set the current time, your Washer Dryer will automatically display the main screen of the programme selected by the programme dial. If you would like to make further changes to your settings, press the 
button and use the 
button to select the setting you wish to alter.
You can change the current time setting at any time by pressing the 
button from the main programme screen and selecting the 
button until the time is displayed. Use the 
buttons to increase the hours and minutes.
Please Note: We strongly recommend that you set the current time accurately as other operating features depend on it.
Time setting information will be lost if you leave your Washer Dryer unplugged for more than 15 days. In this case you will be prompted to set the time when you next turn your Washer Dryer on.
21 T: 0800 0124 382
Language Selection Setting 
To select the language used on the information screen, press the 
button. When setting the language for the first time ÔSelect LanguageÕ will appear on the information screen (fig 12).
Figure 12
To change the current language setting press the 
button.
To exit the language selection screen without making a selection, press the 
button.
If you have chosen to change the current language setting:
You can cycle through the available languages using the 
and 
buttons. Press the 
button to select the desired language.
You will be asked to confirm the language selected, for example ÔChange to Turkce?Õ
Press the 
button to confirm the selection, or the 
button to cancel the selection and make another choice.
You can change the language at any time by pressing the 
button. The current language selection will be displayed, for example ÔEnglishÕ. Press the 
and 
buttons to cycle through the available languages and use the 
button to select your choice.
T: 0800 0124 382 22
SETTING UP 
Eco Time Setting (Economic Time Interval) 
To help make savings on your energy bills, your Washer Dryer contains an Eco Time Setting. This allows you to set your Washer Dryer to run during the hours when your electricity tariff is more economical. Please be aware that a smart counter will be required in order for this mode to work. When setting the Economic Time Interval fot the first time:
Press the 
button on the main programme screen and use the 
button until 
and Ôset economic time zoneÕ is displayed on the information screen.
Press the 
button to set Eco Time, or the 
button to return to the main programme screen.
If you have chosen to set Eco Time:
and the start and end time of the economic time interval will be displayed on the information screen (fig 13).
Figure 13
23 T: 0800 0124 382
Use the 
and 
buttons to set the start and finish time for the economic time interval. Press the 
button to confirm the selection, or the 
button to return to the main programme screen.
You can change the Eco Time hours at any time by pressing the 
button from the main programme screen and using the 
button until the Eco Time hours are displayed. Use the 
and 
buttons to set the desired Eco Time interval.
To activate the Eco-Time setting, please refer to the information on additional functions on page 53.
Sound Adjustment 
You can choose to turn the warning sounds of your Washer Dryer on or off. To access the sound settings:
Press the 
button on the main programme screen and then press the 
button until the sound adjustment settings are displayed. This is shown by the 
and 
symbols on the information screen. Alternatively, if you are already in the settings menu, simply use the 
button to navigate to the sound adjustment settings.
Use either the 
or 
buttons to toggle the warning sounds on or off. A 
symbol and 3 audible beeps indicates that the warning sounds are turned on. A 
symbol indicates that the warning sounds are turned off.
To return to the main programme screen, press the 
button, or press the 
button .
Screen Brightness Setting 
You can adjust the brightness setting of the information screen on your Washer Dryer:
Press the 
button on the main programme screen and then press the 
button until the brightness setting screen is displayed. This is shown by the 
symbol. Alternatively, if you are already in the settings menu, simply use the 
button to navigate to the brightness
T: 0800 0124 382 24
Loading...