Server 82540 Owner’s Manual

Fudge Server

MODEL: FS COMPLETE BASE ONLY

120V USA 82500 82066

120V CUSTOM 82955 82066

230V CONT. EUROPE 82510 81020

230V AUSTRALIA 82540 82280

230V UNITED KINGDOM 84620 84750

Fudge Server with Pump

MODEL: FSP COMPLETE BASE ONLY

120V USA 82060 82066

230V CONT. EUROPE 82110 81020

230V CUSTOM 81003 81020

230V AUSTRALIA 82270 82280

230V UNITED KINGDOM 84580 84750

Thank You

...for purchasing our topping warmer.
Its temperature sensing thermostat helps reduce
food costs while delivering a superior product.

SERVE BETTER WITH DISTINCTIVE DESSERTS

SAFETY

According to food and safety regulations, most
foods must be stored and/or served at certain
temperatures or they could become hazardous.
Check with local food and safety regulators for

WARNING-

ELECTRICAL SHOCK COULD OCCUR

This unit must be earthed or grounded.

This requires all three prongs (terminals) on cord
plug to be plugged into power source.

(208-240V)

specific guidelines.

Be aware of the product you are serving and the
temperature the product is required to maintain.
Server Products, Inc. can not be responsible for
the serving of potentially hazardous product.

PARTS

PARTS MAY VARY DEPENDING ON UNIT

FS FSP

LID

82509

PUMP

81320

Page 2

ADAPTER

82507

LADLE

82561

SPACER

82063

WATER
VESSEL
BASIN

BASE
(see cover for
part number)

UNITS 82510, 82540, 84620,
82110, 82270 & 84580 include:

STAINLESS STEEL JAR

94009

UNIT SET-UP

WASH ALL PARTS PROPERLY BEFORE EVERY USE. See page 6.
SEE SEPARATE PUMP MANUAL FOR PUMP INSTRUCTIONS.

FILL WATER VESSEL BASIN

1

• Fill 2.5 cups (20 oz/0.59 liter) of water up to

water level line inside basin.

• Do not overfill.

TIP: Check water levels
throughout the holding period
to ensure even heating.

Filtered water is recommended
to deter corrosion.

INSERT SPACER

2

PUT FOOD CONTAINER INTO

3

WATER VESSEL BASIN

• Product being served must be
inside #10 can or stainless steel jar.

Never place food directly into water
vessel basin of unit.

TIP: Simplify change-outs
with a stainless steel jar.

Order item #94009.

INSTALL LID ACCESSORIES

4

OR PUMP

PRESS SWITCH to the “ON” position.

5

SET THERMOSTAT KNOB

6

to recommended serving temperature.

• Pull knob out to turn and adjust.

• Push knob in to lock.

• Dial indicator uses increments of 5ºF.

• Thermostat range is 75º—210º F.
(24º—99º C)

• To heat unit faster, thermostat may
TEMPORARILY be rotated to maximum.

Page 3