Server 80105 Parts Manual

Page 1
01698-REVA�080414�ENGLISH
KIT 80105
KIT, BEVERAGE STATION, TRIPLE 24 OZ
120V
Series 13H
EZ-CREAM
TM
and INSWEETEN
TM
Page 2
Page 3
Page 4
SAFETY GUIDELINES WHEN USING THIS UNIT:
According to food and safety regulations, most foods must be stored and/or served at certain temperatures or they could become hazardous. Check with local food
and safety regulators for specic guidelines.
Be aware of the product you are serving and the temperature the product is required to maintain. Server Products, Inc. can not be responsible for the serving of potentially hazardous product.
Server Products Inc. claims no responsibility for actual serving temperature of product. It is the responsibility of the user to ensure that any product is held and served at a safe temperature.
Stainless steel is one of the best materials for food serving and storage, but there are many products which can corrode it. If you notice corrosion beginning on any stainless steel surface, you may need to change the cleansing agent, sanitizing agent, or the cleaning procedures you are using.
Products containing: acids, alkalines, chlorine, or salt can corrode stainless steel.
Sauerkraut and Au Jus sauces corrode stainless steel. Server Products, Inc. regrets that we can not honor Warranty claims on stainless steel parts that have been affected by sauerkraut or Aus Jus.
UNIT CLEANING
BEFORE FIRST USE AND AFTER USE DAILY OR REGULARLY, DISASSEMBLE AND CLEAN PARTS. FOR SAFE AND PROPER CARE, AND TO PREVENT CORROSION, OF PARTS, IT IS IMPORTANT TO CLEAN, RINSE, SANITIZE, AND DRY PARTS DAILY OR REGULARLY. FAILURE TO COMPLY WITH ANY OF THESE INSTRUCTIONS MAY VOID UNIT WARRANTY.
1 WASH ALL PARTS WITH DISHWASHING DETERGENT
AND HOT WATER. RINSE THOROUGHLY AND DRY WITH A CLEAN SOFT CLOTH.
A general purpose, nonabrasive cleaner may be used on hard to remove food deposits.
A mildly abrasive NYLON or brass brush may be used to remove any stubborn food or mineral deposits on interior surfaces of unit.
Do not use abrasive cleansers, scrapers, steel pads, steel wool, or other cleaning tools that can scratch surfaces.
Do not use caustic cleansers nor cleansing agents with high concentrations of acid, alkaline or chlorine. These agents can corrode metal parts.
Fully rinsing all parts can help prevent corrosion.
Various elements and minerals, such as chlorides in
tap water, can accumulate on stainless steel parts and create corrosion.
To prevent corrosion on any stainless steel parts, it is important to fully dry with a clean soft cloth regularly.
2 WIPE EXTERNAL SURFACES OF UNIT WITH A CLEAN
DAMP CLOTH. DRY WITH A CLEAN SOFT CLOTH.
A nontoxic glass cleaner may be used for cleaning any stainless steel parts and lid.
3 SANITIZE ALL PARTS FOLLOWING LOCAL
SANITIZATION REQUIREMENTS. ALL PARTS IN CONTACT WITH FOOD MUST BE SANITIZED.
Allow parts to fully air dry after sanitization.
Before sending any item to Server Products for service, repair, or return, contact Server Products customer service to request a Return Authorization Number. Merchandise must be sent to Server Products with this number.
Merchandise being returned for credit must be in new and unused condition and not more than 90 days old and will be subject to a 20% (percent) restocking charge. Electrical parts (thermostats, heating elements, etc.) are not returnable.
Server Products maintains a fully staffed service department with highly skilled factory trained personnel. Service is extremely prompt. Under normal circumstances, a repaired unit is shipped out the day after it is received. Labor charges are reasonable.
SERVICE
Contact your dealer or Server Products Inc. customer service department for the following:
ORDERING REPLACEMENT PARTS
Be prepared to give this information:
Model Letters/Name/Numbers
Part Numbers- P/N
Series Numbers/Letters
Part Description
This information and other important data is stamped on the lid or cylinder of pumps or on the bottom or back side of every unit.
SERVER PRODUCTS LIMITED WARRANTY
All Server Products equipment is backed by a two-year limited warranty against defects in materials and workmanship. For complete warranty information go to: www.server-products.com
Server Products Inc.
3601 Pleasant Hill Road Richfield, WI 53076 USA
262.628.5600
800.558.8722
262.628.5110
spsales@server-products.com
www.server-products.com
Page 5
87184
87182(2)
80085 80079
Model Name
KIT, BEVERAGE STATION, TRIPLE 24 OZ
Model Number
80105
Dwg. Date
04/28/14
94160
80074
86337(4)
81058(4)
10028 10153
80085 87182
DESCRIPTIONQTYPART
4
SCREW, 10-32 X 1/4, PHIL TRUSS HD
4
LOCKWASHER, #10, INTERNAL STAND ASSEMBLY, BEVERAGE STATION180074
481058
FOOT, W/SCREW CAP, PROTECTIVE, .125 x .500486337 HARDWARE, BEV STATION (INCLUDES
180079
10028 & 10153)
1
SHELF, TRIPLE, BEV STAT, INSWEETEN INSWEETEN, 24 OZ, .31 TSP, BAGGED2 INSWEETEN, 24OZ, .7 TSP, BAGGED,WHT187184 EZ-CREAM194160
Loading...