Senwa S750 User Manual

1

S750

User Manual

2

Safety Precautions
Please read the following brief instruction, and carefully
follow these rules to avoid dangerous or violate the law.

Pay attention to traffic safety

Try not to use mobile phones when driving. When the call
is unavoidable, use a personal hands-free kit. Keep the
mobile phone safely on mobile phone holder, do not put it
on the passenger seat or the places where easy to drop
when crashes or emergency brake occur.

Turn off phone in flight

Interference caused by mobile phones may affect flight
safety, it is illegal to use mobile phone in aircraft. Please
turn off your mobile phone by air.

Turn off phone in a blasting area

Abiding by the relevant laws or regulations, turn off your
mobile phone in Blasting areas or in the vicinity of blasting
operations,

Turn off phone near the dangerous goods

Please turn off your mobile phone at the gas station and
close to the places where put dangerous goods like fuel
and chemical agents.

In the hospital

The use of mobile phone must comply with the relevant
provisions or regulations of the hospital. Phone must be
turned off near medical equipment. Operation of any radio
transmitting equipment may cause interference on hearing
aids or implanted medical devices (for example: Cardiac
pacemakers, cochlear implants, etc.).If necessary, consult

3

your medical equipment provider and follow their
instructions.

Interference

The performance of all the mobile phones may be
impacted by radio interference.

Professional Services
Only qualified personnel could install or repair mobile
phones. Self-install or repair mobile phones may bring
great danger, and violation of the warranty provisions.

Accessories and batteries

Only the accessories and batteries approved by
manufacturer can be used.

Rational use

Using a mobile phone in the normal way. Never put your
mobile phone in extreme high temperature environments
(above 60 °C), for example, place it in the window of high
temperature exposed to direct sunlight. Use a damp or
antistatic cloth to wipe your phone. Do not use a dry cloth
or cloth with static electricity to wipe your phone, and do
not bring mobile phone in welding work.

Emergency call

Make sure mobile phone is switched on and in service,
enter the emergency number, such as 112, etc, and press
dial key into calling interface. Then give your location, and
a brief description of what happens, please do not
terminate the call without permission.

Note: As with any mobile phone, its characteristics may

4

not be supported due to network coverage or wireless
signal transmission, some networks do not even support
the 112 emergency call service. Thus, we should not rely
solely on mobile phone for particularly critical
communications (eg medical emergencies). Check and
consult with your local network operator.

CATALOGUE

SAFETY PRECAUTIONS

CATALOGUE ................................................. 0

2.1 YOUR MAIN SCREEN .............................. 10

NOTE: ......................................................... 10

2.2 BACKUP AND RESTORE .......................... 11

2.3BROWSER ............................................... 11

2.4 CALCULATOR ........................................ 12

2.5 CALENDAR ............................................ 12

TO ADD AN EVENT TO YOUR CALENDAR ...... 12

2.6 CAMERA ................................................ 12

2.21 MESSENGER ........................................ 21

2.22 NEWS &WEATHER ............................... 21

2.23 CONTACT ............................................. 22

2.26 PLAY STORE ........................................ 25

2.27SEARCH ................................................ 25

2.33 WHATSAPP .......................................... 30

1

2.34 YOUTUBE ............................................ 30

APPENDIX B：TAKE GOOD CARE OF YOUR

MOBILE PHONE ............................................ 31

APPENDIX F: OTHER ................................ 35

2

1. Install SIM card and memory card

■ 1.1 First Call

1> Insert the SIM card (turn off the mobile phone first). For
detailed installation instructions, please refer
to "1.2 Installing the SIM card."
2> Charging the battery of mobile phone. Please refer to
"1.4 Battery and Charging."
3> Press and hold the power button a little longer to open
mobile phone.
4> If unlock pattern is requested to input on the screen,
then enter the pattern you set to unlock
5> If PIN code is requested to input on the screen, then
enter your PIN code (PIN code is usually supplied with the
SIM card) and press "OK".
6> If unlock code is requested to input on the screen, then
enter the unlock code and press "Enter".
7> Touch the phone icon on the screen to bring up the dial
pad, input the phone number and press the dial button.
Note: You must first insert a valid SIM card and charge
the battery before using mobile phone.

■ 1.2 Install SIM card
There are a lot of data stored in your SIM card like phone

number, PIN (Personal Identification Number), PIN2, PUK
(PIN Unblocking Key), PUK2 (PIN2 Unblocking Key) and
IMSI (International Mobile Subscriber Identity) number
and network information, contact data, and SMS data.
Note:

· At present, operators do not provide PIN2 and PUK2

code in China. Please note it may not use the function
involved above codes in mobile phone·

3

· Turn off your mobile phone and wait a few seconds, then

remove or insert the SIM card.

· Be careful with SIM card, it is easy to damage SIM card

due to friction or bend.

· Please note that mobile phone and its other small

accessories like SIM card should be well preserved, and
should be placed in the places where children cannot be
reached.
WARNING: Please turn off mobile phone before inserting
or removing the SIM card. Otherwise, it may damage the
SIM card memory.

Steps:
1> Keep the phone switched on, press and hold the power
key a little longer to turn off phone, then open battery
cover and remove the battery.
2> Please note in installation that SIM card should be
inserted in accordance with the battery compartment silk
screen icon, push the SIM card into SIM1/SIM2 slot
carefully and slowly .

■ 1.3 Install memory card

Keep the phone switched on, press and hold the power
button a little longer to turn off the phone, take out battery
cover and remove battery, push T-flashcard in the
direction of the arrows.

■ 1.4 Battery and charging

Battery indicator
1> Your mobile phone can monitor and display information
about the battery.
Under normal circumstances, the remaining battery power
can be showed in the battery meter icon placed in the

4

upper right corner of display.
2> When the battery is charging, the battery power is in a
state of change showed in battery meter icon until fully
charged.
Note: The actual standby time and talk time are related to
mobile phone usage, local network environment, SIM card
and actual settings of phone.

Battery Tips
Do not put the battery of your phone in the places where
the temperature is too high or too low, because it will affect
battery life, and will shorten the battery standby time.
Phone battery life has limited time, if you found a
downward trend in the performance of the battery after
use for some time, we recommend to replace it timely with
the original battery specified by this company.

Use Travel Charger

Travel Charger can charge the battery via mobile phone.
Connect the USB output of travel charger with USB data
cable 1> then connect the USB data cable with I / O port of
mobile phone.
2> Plug the travel charger into a suitable main socket.

3> When the battery is charging, the battery power is in a

state of change showed in battery meter icon until fully
charged.
4> When charging is completed, the battery icon stops
change, then you can pull out the charger plug.

Note:

•If the battery voltage is too low to make the mobile phone
switch on, battery icon will change after loner time
charging.

•Mobile phones can be turned on or off during charging.
Warning:

5

1. Make sure that the standard voltage and power of your
location match with the nominal voltage and power of your
travel charger.

2. please use the phone supporting charger cable, it may
cause unpredictable consequences if you use a
non-matching charger cable.
If you do not meet these requirements for charging, it may
lead to failure and damage on power supply equipment
and mobile phone, even other unpredictable
consequences.

Battery Handling Precautions

1>Turn off your mobile phone before removing the battery.
2> Please be careful to use the battery. It will cause short
circuit if you connect positive (+) and negative (-) pole of
battery with metal objects (coins, clips, etc.), and may
also damage the battery and metal items. Remove the
battery from the phone to your bag should be careful not
to have metal objects (such as keys) which will both touch
the positive and negative pole of battery.
3> Do not put the battery into fire, nor in the places where
temperature is extreme high.
4> Do not disassemble or modify the battery.
5> not put the battery into place where strong mechanical
shock, and do not puncture the battery with hard object.
6> Battery should be stored in a cool and dry place, do not
put it in the high temperature region (over 60 degrees C),
keep it away from direct sunlight.
7> If you find any odor or overheating, you should stop
using the battery.
8> If you find that there are any cracks, deformation, or
other type of damage or electrolyte leakage on the battery,
please stop using the battery immediately.
9> If leaked electrolyte gets on your skin or clothing, wash
with soap and water immediately; if it is splashed into eyes

6

accidentally, rinse thoroughly with fresh water and
immediately contact with the hospital treatment.
10> In order to avoid damage caused by error charging,
only the original battery specified by our company can be
used to charge in mobile phone
11> Do not put lithium battery under very low temperature
at which it cannot achieve the maximum standby / talk
time .
12> Do not use water or organic solvents to clean the
battery, and do not immerse it in water.
13> If the battery won`t be used for a long time, fully
charge it before storage.
14> The proposal to return used batteries to the mobile
phone manufacturer or placed in the designated area of
public waste battery recycling, do not mix them with other
waste or discard.

■ 1.5 Use of personal hands-free kit

With personal hands-free kit, you can make calls without
holding a mobile phone. When you insert the personal
hands-free kit into headset jack, it will play the receiver
and microphone of mobile phone.

2. Your mobile phone

7

8

Tip!The following features may be required to connect
network and use memory card, please insert the SIM
card and memory card, and consult your network
operator or service provider if the required services
and its charging standard provided.

The small icon in this brochure may be changed because
Of software upgrades, desktop switching and other

9